Improving The Surface Quality of Wood After Weathering Through Heat Treatment Using Waste Olive Oil

• Autorzy: Toker Hilmi , Kapçak Mehmet Ali , Altay Çağlar , Baysal Ergün , Özdemir Emir

Identyfikatory

DOI

10.53502/wood-190878

• Języki publikacji: EN

Abstrakty

EN

Experiments were conducted with the aim of improving the surface properties of Oriental beech (Fagus orientalis Lipsky) wood after weathering, including colour, gloss, and roughness, by means of heat treatment with waste olive oil (WOHT). First, WOHT was applied at 200 ℃ and 230 ℃ for 2 and 4 hours. Then, for three months, Oriental beech specimens were exposed to the weather in the Muğla region (Southern Aegean, Türkiye). After weathering, colour, gloss, and roughness tests were performed according to the ASTM D1536-58T (1964), ASTM D 523-14 (2018), and DIN 4768 (1990) standards, respectively. All treatment groups except the control group were found to have positive ΔL* values after weathering. The values of total colour change (ΔE*) for WOHT Oriental beech were better than for the unheated (control) group. The best colour stability was obtained for WOHT Oriental beech heated at 200 ℃ for 4 hours. The glossiness of all specimens decreased after weathering, but the gloss results for WOHT Oriental beech were better than those obtained for the unheated (control) group. Lower temperatures and durations of heat treatment resulted in smaller decreases in the gloss of WOHT Oriental beech on weathering. The roughness of all specimens was increased by weathering, but lower roughness values after weathering were obtained for WOHT Oriental beech than for the control group.

Słowa kluczowe

EN

surface properties; waste olive oil heat treatment; weathering; Oriental beech

• Wydawca: Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
• Czasopismo: Drewno : prace naukowe, doniesienia, komunikaty
• Rocznik: 2024
• Tom: Vol. 67, nr 213
• Strony: Art. no. 190878
• Opis fizyczny: Bibliogr. 52 poz., rys., tab., wykr.

Twórcy

autor

Toker Hilmi

• Faculty of Technology, Department of Wood Science and Technology, Muğla Sıtkı Koçman University, Muğla, Turkey

• https://orcid.org/0000-0002-1900-9887

autor

Kapçak Mehmet Ali

• Faculty of Technology, Department of Wood Science and Technology, Muğla Sıtkı Koçman University, Muğla, Turkey

• https://orcid.org/0000-0002-6890-3201

autor

Altay Çağlar

• Aydın Vocational School, Department of Interior Design, Aydın Adnan Menderes University, Aydın, Turkey

• https://orcid.org/0000-0003-1286-8600

autor

Baysal Ergün

• Faculty of Technology, Department of Wood Science and Technology, Muğla Sıtkı Koçman University, Muğla, Turkey

• https://orcid.org/0000-0002-6299-2725

autor

Özdemir Emir

• Faculty of Technology, Department of Wood Science and Technology, Muğla Sıtkı Koçman University, Muğla, Turkey

• https://orcid.org/0000-0001-7218-0010

Bibliografia

• Ahajji A., Diouf P.N., Aloui F., Elbakali I., Perrin D., Merlin A., George B. [2009]: Influence of heat treatment on antioxidant properties and colour stability of beech and spruce wood and their extractives. Wood Science and Technology 43: 69–83. https://doi.org/10.1007/s00226-008-0208-3
• Aksoy A., Deveci M., Baysal E., Toker H. [2011]: Colour and gloss changes of Scots pine after heat modification. Wood Research 56[3]: 329–336.
• Ayadi N., Lejeune F., Charrier F., Charrier B., Merlin A. [2003]: Colour stability of heat-treated wood during artificial weathering. Holz als Roh- und Werkstoff 61: 221–226. https://doi.org/10.1007/s00107-003-0389-2
• Bak M., Németh R., Tolvaj L. [2012]: The colour change of oil-heat-treated timber during weathering. Óbuda University E-bulletin 3[1]: 339–345.
• Bakar B.F.A., Hızıroğlu S., Tahir P.M., [2013]: Properties of some thermally modified wood species. Materials & Design 43: 348–355. https://doi.org/10.1016/j.matdes.2012.06.054
• Bal B.C. [2016]: Bitkisel yağ ile farklı sıcaklıklarda muamele edilen toros göknarı odununun bazi fiziksel özellikleri. Kahramanmaraş Sütçü İmam Üniversitesi Mühendis-lik Bilimleri Dergisi, 19[2]: 20–26. (In Turkish).
• Baysal E., Değirmentepe S., Şimşek H. [2014a]: Some surface properties of thermally modified scots pine after artificial weathering. Maderas. Ciencia y tecnología 16[3]: 355–364. https://doi.org/10.4067/S0718-221X2014005000028.
• Baysal E., Kart Ş., Toker H., Değirmentepe S. [2014b]: Some physical characteristics of thermally modified oriental-beech wood. Maderas. Ciencia y tecnología 16[3]: 291–298. https://doi.org/10.4067/S0718-221X2014005000022.
• Baysal E., Tomak E.D., Topaloğlu E., Pesman E. [2016]: Surface properties of bamboo and Scots pine impregnated with boron and copper based wood preservatives after accelerated weathering. Maderas. Ciencia y tecnología, 18[2]: 253–264.
• Bekhta P., Niemz P. [2003]: Effect of high temperature on the change in colour, dimensional stability and mechanical properties of spruce wood. Holzforschung 57[5]: 539–546. https://doi.org/10.1515/HF.2003.080
• Bourgios J., Guyonnet R., Janin G. [1991]: La mesure de couleur: Une méthoded’étudeetd’optimisation des transformations chimiques du bois thermolysé, Holzforschung 45[5]: 377–382.
• Bucur V. [2011]: Delamination in wood, wood products and wood-based composites. ISBN: 978-90- 481-9549-7, Springer.
• Cevreonline. [2024]. https://cevreonline.com/bitkisel-atik-yaglar/ Access date: 12 June 2024.
• Deka M., Humar M., Rep G., Kričej B., Šentjurc M., Petrič M. [2008]: Effects of UV light irradiation on colour stability of thermally modified, copper ethanola-mine treated and non-modified wood: EPR and DRIFT spectroscopic studies. Wood Science and Technology 42: 5–20. https://doi.org/10.1007/s00226-007-0147-4
• Denes A.R., Young R.A. [1999]: Reduction of weathering degradation of wood through plasma-polymer coating. Holzforschung 53[6]: 632–640. https://doi.org/10.1515/HF.1999.104
• Dubey M.K., Pang S., Walker J. [2010]: Colour and dimensional stability of oil heat-treated radiata pinewood after accelerated UV weathering. Forest Products Journal, 60[5]: 453–459. https://doi.org/10.13073/0015-7473-60.5.453
• Dubey M.K., Pang S., Walker J. [2012]: Changes in chemistry, colour, dimensional stability and fungal resistance of Pinus radiata D. Don wood with oil heat-treatment. Holzforschung 66[1]: 1–9. https://doi.org/10.1515/HF.2011.117
• Dündar T., As N., Korkut S., Ünsal O. [2008]: The effect of boiling time on the surface roughness of rotary-cut veneers from oriental beech (Fagus orientalis L.). Journal of Materials Processing Technology 199[1–3]: 119–123. https://doi.org/10.1016/j.jmatprotec.2007.07.036
• Grelier S., Castellan A., Kamdem D.P. [2000]: Photoprotection of copper-amine-treated pine. Wood and Fiber Science, 32[2]: 196–202.
• Hızıroğlu S. [1996]: Surface roughness analysis of wood composites: a stylus method. Forest Products Journal, 46[7–8]: 67.
• Hızıroğlu S., Graham M. [1998]: Effect of press closing time and target thickness on surface roughness of par-ticleboard. Forest Products Journal, 48[3]: 50.
• Hill C.A. [2008]: The reduction in the fibre saturation point of wood due to chemical modification using anhydride reagents: a reappraisal.
• Hon D.N.S., Chang S.T. [1985]: Photoprotection of wood surfaces by woodion complexes. Wood and Fiber Science, 17[1]: 92–100.
• Huang X., Kocaefe D., Kocaefe Y., Boluk Y., Pichette A. [2012]: A spectrocolourimetric and chemical study on colour modification of heat-treated wood during artificial weathering. Applied Surface Science, 258[14]: 5360–5369. https://doi.org/10.1016/j.apsusc.2012.02.005
• Jirouš-Rajković V., Miklečić J. [2019]: Heat-treated wood as a substrate for coatings, weathering of heat-treated wood, and coating performance on heat-treated wood. Advances in Materials Science and Engineering, 2019, 1–9. https://doi.org/10.1155/2019/8621486
• Karagöz U., Akyıldız M.H., İşleyen O. [2011]: Effect of heat treatment on surface roughness of thermal wood machined by CNC. Pro Ligno, 7[4]: 50–58.
• Kesik H., Vurdu H., Çağata K., Özkan O., Öncel M. [2015a]: Yağlı Isıl İşlem Görmüş Sarıçam Odunlarında Koruyucu Katmanın Yapışma ve Sertlik Özellikleri. Kastamonu University Journal of Forestry Faculty 15[2]: 261–266. https://doi.org/10.17475/kuofd.34547 (In Turkish).
• Lee S.H., Ashaari Z., Lum W.C., Halip J.A., Ang A.F., Tan L.P., Chin K.L., Tahir P. M. [2018]: Thermal treatment of wood using vegetable oils: A review. Construction and Building Materials, 181: 408–419. https://doi.org/10.1016/j.conbuildmat.2018.06.058 Liu R. [1997]: The influence of didecyldimethylammonium chloride (DDAC) treatment on wood weathering. Uni-versity of British Columbia.
• Mayes D., Oksanen O. [2002]: Thermowood hand-book. Finnforest, Finland, 5, 15.
• Militz H. [2002]: Heat treatment technologies in Europe: scientific background and technological state-of-art. Enhancing the durability of lumber and engineered wood products. Forest Products Society, Kissimmee, FL, USA, February 11 – 13, 2002.
• Militz H., Altgen M. [2014]: Processes and properties of thermally modified wood manufactured in Europe. In Deterioration and protection of sustainable biomaterials [pp. 269–285]. American Chemical Society. https://doi.org/10.1021/bk-2014-1158.ch016
• Müller U., Rätzsch M., Schwanninger M., Steiner M., Zöbl H. [2003]: Yellowing and IR-changes of spruce wood as result of UV-irradiation. Journal of Photo-chemistry and Photobiology B: Biology, 69[2]: 97–105. https://doi.org/10.1016/S1011-1344(02)00412-8
• Özgenç Ö., Hızıroğlu S., Yıldız Ü.C. [2012]: Weathering properties of wood species treated with different coating applications. BioResources, 7[4]: 4875–4888.
• Petrič M., Kricej B., Humar M., Pavlic M., Tomazic M. [2004]: Patination of cherry wood and spruce wood with ethanolamine and surface finishes. Surface Coatings International Part B, 87[3]: 195–202.
• Razak W., Izyan K., Othman S. [2012]: Effectiveness of hot oil treatment on cultivated 15 year-old Acacia hybrid against Coriolus versicolours, Gloeophyllum trabeum and Pycnoporu sanguineus. Sains Malaysiana, 41[2]: 163–169. http://www.ukm.my/jsm/pdf_files/SM-PD...
• Suri I.F., Purusatama B.D., Kim J.H., Yang G.U., Prasetia D., Savero M.A., Park Y., Kim N.H. [2022]: Weathering Properties of Paulownia tomentosa and Pinus koraiensis Woods Heat-Treated in Palm Oil and Air. In: (Conference Proceedings) (pp. 44–44).
• Temiz A., Yıldız Ü.C., Aydın İ., Eikenes M., Alfredsen G., Çolakoglu G. [2005]: Surface roughness and colour characteristics of wood treated with preservatives after accelerated weathering test. Applied Surface Science, 250[1–4], 35–42. https://doi.org/10.1016/j.apsusc.2004.12.019
• Toker H., Baysal E., Türkoğlu T., Kart Ş., Şen F., Peker H. [2016]: Surface characteristics of oriental beech and scots pine woods heat-treated above 200 degrees C. Wood Research, 61[1]: 43–54. https://hdl.han-dle.net/20.500.12809/2770
• Türkoğlu T., Toker H., Baysal E., Kart Ş., Yüksel M., Ergün M.E. [2015]: Some surface properties of heat treated and natural weathered oriental beech. Wood Research, 60[6]: 881–890. https://hdl.handle.net/20.500.12809/3200
• Umar I., Zaidon A., Lee S.H., Halis R. [2016]: Oil-heat treatment of rubberwood for optimum changes in chemical constituents and decay resistance. Journal of Tropical Forest Science, 28[1]:88–96. https://www.jstor.org/stable/43748082
• Ünsal Ö., Ayrılmış N. [2005]: Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood. Jour-nal of Wood Science, 5[4]: 405–409. https://doi.org/10.1007/s10086-004-0655-x
• Williams R.S., Knaebe M.T., Sotos P.G., Feist W.C. [2001]: Erosion rates of wood during natural weathering. Part I. Effects of grain angle and surface texture. Wood and Fiber Science, 31–42.
• Yalınkılıç M.K., İlhan R., Imamura Y., Takahashi M., Demirci Z., Yalınkılıç A.C., Peker H. [1999]: Weathering durability of CCB-impregnated wood for clear
• Toker A. et al.: Improving The Surface Quality of Wood After Weathering Through Heat Treatment… varnish coatings. Journal of Wood Science, 45: 502–514. https://doi.org/10.1007/BF00538961
• Yıldız S., Tomak E.D., Yıldız Ü.C., Ustaömer D. [2013]: Effect of artificial weathering on the properties of heat treated wood. Polymer Degradation and Stability, 98[8]: 1419–1427. https://doi.org/10.1016/j.polymdegrad-stab.2013.05.004
• Yingprasert W., Matan N., Chaowana P. [2015]: Fungal resistance and physico-mechanical properties of cinnamon oil and clove oil-treated rubberwood parti-cleboards. Journal of Tropical Forest Science, 27[1]: 69–79. https://www.jstor.org/stable/43150976
• Zhang X. [2003]: Photo-resistance of alkylammonium compound treated wood (Doctoral dissertation, University of British Columbia). https://open.library.ubc.ca/
• List of standards
• ASTM D, 358-55 [1970]: Standard specification for wood to be used panels in weathering tests of paints and varnishes. Annual Book of ASTM Standard.
• ASTM D1536-58 [1964]: Tentative method of test colour difference using the colour master differential colour-imeter. Annual Book of ASTM Standard.
• ASTM D523-14 [2018]: Standard test method for specular gloss. Annual Book of ASTM Standard.
• DIN 4768 [1990]: Determination of values of surface roughness parameters Ra, Rz, Rq max using electrical contact (stylus) instruments, concepts and measuring conditions.
• PN-ISO 7724-2:2003 Farby i lakiery – Kolorymetria – Część 2: Pomiar barwy