Assessment of surface quality for chosen milling strategies when producing relief surfaces

• Autorzy: Varga J. , Stahovec J. , Beno J. , Vrabeľ M
• Języki publikacji: EN

Abstrakty

EN

The paper deals with design and modeling of the relief surfaces that are produced in milling. Modeled and real surface quality is presented for the chosen fragments of the relief surfaces. Fragmentation of the relief surfaces has been made by the surface sampling. Milling strategies are compared with regard to surface formation. Surface quality was checked with regard to applied cutting conditions.

Słowa kluczowe

EN

relief surface; fragmentation of the surface; milling strategies

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2014
• Tom: Vol. 8, nr 22
• Strony: 37--41
• Opis fizyczny: Bibliogr. 8 poz., fig., tab.

Twórcy

autor

Varga J.

• Department of Technologies and Materials, Faculty of Engineering, Technical University in Košice, Mäsiarska 74, 040 01 Košice, Slovak Republic

autor

Stahovec J.

• Department of Technologies and Materials, Faculty of Engineering, Technical University in Košice, Mäsiarska 74, 040 01 Košice, Slovak Republic

autor

Beno J.

• Department of Technologies and Materials, Faculty of Engineering, Technical University in Košice, Mäsiarska 74, 040 01 Košice, Slovak Republic

autor

Vrabeľ M

• Department of Technologies and Materials, Faculty of Engineering, Technical University in Košice, Mäsiarska 74, 040 01 Košice, Slovak Republic

Bibliografia

• 1. Mansour S.: Automatic generation of part programs for milling sculptured surfaces. Journal of Materials Processing Technology 127, 2002, 31-39.
• 2. Siller H., Rodriguez C.A., Ahuett H.: Cycle time prediction in high-speed milling operations for sculptured surface finishing. Journal of Materials Processing Technology 174, 2006, 355-362.
• 3. Monreal M., Rodriguez C.A.: Influence of tool path strategy on the cycle time of high-speed milling. Computer-Aided Design 35, 2003, 395-401.
• 4. Kim Bo H., Choi Byoung K.: Machining efficiency comparison direction-parallel tool path with contour-parallel tool path. Computer-Aided Design 34, 2002, 89-95.
• 5. Feng H.-Y., Huiwen L.: Constant scallop-height tool path generation for three-axis sculptured surface ma-chining. Computer-Aided Design 34, 2002, 647-654.
• 6. Balázs M., Beňo J., Ižol P., Maňková I.: Surface quality of sculpture surface in case of 3D milling. [online]. Dostupné na internete: <http://www.uni-obuda.hu/users/mikob/2011itc.pdf>.
• 7. Spisak E., Fabian M.: Strojárske technológie s CAx podporou. 1. vydanie. Košice: Technická univerzita v Košiciach, Strojnícka fakulta, 2010, p. 397.
• 8. Svihura P.: Návrh a overenie výroby propagačného predmetu využitím CAD/CAM systémov, TU, SjF, diplomová práca, 2013, p.104.