The Design of Cast Technological Equipment for Heat Treatment Furnaces

• Autorzy: Drotlew A. , Piekarski B. , Słowik J.

Identyfikatory

DOI

10.1515/afe-2017-0086

• Języki publikacji: EN

Abstrakty

EN

Various examples of the design of cast elements of the equipment used in furnaces for the heat treatment of machine parts are given. Shortcomings in their performance are indicated. Reasons for required stability of equipment are briefly discussed. Elements of equipment illustrate the possibilities of using a charge-carrying pallet with dimensions of 900×600×45 mm as a basis for multi-component technological equipment. Introducing additional elements, such as metal baskets, intermediate pallets or crossbars to the main pallet, it becomes possible to create different configurations of this equipment. The technological equipment presented and discussed here is offered to different plants which heat-treat a wide variety of produced parts. It was found that the reliability and durability of new designed equipment can be checked only during practical use. For large plants dealing with the heat treatment of bulk quantities of parts homogeneous or similar in shape is recommended to use the dedicated tooling.

Słowa kluczowe

EN

innovative foundry materials; innovative foundry technologies; heat treatment plant; heat treatment furnaces

PL

materiały innowacyjne; innowacyjne technologie odlewnicze; piec do obróbki cieplnej; urządzenia do obróbki cieplnej

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2017
• Tom: Vol. 17, iss. 3
• Strony: 31--36
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Drotlew A.

• West Pomeranian University of Technology, Szczecin, Al. Piastów 17, 70-310 Szczecin, Poland

autor

Piekarski B.

• West Pomeranian University of Technology, Szczecin, Al. Piastów 17, 70-310 Szczecin, Poland

autor

Słowik J.

• West Pomeranian University of Technology, Szczecin, Al. Piastów 17, 70-310 Szczecin, Poland

Bibliografia

• [1] A. Bajwoluk & P. Gutowski (2015); The Effect of Pallet Component Geometry on Temperature Gradient During Cooling; Archives of Foundry Engineering, 1/2015 5-8.
• [2] Bajwoluk A. & Gutowski P.; (2016); Thermal stresses in the wall connections of cast grate structures. Archives of Foundry Engineering, 4/2016 11-16.
• [3] Dossett J.L., Boy er H.E. (2006). Practical Heat Treating. ASM International, 2nd ed.
• [4] Davis, J.R. (Ed.). (1997). Industrial Applications of Heat-Resistant Materials. In Heat Resistant Materials (67-85). ASM International.
• [5] G. Y. Lai: Heat-Resistant Materials for Furnace Parts, Trays, and Fixtures. ASM Handbook, 4 (1991) 510-518.
• [6] Heat Resistant Materials, Edited by JR Davis Davis & Associates, ASM Speciality Handbook, ASM International 1997.
• [7] Steinkusch W.: Hitzebeständiger Stahlguß für Wärmebehandlungsanlagen. Gas Wärme Inter., No. 6 (1987) 340-346.
• [8] Steinkusch W.: Verbesserte Werkstoff und Konstruktionen verringern Betriebskosten bei der Wärmebehandlung. Fachberichte Hütten. Metall., 1985, nr 9, s. 746.
• [9] Lai, G.Y. (2007). High-Temperature Corrosion and Materials Applications. ASM International.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)