Supervisory system of integrated spray booths

• Autorzy: Jaszczak S. , Nikończuk P.
• Języki publikacji: EN

Abstrakty

EN

Authors present a real time supervisory system for two cooperating spray booths, which are elements of the production line. The supervisory system enables a constant observation of such physical parameters like: temperature, pressure, air flow, concentration of styrene etc. The system also warns workers inside spray booths about dangerous events like a critical level of styrene, too low overpressure, the air flow is not high enough, etc. The paper presents results of the hardware and software development.

Słowa kluczowe

EN

spray booth; supervisory control system; safety

• Wydawca: Wydawnictwo PAK
• Czasopismo: Measurement Automation Monitoring
• Rocznik: 2017
• Tom: Vol. 63, No. 6
• Strony: 217--219
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Jaszczak S.

• West Pomeranian University of Technology In Szczecin, Department Of Computer Science, 49 Żołnierska St., PL-71210 Szczecin, Poland

autor

Nikończuk P.

• West Pomeranian University of Technology In Szczecin, Department Of Maritime Technology And Transport, 41 Piastów Ave., PL-71065 Szczecin, Poland

Bibliografia

• [1] Alt S., Sawodny O.: Model-based Temperature and Humidity Control of Paint Booth HVAC Systems. Mechatronics (ICM), 2015 IEEE International Conference, 160-165 DOI:10.1109/ ICMECH. 2015. 7083966.
• [2] Datasheet X20AI4632-1 Bernecker&Rainer
• [3] Datasheet X20AT4222 Bernecker&Rainer
• [4] Jaszczak S., Nikończuk P.: Synthesis of spray booth control software in programmable controller. Przegląd Elektrotechniczny, ISSN 0033-2097, R. 91, NR 11/2015:182-185.
• [5] Jaszczak S., Nikończuk P.: Temperature control algorithms for the refinishing spray booth. Measurement Automation and Monitoring (Pomiary Automatyka Kontrola) 7/2015: 358-360
• [6] Jaszczak S., Nikończuk P., A model of the refinishing spray booth as a plant of automatic control, Measurement Automation and Monitoring (Pomiary Automatyka Kontrola) 7/2015, pp. 361-363.
• [7] Nikończuk P.: Study of Heat Recovery in Spray Booths. Metal Finishing, Vol. 111 (6), 37:39.
• [8] Nikończuk P.: Preliminary analysis of heat recovery efficiency decrease in paint spray booths. Transactions of the Institute of Metal Finishing, 2014 Vol. 92 No 5, 235:237.
• [9] X20 System User´s Manual Bernecker&Rainer.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).