Induction Machine: Comparison of Motor and Generator Characteristics

• Autorzy: Hadžiselimović M. , Zagradišnik I. , Štumberger B.

Warianty tytułu

PL

Maszyna indukcyjna – porównanie charakterystyk w trybie generatora i silnika

• Języki publikacji: EN

Abstrakty

EN

The aim of this paper is to present the difference of induction machine electromechanical characteristics in motor and generator operating modes. Firstly, the paper presents analytically derived equations, which are based on equivalent circuit and are used for calculation of induction machine breakdown torque. Secondly, a comparison of calculated and measured characteristics in motor and generator operating modes is presented. Results of torque characteristics measurements, temperature rise tests and load tests are also provided. Finally the difference between the calculated and the measured results is commented on and explained in detail.

PL

Celem artykułu jest zaprezentowanie różnicy charakterystyk elektromechanicznych maszyny indukcyjnej pracującej w trybie silnika i generatora. W oparciu o model matematyczny i wyniki badań przedstawiono charakterystyki – momentu, temperatury i obciążenia.

Słowa kluczowe

EN

induction machine; motor; generator; analytical calculation; measurements

PL

maszyna indukcyjna; silnik; generator

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2013
• Tom: R. 89, nr 2b
• Strony: 103--106
• Opis fizyczny: Bibliogr. 8 poz., rys., tab., wykr.

Twórcy

autor

Hadžiselimović M.

• University of Maribor, Faculty of Energy Technology
• University of Maribor, Faculty of Electrical Engineering and Computer Science

autor

Zagradišnik I.

• University of Maribor, Faculty of Electrical Engineering and Computer Science

autor

Štumberger B.

• University of Maribor, Faculty of Energy Technology
• University of Maribor, Faculty of Electrical Engineering and Computer Science

Bibliografia

• [1] V.V. Prus, M.V. Zagirnyak, I.A. Kolotylo, D. Miljavec, Estimate and taking into account change of steel losses in induction motors in process of their aging, Proceedings of International IEEE Conference EUROCON 2009, Saint Petersburg, 2009, pp 790-795
• [2] V. Prus, A. Nikitina, M. Zagirnyak, D. Miljavec, Research of rnergy processes in circuits containing iron in saturation condition. Przeglad Elektrotechniczny, 2011, Vol. 87, Issue 3, pp 149-152
• [3] P. Virtič, Variations of Permanent Magnets Dimensions in Axial Flux Permanent Magnet Synchronous Machine, Przeglad Elektrotechniczny, 2011, Vol. 87, Issue 12b, pp 194-197
• [4] P. Virtič, J. Avsec, Analysis of coreless stator axial flux permanent magnet synchronous generator characteristics by using equivalent circuit, Przeglad Elektrotechniczny, 2011, Vol. 87, Issue 3, pp 208-211
• [5] Kent R. D., “Analytic Analysis of Single- and Three-Phase Induction Motors”, IEEE Transactions on Magnetics, 1998, Vol. 34, No. 5, pp 3721-3727
• [6] M. Mlakar, M. Hadžiselimović, B. Štumberger, I. Zagradišnik, Determination of equivalent circuit parameters for three-phase induction motors: procedure in accordance with the iec 60034- 28 standard, Journal of Energy Technology, May 2011, Vol. 4, Issue 2, pp. 31-46
• [7] M. Zagirnyak, D. Mamchur, A. Kalinov: The theory and application of the induction motor diagnostic methods based on electrical signal analysis, Journal of Energy Technology, May 2012, Vol. 5, Issue 2, pp. 37-50
• [8] Zagradišnik I., Hadžiselimović M., Ritonja J., Slemnik B., “The emLook software package for the analytical and numerical analyses of electrical machines”, Prz. Elektrotech., 2010, Vol. 85, Issue 12, pp 175-178