PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A Circuit Model to a Directive Triangular EBG Antenna

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this paper, we propose a directive triangular EBG antenna. This approach is derived from using an EBG surface near to a triangular patch with two grilles. The antenna frequency chosen is the 2.45GHz. The directive antenna is simulated by using HFSS and Electrical model. This proposed antenna presents a very high directivity.
Słowa kluczowe
Twórcy
autor
  • Unit of Research Cuircuits and Electronics System High Frequency, Faculty of Science, University El Manar, Tunis, Tunisia
  • Unit of Research Cuircuits and Electronics System High Frequency, Faculty of Science, University El Manar, Tunis, Tunisia
Bibliografia
  • [1] F. Yang and Y. Rahmat-Samii, Electromagnetic Band Gap structure in Antenna Engineering. Cambridge University Press, 2009.
  • [2] “Microstrip antennas integrated with electromagnetic band-gap (EBG) structures: A low mutual coupling design for array applications” IEEE Transactions on Antennas Propagation, vol. 51, no. 10, pp. 2936-2946, October 2003.
  • [3] A. E. I. Lamminen, A. R. Vimpari, and J. Saily, “UC-EBG on LTCC for 60-GHz frequency band antenna applications” IEEE Transactions on Antennas Propagation, vol. 57, no. 10, pp. 2904-2912, October 2009.
  • [4] R. Baggen, M. Martinez-Vazquez, J. Leiss, S. Holzwarth, L. S. Drioli and P. deMaagt, “Low profile Galileo antenna using EBG technology” IEEE Transactions on Antennas Propagation, vol. 56, no. 3, pp. 667-674, March 2008.
  • [5] L. Li, X. J. Dang, B. Li, and C. H. Liang, “Analysis and design of waveguide slot antenna array integrated with electromagnetic band-gapstructures” IEEE Antennas Wireless Progagation Letters, vol. 5, pp. 111-115, 2006.
  • [6] Q. R. Zheng, Y. Q. Fu, and N. C. Yuan, “A novel compact spiral electromagnetic band-gap (EBG) structure” IEEE Transactions on Antennas Propagation, vol. 56, no. 6, pp. 1656-1660, June 2008.
  • [7] Y. Rahmat-Samii, “The Marvels of Electromagnetic Band Gap (EBG) Structures” Applied Computational Electromagnetics Society Journal, vol. 18, no. 3, pp. 1-10, 2003.
  • [8] A. R. Weily, K. P. Esselle, T. S. Bird, and B. C. Sanders, “Dual resonator 1-D EBG antenna with slot array feed for improved radiation bandwidth” IET Microwaves, Antennas and Propagation, vol. 1, no. 1, pp. 198-203, 2007.
  • [9] E. L. Qiu, F. Zhao, K. Xiao, S.-L. Chai, and J.-J. Mao, “Transmit-Receive Isolation Improvement of Antenna Arrays by Using EBG Structures” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 93-96, 2012.
  • [10] E. L. W. Cao, B. Zhang, A. Liu, T. Yu, D. Guo, and X. Pan, “Multi-Frequency and Dual-Mode Patch Antenna Based on Electromagnetic Band-gap (EBG) Structure” IEEE Antennas and Propagation, vol. 60, no. 12, pp. 6007-6012, December 2012.
  • [11] M. Kim, K. Koo, J. Kim, and J. Kim, “Vertical Inductive Bridge EBG (VIB-EBG) Structure With Size Reduction and Stopband Enhancement for Wideband SSN Suppression” IEEE Antennas and Wireless Propagation Letters , vol. 22, pp. 403-405, 2012.
  • [12] L. Li, et al, “Locally Resonant Cavity Cell Model for Electromagnetic Band Gap Structures” IEEE Transactions On Antennas And Propagation, vol. 54, no. 1, January 2006.
  • [13] D. Sievenpiper, et all, “High-impedance surface electromagnetic surfaces with a forbidden frequency band” IEEE Transactions on Microwave Theory and Techniques, vol. 47, no. 11, pp. 2059-2074, November 1999.
  • [14] C. R. Simovski and A. A. Sochava, “High-impedance surfaces based on self resonant grids. analytical modeling and numerical simulations” Progress In Electromagnetics Research, pp. 239-256, 2003.
  • [15] A. Ferchichi, N. Fadlammah, and A. Gharsallah, “Novel electrical model to an antenna array” in 27th Annual Review of Progress in Applied Computational Electromagnetics ACES, USA, Williamsburg, Virginia, 27-31 March 2011, pp. 689-694.
  • [16] A. Ferchichi, N. Fadlallah, N. Sboui, and A. Gharsallah, “Analysis and design of Printed Fractal Antenna by Using an Adequate Electrical Model” International Journal of Communication Networks and Information Security IJCNIS, vol. 1, no. 3, December 2009.
  • [17] A. Ferchichi and A. Gharsallah, “Analysis of a square parasitic antenna by using lumped element” International Journal of electronics and telecommunication, vol. 58, no. 3, September 2012.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1139e8ae-7e40-478a-b7de-b31ce783014d
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.