Effects of B content on wear and corrosion resistance of laser-cladded Co-based alloy coatings

• Autorzy: Xia Rong , Zhang Kun , Shu Fengyuan , Zhang Xin , Yan Liying , Li Cheng

Identyfikatory

DOI

10.2478/msp-2023-0011

• Języki publikacji: EN

Abstrakty

EN

To improve the surface properties of Ti alloy, (Co₃₄Fe₈Cr₂₉Ni₈Si₇)_100–x B_x alloy, coatings were prepared by laser cladding. The coatings—mainly composed of TiCr, Fe_0.1Ti_0.18V_0.72, CoTi, Ti₂Ni, and TiB—and amorphous phases were investigated in terms of microstructure, wear resistance, and corrosion resistance. The results showed that the microhardness of the Co-based coatings first increased and then decreased with the increase of B content. When the B content was 6%, the microhardness of the coating increased up to 1210 HV_0.2 which was 3.4 times that of TC4 alloy substrate. The coatings exhibited diverse wear mechanisms that gradually transitioned from severe fatigue spalling and oxidative wear to slightly abrasive wear. The corrosion current density of Co-based coatings in 3.5 wt% NaCl solution first increased and then decreased as B contents increased. Coatings with 4% B content, however, exhibited the best corrosion resistance, which was most suitable for improving the corrosion resistance of Ti alloy.

Słowa kluczowe

EN

laser cladding; Co-based coating; B content; wear resistance; corrosion resistance

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2023
• Tom: Vol. 41, No. 4
• Strony: 13--23
• Opis fizyczny: Bibliogr. 42 poz., rys., tab.

Twórcy

autor

Xia Rong

• State Power Investment Group Jiangsu Electric Power Co., Ltd, Nanjing 210008, China

autor

Zhang Kun

• Chinergy Co., Ltd, Beijing 100193, China

autor

Shu Fengyuan

• School of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China

autor

Zhang Xin

• Institute of New Energy Technology, State Power Investment Corporation Central Research Institute, Beijing 102209, China

autor

Yan Liying

• Beijing Aviation Industry Energy Green Power Technology Co., Ltd, Beijing 100011, China

autor

Li Cheng

• State Power Investment Group Jiangsu Electric Power Co., Ltd, Nanjing 210008, China

Bibliografia

• [1] Benea L, Danaila EM, Celis JP. Increasing the tribological performances of Ti-6Al-4V alloy by forming a thin nanoporous TiO2 layer and hydroxyapatite electrodeposition under lubricated conditions. Tribol Int. 2014;78:168–175.
• [2] Yuan K. A study on RE boronizing process in a titanium alloy. J Therm Spray Techn. 2021;30(4):977–86.
• [3] Ananth MP, Ramesh R. Reciprocating sliding wear performance of hard coating on modified titanium alloy surfaces. Tribol Trans. 2015;58: 169–76.
• [4] Monisha K, Shariff SM, Sekar A, Raju R, Manonmani J, Senthilselvan J. Titanium boride coating by high power diode laser alloying of amorphous boron with titanium and its surface property investigations. Opt Laser Technol. 2024;170:110159.
• [5] Yusenko KV, Riva S, Carvalho PA, Yusenko MV, Arnabold S, Sukhik AS, et al. First hexagonal close packed high-entropy alloy with outstanding stability under extreme conditions and electrocatalytic activity for methanol oxidation. Scr Mater. 2017;138:22–7.
• [6] He F, Wang ZJ, Shang SL, Leng C, Li JJ, Wang JC. Stability of lamellar structures in CoCrFeNiNbx eutectic high entropy alloys at elevated temperatures. Mater Design. 2016;104:259–64.
• [7] Kravchenko IN, Kartsev SV, Kolomeichenko AV, Kuznetsov YA, Perevislov SN, Markov MA. Metallurgical features of plasma surfacing with powder hard alloy with addition of aluminum powder. Metallurgist. 2021;64(9):1077–85.
• [8] Ma GZ, Chen SY, Wang HD. Micro process and quality control of plasma spraying [M]. Springer Nature. 2022.
• [9] Chang CH, Yang CB, Sung CC, Hsu CY. Structure and tribological behavior of (AlCrNbSiTiV) N film deposited using direct current magnetron sputtering and high-power impulse magnetron sputtering. Thin Solid Films. 2018;668:63–8.
• [10] Yuan WY, Li RF, Chen ZH, Gu JY, Tian YT. A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings. Surf Coat Technol. 2021;405:126582.
• [11] Cui X, Zhang S, Wang C, Zhang CH, Chen J, Zhang JB. Effects of stress-relief heat treatment on the microstructure and fatigue property of a laser additive manufactured 12CrNi2 low alloy steel. Mater Sci Eng A. 2020;791:139738.
• [12] Li X, Zhang CH, Zhang S, Wu CL, Liu Y, Zhang JB, Babar Shahzad M. Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology. Opt Laser Technol. 2019;114:209–15.
• [13] Nguyen T, Ly X, Huang M, Qin Y, Yang S. Fabrication and characterization of AlxFeMnNiCrCu0.5 (x = 0.0; 0.5; 1.0) high-entropy alloy coatings by laser cladding [J]. J Therm Spray Technol. 2022:1–11.
• [14] Zhang P, Liu XJ, Lu WL, Zhai WZ, Zhou MZ, Wang J. Fretting wear behavior of CuNiAl against 42CrMo4 under different lubrication conditions. Tribol Int. 2017;117:59–67.
• [15] Dey D, Bal KS, Khan I, Bangia I, Singh AK, Roy Choudhury A. Study of tribo-mechanical properties of laser clad Al2O3-TiB2-TiN-BN||Ti-6Al-4 V alloy. Opt Laser Technol. 2022;150:107982.
• [16] Cui X, Zhang S, Wang C, Zhang CH, hen J, Zhang JB. Microstructure and fatigue behavior of a laser additive manufactured 12CrNi2 low alloy steel. Mat Sci Eng A. 2019;772:138685.
• [17] Debta MK, Masanta M. Effect of stand-off-distance on the performance of TIG cladded TiC-Co coating deposited on Ti-6Al-4V alloy. Surf Coat Technol. 2022;434:128210.
• [18] Salman WD, Chiad JS. In review on: laser shock peening and nano-technology: its effects on wear and hot corrosion resistance, fatigue resistance and vibration fatigue life enhancement. AIP Conf Proc. 2023; 2977.
• [19] Zou Y, Ma BG, Cui HC, Lu FG, Xu PQ. Microstructure, wear, and oxidation resistance of nanostructured carbide-strengthened cobalt-based composite coatings on Invar alloys by laser cladding. Surf Coat Technol. 2019:381:125188.
• [20] Ou W, Xiong J, Peng Y, Xu J, Chen Z, Zhang H, et al. Transformation of carbides and mechanisms for cracking in Co-based alloy surfacing layer during thermal fatigue. Mater Charact. 2023;201:112971.
• [21] Shu FY, Wu L, Zhao HY, Sui SH, Zhou L, Zhang J, et al. Microstructure and high-temperature wear mechanism of laser cladded CoCrBFeNiSi high-entropy alloy amorphous coating. Mater Lett. 2017;211:235–8.
• [22] Li W, Xu PQ, Wang YY, Zou Y, Gong JY, Lu FG. Laser synthesis and microstructure of micro- and nanostructured WC reinforced Co-based cladding layers on titanium alloy. J Alloy Compd. 2018;749:10–22.
• [23] Weng F, Yu HJ, Chen CZ, Liu JL, Zhao LJ, Dai JJ. Fabrication of Co-based coatings on gitanium alloy by laser cladding with CeO2 addition. Mater Manuf Process. 2016;31(11):1461–7.
• [24] Kulka M, Makuch N, Dziarski P, Piasecki A, Miklaszewski A. Microstructure and properties of laser-borided composite layers formed on commercially pure titanium. Opt Laser Technol. 2013;56:409–24.
• [25] Zhang L, Wang CS, Han LY, Dong C. Influence of laser power on microstructure and properties of laser clad Co-based amorphous composite coatings. Surf Interface. 2017;6:18–23.
• [26] Aguilar-Hurtado JY, Vargas-Uscategui A, Paredes-Gil K, Palma-Hillerns R, Tobar MJ, Amado JM. Boron addition in a non-equiatomic Fe50Mn30Co10Cr10 alloy manufactured by laser cladding: microstructure and wear abrasive resistance. Appl Surf Sci. 2020;515:146084.
• [27] Zong L, Guo N, Li RG, Yu HB. Effect of B content on microstructure and wear resistance of Fe-3Ti-4C hardfacing alloys produced by plasma-transferred arc welding. Coatings. 2019;9:265.
• [28] Li B, Pan D, Zhang X, Liu L, Gao L, Li S, et al. Deformation behavior of TiB reinforced Ti and Ti6Al4V composite particles under in-situ microcompression, Mater Sci Eng A. 2024;890:145903.
• [29] Zhang ZL, Zhao Y, Chen Y, Su Z, Shan JG, Wu AP, et al. The role of the pulsed-wave laser characteristics on restraining hot cracking in laser cladding non-weldable nickel-based superalloy. Mater Des. 2020;198:109346.
• [30] Katayama S. Solidification phenomena of weld metals (1st report). Characteristic solidification morphologies, microstructures and solidification theory. J Light Met Weld Construct. 2000;14:939–51.
• [31] Ma GZ, Xu BS, Wang HD, Wang XH, Li GL, Zhang S. Research on the microstructure and space tribology properties of electric-brush plated Ni/MoS2–C composite coating. Surf Coat Technol. 2013;221:142–9.
• [32] Wan S, Miao CH, Wang RM, Zhang ZF, Dong ZH. Enhanced corrosion resistance of copper by synergetic effects of silica and BTA codoped in polypyrrole film. Prog Org Coat. 2019;129:187–98.
• [33] Wang WH, Dong C, Shek CH. Bulk metallic glasses. Mater Sci Eng-R. 2008;44:45–89.
• [34] Lin L, Li GL, Wang HD, Kang JJ, Xu ZL, Wang HJ. Structure and wear behavior of NiCr–Cr3C2 coatings sprayed by supersonic plasma spraying and high velocity oxy-fuel technologies. Appl Surf Sci. 2015;356: 383–90.
• [35] Zhou YY, Ma GZ, Wang HD, Li GL, Chen SY, Wang HJ, Liu M. Fabrication and characterization of supersonic plasma sprayed Fe-based amorphous metallic coatings. Mater Des. 2016;110:332–9.
• [36] Chu JP, Jang J,Huang JC, Chou HS, Yang Y, Ye JC, et al. Thin film metallic glasses: unique properties and potential applications. Thin Solid Films. 2012;520:5097–122.
• [37] Ma HR, Chen XY, Li JW, Chang CT, Wang G. Fe-based amorphous coating with high corrosion and wear resistance. Surf Eng. 2017;33:56–62.
• [38] Bing Y, Yong DU, Yong LIU. Recent progress in criterions for glass forming ability. T Nonferr Metal Soc. 2009;19:78.
• [39] Nishinagam T. Thermodynamics–for understanding crystal growth. Prog Cryst Growth Charact. Mater. 2016;62:43–57.
• [40] Shu FY, Wang B, Zhao HY, Tan CW, Zhou JL, Zhang J. Effects of line energy on microstructure and mechanical properties of CoCrFeNiBSi high-entropy alloy laser cladding coatings. J Therm Spray Technol. 2020;29(4):789–97.
• [41] Hua DP, Ye WY, Jia Q, Zhou Q, Xia QS, Shi JQ, et al. Molecular dynamics simulation of nanoindentation on amorphous/amorphous nanolaminates. Appl Surf Sci. 2020;511:145545.1–145545.9.
• [42] Shu FY, Tian Z, Zhao HY, He WX, Sui SH, Li B. Synthesis of amorphous coating by laser cladding multilayer Co-based self-fluxed alloy powder. Mater Lett. 2016;176:306–9.