Synthesis of hydroxyapatite in the presence of anionic surfactant

• Autorzy: Kolodziejczak-Radzimska A. , Samuel M. , Paukszta D. , Piasecki A. , Jesionowski T.

Identyfikatory

DOI

10.5277/ppmp140119

• Języki publikacji: EN

Abstrakty

EN

Hydroxyapatite was synthesized by precipitation method using an anionic surfactant (SDS) template, at ambient temperature and normal pressure. Phosphoric acid and disodium phosphate were used as a precursor of phosphorous, whereas calcium hydroxide and chloride were used as a precursor of calcium. The obtained hydroxyapatite was subjected to a wide range of physicochemical analysis using various measurement techniques. In order to get information about the properties of the obtained products, the following analysis of characteristics was performed: dispersion (NIBS), morphological (SEM), adsorptive (BET) and structural (XRD). Energy-dispersive X-ray spectroscopy and elemental analysis were also applied.

Słowa kluczowe

EN

hydroxyapatite; precipitation; anionic surfactant

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Physicochemical Problems of Mineral Processing
• Rocznik: 2014
• Tom: Vol. 50, iss. 1
• Strony: 225--236
• Opis fizyczny: Bibliogr. 23 poz., rys.

Twórcy

autor

Kolodziejczak-Radzimska A.

• Poznan University of Technology, Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, M. Skłodowskiej-Curie 2, PL-60-965, Poznan, Poland

autor

Samuel M.

• Poznan University of Technology, Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, M. Skłodowskiej-Curie 2, PL-60-965, Poznan, Poland

autor

Paukszta D.

• Poznan University of Technology, Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, M. Skłodowskiej-Curie 2, PL-60-965, Poznan, Poland

autor

Piasecki A.

• Poznan University of Technology, Faculty of Mechanical Engineering and Management, Institute of materials Science and Engineering, Jana Pawła II 24, PL-60-965, Poznan, Poland

autor

Jesionowski T.

• Poznan University of Technology, Faculty of Mechanical Engineering and Management, Institute of materials Science and Engineering, Jana Pawła II 24, PL-60-965, Poznan, Poland

Bibliografia

• 1. AFSHAR A., GHORBANI M., EHSANI N., SAERI M.R., SORRELL C.C., 2003, Some import ant factors in the wet precipitation process of hydroxyapatite, Materials and Design, 24, 197–202.
• 2. CHENG, H.N., GROSS R.A., 2010, Green polymer chemistry: biocatalysis and biomaterials, ACS Symposium Series, American Chemical Society, Washington, DC, Chapter 1, 1–14.
• 3. CHO J.S., RHEE S.H., 2011, The densification mechanism of hydroxyapatite particles during spray pyrolysis with variable carrier gas rates of flow, Journal of Biomedical Materials Research B: Applied Biomaterials, 2, 493–500.
• 4. COELHO J.M., MOREIRA J.A., ALMEIDA A., MONTEIRO F.J., 2010, Synthesis and characterization of HAp nanorods from a cationic surfactant template method, Journal of Materials Science: Materials in Medicine, 21, 2543–2549.
• 5. FERRAZ M.P., MONTEIRO F.J., MANUEL C.M., 2004, Hydroxyapatite nanoparticles: a review of preparation methodologies, Journal of Applied Biomaterials & Biomechanics, 2, 74–80.
• 6. JOSCHEK S., NIES B., KROTZ R., GOPFERICH A., 2000, Chemical and physicochemical characterization of porous hydroxyapatite ceramics made of natural bone, Biomaterials, 21, 1645–1658.
• 7. LIU Y., HOU D., WANG G., 2004, A simple wet chemical synthesis and characterization of hydroxyapatite nanorods, Material Chemistry and Physics, 86, 69–73.
• 8. MA T., XIA Z., LIAO L., 2011, Effect of reaction system and surfactant additives on the morphology evolution of hydroxyapatite nanorods obtained via a hydrothermal route, Applied Surface Science, 257, 4384–4388.
• 9. NUNES C.R., SIMSKE S.J., SACHADEVA R., WOLDORD L.M., 1997, Long-term ingrowth and apposition of porous hydroxyapatite implants, Journal of Biomedical Material Research, 36, 560–563.
• 10. LEGEROS R.Z., 2008, Calcium phosphate-based osteoinductive materials, Chemical Reviews, 108, 4742–4753.
• 11. OOI C.Y., Hamdi M., RAMESH S., 2007, Properties of hydroxyapatite produced by annealing of bosine bone, Ceramics International, 33, 1171–1177.
• 12. SADAT-SHOJAI M., KHORASANI M.-T., DINPANAH-KHOSHDARGI E., JAMSHIDI A., 2013,
• 13. Synthesis methods for nanosized hydroxyapatite with diverse structures, Acta Biomaterialia, 9, 7591–7621.
• 14. SALARIAN M., SOLATI-HASHJIN, SHAFIEI S.S., GOUDARZI A., SALARIAN R., NEMATI A., 2009, Surfactant-assisted synthesis and characterization of hydroxyapatite nanorods under hydrothermal conditions, Materials Science-Poland, 27, 961–972.
• 15. SALMA K., BERZINA-CIMDINA L., BORODAJENKO N., 2010, Calcium phosphate bioceramics prepared from wet chemically precipitated powders, Processing and Application of Ceramics, 4, 45–51.
• 16. SHANTI P.M.S.L., ASHOK M., BALASUBRAMANIAN T., RIYASDEEN A., AKBARSHA M.A., 2009, Synthesis and characterization of nan-hydroxyapatite at ambient temperature using cationic surfactant, Materials Letters, 63, 2123–2125.
• 17. SHI D., 2004, Biomaterials and tissue engineering, Springer Berling Heidelberg, Germany
• 18. TARI N.E., MOTLAGH M.M.K., SOHRABI B., 2011, Synthesis of hydroxyapatite particles in cationic mixed surfactants template, Materials Chemistry and Physics, 131, 132–135.
• 19. WANG Y.J., CHEN J.D., WEI K., ZHANG S.H., WANG X.D., 2006, Surfactant-assisted synthesis of hydroxyapatite particles, Materials Letters, 60, 3227–3231.
• 20. WANG Y., ZHANG S, WEI K, ZHAO N., CHEN J., WANG X., 2006, Hydrothermal synthesis of hydroxyapatite nanopowders using cationic surfactant as a template, Materials Letters, 60, 1484–1487.
• 21. YAN L., LI Y., DENG Z.X., ZHUANG J., SUN X., 2001, Surfactant-assisted hydrothermal synthesis of hydroxyapatite nanorods, International Journal of Inorganic Materials, 3, 633–637.
• 22. YU G., SHAO W., 2011, Synthesis of hydroxyapatite assisted by surfactants, 4th International Conference on Biomedical Engineering and Informatics (BMEI), 1260–1263.
• 23. ZHAO J., LIU J., JIANG J., 2009, Interaction between anionic and cationic gemni surfactants at air/water interface and in aqueous bulk solution, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 350, 141–146.