Credibility of FEM Analysis in the T-Stub Modelling

• Autorzy: Ostrowski K. , Kozłowski A.

Identyfikatory

DOI

10.7862/rb.2018.37

• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of a comparative analysis between numerical calculations of T-stubs of the 3rd stage of FEM models hierarchical validation and the results of laboratory tests. The procedure for the development of the material characteristics used in numerical calculations of FEM models is presented. The scope of this article allows determining the non-linear characteristics of the T-stub which maps the work of the end-plate joint of the beam to the column in the tensile zone. The results of laboratory tests of a series of T-stubs made of rolled profiles (HEB240, HEA240) and of welded profiles (thickness of end-plate: tp = 12 mm and tp = 20 mm) have been presented. The principles of shaping the geometrical features of the FEM model of end-plate joints of the T-stub type are given, with particular emphasis on the shaping of the bolt with a thread. The impact of the bolt thread on the accuracy of the obtained results was assessed. The criterion of reliability of the obtained results with respect to the maximum force in the bolt obtained on the basis of laboratory tests in the axial tensile test of the bolts in the configuration: bolt - washer - nut was formulated.

Słowa kluczowe

EN

T-stub; rotation capacity; material ductility; multistage hierarchical validation; FEM modelling

• Wydawca: Oficyna Wydawnicza Politechniki Rzeszowskiej
• Czasopismo: Czasopismo Inżynierii Lądowej, Środowiska i Architektury / Journal of Civil Engineering, Environment and Architecture
• Rocznik: 2018
• Tom: z. 65, nr 2
• Strony: 219--232
• Opis fizyczny: Bibliogr. 27 poz., rys.

Twórcy

autor

Ostrowski K.

• MTA Engineering Ltd., ul. Poniatowskiego 14, 35-026 Rzeszów

autor

Kozłowski A.

• Rzeszow University of Technology, ul. Poznańska 2

Bibliografia

• [1] K. Ostrowski, "Experience in structures designing according to European standards," Jurnal of Civil Engineering, Environment and Architecture, vol. 58, no. 3/I, pp. 203–214, 2011.
• [2] K. Weynand, J. P. Jaspart, and M. Steenhuis, "Economy studies of steel building frames with semirigid joints," Journal of Constructional Steel Research, vol. 46, no. 1, p. 85, 1998/04/01 1998.
• [3] U. Kuhlmann and A. Fürch, "Rotation capacity of steel joints (second draft)," in COST C1 - Working Group Meeting, Helsinki, 1997.
• [4] U. Kuhlmann and A. Fürch, "Rotation capacity of steel joints," in COST Project C1 - Working Group Meeting, Clermont-Ferrand, 1996
• [5] M. E. Lemonis and C. J. Gantes, "Incremental modeling of T-stub connections," Journal of Mechanics of Materials and Structures, vol. 1, no. 7, pp. 1135-1159, 2006. Journal of Mechanics of Materials and Structures.
• [6] L. Massimo, R. Gianvittorio, S. Aldina, and S. da Silva Luis, "Experimental analysis and mechanical modeling of T-stubs with four bolts per row," Journal of Constructional Steel Research, vol. 101, pp. 158-174, 2014.
• [7] A. M. Girão Coelho, F. S. K. Bijlaard, and L. Simões da Silva, "Experimental assessment of the ductility of extended end plate connections," Engineering Structures, vol. 26, pp. 1185-1206, 2004.
• [8] Y. Shi, G. Shi, and Y. Wang, "Experimental and theoretical analysis of the moment- rotation behaviour of stiffened extended end-plate connections," Journal of Constructional Steel Research, vol. 63, no. 9, pp. 1279-1293, 9// 2007.
• [9] G. L. Kulak, J. W. Fisher, and J. H. Struik, "Guide to Design Criteria for Bolted and Riveted Joints Second Edition," 2001.
• [10] H. Agerskov, "Analysis of bolted connections subject to prying," Journal of the Structural Division, pp. 2145-2163, November January 1977.
• [11] V. Piluso, C. Faella, and G. Rizzano, "Ultimate behavior of bolted T-stubs. I: Theoretical model," Journal of Structural Engineering, vol. 127, no. 6, pp. 686-693, 2001.
• [12] V. Piluso, C. Faella, and G. Rizzano, "Structural Semi-Rigid Connections: Theory, Design and Software," ed: Boca Raton (USA): CRC Press, 2000
• [13] A. M. Girão Coelho and L. Simões da Silva, "Numerical evaluation of the ductility of a bolted T-stub connection," in Advances in Steel Structures (ICASS '02)Oxford: Elsevier, 2002, pp. 277-284.
• [14] A. Girão Coelho, "Rotation capacity of partial strength steel joints with three-dimensional finite element approach," Computers and Structures, vol. 116, pp. 88-97, 2013.
• [15] K. Ostrowski and A. Kozłowski, "FEM based assessment of the rotation capacity of bolted joints," in Recent Progress in Steel and Composite Structures: Proceedings of the XIII International Conference on Metal Structures (ICMS2016, Zielona Góra, Poland, 15-17 June 2016), 2016, p. 479: CRC Press.
• [16] K. Ostrowski and A. Kozłowski, "The influence of end-plate joints stiffening on the rotation capacity," ce/papers, vol. 1, no. 2-3, pp. 381-388, 2017. ce/papers.
• [17] K. Ostrowski, "Finite element analysis of the rotation capacity of beam-to-column end-plate bolted joints," ed: Eurosteel, 2014.
• [18] J.-P. Jaspart, "Etude de la semi-rigidité des noeuds poutre-colonne et son influence sur la résistance et la stabilité des ossatures en acier," Université de Liège, Belgique, 1991.
• [19] P. Zoetemeijer, "A Design Method for the Tension Side of Statically Loaded, Bolted Beam-to-Column Connections," (in en), 1974.
• [20] B. Yoke, L. Yee, and R. E. Melchers, "Moment-rotation curves for bolted connections," Journal of Structural Engineering, vol. 112, pp. 615-635, 1986.
• [21] DD ENV 1993-1-1:1992, Eurocode 3: Design of steel structures - Part 1.1: General rules and rules for buildings, 1992.
• [22] EN 1993-1-8:2005 (E), Eurocode 3: Design of steel structures - Part 1-8: Design of joints, 2005.
• [23] K. Ostrowski and A. Kozłowski, "Hierarchical validation of FEM models," in XIV International Scientific Conference Rzeszów-Lwow-Koszyce. Rzeszów, 2015.
• [24] L. E. Schwer, "Verification and validation in computational solid mechanics and the ASME Standards Committee," WIT Transactions on the Built Environment, vol. 84, 2005.
• [25] F. Wald, L. Gödrich, M. Kurejková, L. Šabatka, J. Kabeláč, and D. Kojala, "Validation and verification in design of structural steel connections," ce/papers, vol. 1, no. 2-3, pp. 143-152, 2017.
• [26] K. Ostrowski and A. Kozłowski, "Experimental study of the portal frame for the validation of FEM model of beam to column joint (in Polish)" Czasopismo Inżynierii Lądowej, Środowiska i Architektury - Journal of Civil Engineering, Environment and Architecture, JCEEA. T. XXXIV, Z. 64 (3/I/17), pp. 437-446, 2017, DOI:10.7862/rb.2017.136.
• [27] A. Mijar and J. Arora, "An augmented Lagrangian optimization method for contact analysis problems, 1: formulation and algorithm," Structural and Multidisciplinary Optimization, vol. 28, no. 2-3, pp. 99-112, 2004.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).