Natural jute laminate for the improvement of strength properties of concrete specimen

• Autorzy: Zulfikar Achmad Jusuf , Yaakob Mohd Yuhazri , Umarfaruq Hel Mee , Syah Rahmad

Identyfikatory

DOI

10.24423/EngTrans.3120.20231017

• Języki publikacji: EN

Abstrakty

EN

In the last decade, the exploration and investigation of natural ingredients as alternative materials for metal substitutes have been continuously conducted to produce eco-friendly products with sufficiently good strength. The climate and geography of countries like Indonesia provide that such materials are available abundantly and can be easily replanted. Thus, these materials have considerable potential for application in various products. The purpose of this study is to analyze the compressive and tensile strength of a cylindrical column concrete structure reinforced externally with laminate composite materials derived from jute fabric sheets. The specimen manufacturing method uses a vacuum bagging technique with the specimen size specified in the ASTM C39 test standard. After manufacturing, the specimens underwent the treatment of immersion in clean water for 28 days, followed by drying at room temperature for additional 28 days. The column concrete specimens were wrapped with laminate composite materials with variations in several layers of jute fabric. Compressive strength and splitting tensile tests were conducted according to ASTM C39 and ASTM C496 test standards, respectively. The test results showed that applying laminate composite sheaths on the outer surface of the column concrete structure resulted in an increase in strength of up to 100% for both compressive strength and splitting tensile strength. The magnitude of such an increase in strength is reported in this article.

Słowa kluczowe

EN

natural fiber composite; jute fabric; compressive strength; splitting tensile strength; vacuum bagging.

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2023
• Tom: Vol. 71, iss. 4
• Strony: 507--518
• Opis fizyczny: Bibliogr. 24 poz., rys., tab., wykr.

Twórcy

autor

Zulfikar Achmad Jusuf

• Faculty of Industrial and Manufacturing Technology and Engineering Universiti Teknikal Malaysia Melaka Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
• Excellent Centre of Innovations and New Science, Faculty of Engineering Universitas Medan Area Kolam/Gedung PBSI No.1 St, 20223 Medan Estate, Medan, Indonesia;

autor

Yaakob Mohd Yuhazri

• Faculty of Industrial and Manufacturing Technology and Engineering Universiti Teknikal Malaysia Melaka

autor

Umarfaruq Hel Mee

• Faculty of Industrial and Manufacturing Technology and Engineering Universiti Teknikal Malaysia Melaka Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia

autor

Syah Rahmad

• Excellent Centre of Innovations and New Science, Faculty of Engineering Universitas Medan Area Kolam/Gedung PBSI No.1 St, 20223 Medan Estate, Medan, Indonesia

Bibliografia

• 1. Shekar H.S.S., Ramachandra M., Green composites: A review, Material Today Proceeding, 5(1): 2518–2526, 2018, doi: 10.1016/j.matpr.2017.11.034.
• 2. Kumar N., Kandasami R.K., Singh S., Effective utilization of natural fibres (coir and jute) for sustainable low-volume rural road construction – A critical review, Construction and Building Materials, 347(1): 128606, 2022, doi: 10.1016/j.conbuildmat.2022.128606.
• 3. Saleem M.H. et al., Jute: a potential candidate for phytoremediation of metals – A review, Plants, 9(2): 258, 2020, doi: 10.3390/plants9020258.
• 4. Townsend T., World natural fibre production and employment, [in:] R.M. Kozłowski, M. Mackiewicz-Talarczyk [Eds.], Handbook of Natural Fibres. Volume 1: Types, Properties and Factors Affecting Breeding and Cultivation, Woodhead Publishing Series in Textiles, 2nd ed., Woodhead Publishing, 2020, pp. 15–36, doi: 10.1016/B978-0-12-818398-4.00002-5.
• 5. Ali M.M., Ray B., Rokeya B., Nasreen M.A., Ahmed Z., Potential healing powers with jute plant – A review, International Journal of Sciences: Basic and Applied Research, 48(5): 10–23, 2019.
• 6. Yuhazri M.Y., Zulfikar A.J., Ginting A., Fiber reinforced polymer composite as a strengthening of concrete structures: A review, IOP Conference Series: Materials Science and Engineering, 1003(1): 012135, 2020, doi: 10.1088/1757-899X/1003/1/012135.
• 7. Reddy J.N., Miravete A., Practical Analysis of Composite Laminates, CRC Press, Boca Raton, 2018, doi: 10.1201/9780203742594.
• 8. Talikoti R.S., Kandekar S.B., Strength and durability study of concrete structures using aramid-fiber-reinforced polymer, Fibers, 7(2): 11, 2019, doi: 10.3390/fib7020011.
• 9. Yazdani N., Aljaafreh T., Beneberu E., Concrete beam flexural strengthening with anchored pre-saturated CFRP laminates, Composite Structures, 235: 111733, 2020, doi: 10.1016/j.compstruct.2019.111733.
• 10. Chethan N., Nagesh S.N., Sunith Babu L., Mechanical behaviour of kenaf-jute-E-glass reinforced hybrid polymer composites, Materials Today: Proceedings, 46(11): 4454–4459, 2019, doi: 10.1016/j.matpr.2020.09.679.
• 11. Sujon Md. A.S., Habib M.A., Abedin M.Z., Experimental investigation of the mechanical and water absorption properties on fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites, Journal of Materials Research and Technology, 9(5): 10970– 10981, 2020, doi: 10.1016/j.jmrt.2020.07.079.
• 12. Ganesan K. et al., Assessment on hybrid jute/coir fibers reinforced polyester composite with hybrid fillers under different environmental conditions, Construction & Building Materials, 301: 124117, 2021, doi: 10.1016/j.conbuildmat.2021.124117.
• 13. Nagaraj C., Mishra D., Reddy J.D.P., Estimation of tensile properties of fabricated multi layered natural jute fiber reinforced E-glass composite material, Material Today Proceedings, 27(Part 2): 1443–1448, 2020, doi: 10.1016/j.matpr.2020.02.864.
• 14. Gere J.M., Mechanics of Materials, 6th ed., Thomson Learning, Inc., 2017.
• 15. Mahjoub R., Yatim J.M., Sam A.M., Zulkarnain N.A., Raftari M., The use of kenaf fiber reinforced polymer to confine the concrete cylinder, Material Today Proceedings, 3(2): 459–463, 2016, doi: 10.1016/j.matpr.2016.01.130.
• 16. Yu Q.Q., Li X., Gu X.L., Durability of concrete with CFRP wrapping, MATEC Web of Conferences, 199: 09009, 2018, doi: 10.1051/matecconf/201819909009.
• 17. Wayadande U., Pol C.B., CFRP application in retrofitting of RCC column, International Research Journal of Engineering and Technology (IRJET), 5(6): 1304–1309, 2018.
• 18. Mohammed A.A., Manalo A.C., Maranan G.B., Muttashar M., Zhuge Y., Vijay P.V, Pettigrew J., Effectiveness of a novel composite jacket in repairing damaged reinforced concrete structures subject to flexural loads, Composite Structures, 233: 111634, 2020, doi: 10.1016/j.compstruct.2019.111634.
• 19. Sharif S.K.K., Shikkeri S.B., Rajanikanth K., Mechanical characterization of Jute/Banana/Epoxy reinforced laminate composite, Materials Today: Proceedings, 27: 835–839, 2020, doi: 10.1016/j.matpr.2019.12.379.
• 20. Nguyen L.N. et al., Biomethane production from anaerobic co-digestion at wastewater treatment plants: A critical review on development and innovations in biogas upgrading techniques, Science of The Total Environment, 765: 142753, 2021, doi: 10.1016/ j.scitotenv.2020.142753.
• 21. Montgomery D.C., Runger G.C., Applied Statistics and Probability for Engineers, 5th ed., John Wiley & Sons, Inc., 2023.
• 22. Struble L., Livesey P., Del Stroher P., Bye G., Portland Cement, 3rd ed., ICE Publishing, 2011, doi: 10.1680/pc.36116.
• 23. Islam M.S., Ahmed S.J., Influence of jute fiber on concrete properties, Construction & Building Materials, 189: 768–776, 2018, doi: 10.1016/j.conbuildmat.2018.09.048.
• 24. Salman S.D., Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications, Defence Technology, 16(6): 1098– 1105, 2020, doi: 10.1016/j.dt.2019.11.013.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).