Optimization of the structural components of gearwheels of cylindrical reducing gears

• Autorzy: Vasyljeva O. , Kuzio I.
• Języki publikacji: EN

Abstrakty

EN

For the first time the design equations for determining the structural components of cylindrical tooth gears of reduction units are improved allowing for the use of informational technologies (IT). On the basis of the equations obtained the optimizing mathematical model of the optimal synthesis of structural components of tooth gearwheels has been developed. For solving the optimizing model the Monte-Carlo method is applied. The structural parameters (quantities), obtained by the developed optimizing mathematical model, have optimal values with probability up to 0.95 under the conditions of necessary strength and production safety. The implementation of the optimization process is recommended at the design institutions for the design of the cylindrical reduction drives for different objects of mechanical engineering and into the educational process of higher technical educational institutions while studying theoretical matters, accompanied by the use of IT.

Słowa kluczowe

EN

optimization; structural components of a tooth gearwheel; optimizing model; tooth gearwheel strength; gearwheel reliability

• Wydawca: Polish Academy of Sciences, Branch in Lublin
• Czasopismo: ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
• Rocznik: 2014
• Tom: Vol. 3, No 1
• Strony: 127--132
• Opis fizyczny: Bibliogr. 21 poz., rys., wykr., wz.

Twórcy

autor

Vasyljeva O.

• Department of exploitation of transport vehicles and fire-rescue technique, Lviv state University of Life Safety

autor

Kuzio I.

• Department of Mechanics and Mechanical Engineering Automation, Lviv Polytechnic National University,79007 Lviv, Kleparivska str., 35

Bibliografia

• 1. Nechepaev V.G. 2011. Development of and introduction of innovative model of general engineering preparation of specialists for the mountain metallurgical complex of the Donetsk of region / Engineering of Science/ Materials of 13th regional scientifically - methodical conference. it is of Donetsk : DonNTU, 6-10. (Ukraine)
• 2. Kirichenko А.F. and Berejnoy V.А. 2004. Prospects of improvement of work of evolventen transmissions. «Collection of the National technical university "Kharkivs polytechnic institute"». - Kharkiv: NTU "KPI". - Prod. 31, 82-88. (Ukraine)
• 3. Shishov V.P., and Tkach P.N., and Revjakina О. А. and Muhovaty А.А. 2002. Synthesis of the cylindrical gearings with high loading ability. «Collection of the East Ukrainian National university the name of V. Dals», №10(56), Luhansk: ENU the name of. В. of V. Dals, 247 254. (Ukraine)
• 4. Shishov V.P. and Tkach P.N. 2003. Differential equalizations for the synthesis of gearings with the biconvexconcave points «Lifting-transport technique», №4,25-32. (Ukraine)
• 5. Hulida E.M., and Dsjuba L.F. and Olkhovyji I.M. 2007. Applied mechanics. – Lviv: Svit. – 284. (Ukraine)
• 6. Hulida E.M. 1983. Management reliability of cylindrical gear-wheels. it is. – Lvіv: Higher school. – 136. (Ukraine)
• 7. Anurjev V.I. 1980. Reference book of machine designerbuilder: In 3 т. of Т. 3. it is a 5th publ., proces. and addit. − М.: Engineer. − 557. (Russia)
• 8. Push V.E., Beljaev V.H., Havrjushyn A.A. 1985. Metalcutting machine tools. - М.: Engineer. - 256. (Russia)
• 9. Hulida E.M. 1977. Technology of finishings operations of treatment of teeth of cylindrical wheels. – Lviv: Vyshcha shkola, 168. (Ukraine)
• 10. Kirichenko А.F. and Berejnoy V.А. 2004. Adjusting of inflexibility of evolventy of direct teeth transmissions. Collection of the National technical university "Kharkivs polytechnic institute". - Kharkiv: NTU "KhPI". - Prod. 28, 142-149. (Ukraine)
• 11. Kirichenko А.F. and Berejnoy V.А. 2005. Influence of modification as проточки along the top of tooth on his flexural inflexibility. Collection of the National technical university "Kharkivs polytechnic institute". - Kharkiv: NTU "KPI". - Prod. 40, 131-134. (Ukraine)
• 12. Shishov V.P. and Tkach P.N. and Pymchenko A.V. 2002. Generalization of geometry of teeth of cylindrical wheels, cut a lath instrument. Collection of the East Ukrainian National university the name of V. Dals, №7(53). – Luhansk: ENU the name of. В. of V. Dals, 117-122. (Ukraine)
• 13. Shishov V.P. and Tkach P.N. 2004. A choice of national parameters of transmissions is with two protuberant and outbowed teeth. Engineering science, № 2, 25-32. (Ukraine)
• 14. Pavlyshe V.T. 2003. Bases of constructing and calculation of details of machines. it is. Lvov: Playbill, 560. (Ukraine)
• 15. Pukach P. and Kuzio I. and Nytrebych Z. 2013. Influence of some speed parameters on dynamics of nonlinear flexural vibrations of a drill column. Econtechmod an international quarterly journal. Vol. 2, № 4, 61-66. (Poland)
• 16. Hulida E.M. 1980. Technological government bases reliability of cylindrical gear-wheels. Announcer of the Lvov polytechnic institute, № 146, 30-33. (Ukraine)
• 17. Shishov V.P. and Tkach P.N. and Skljar J.A. 2009. Geometrical kinematics criterion for the synthesis of the highly loaded cylindrical direct teeth transmissions. Lifting- transport technique, № 3 (31), 109-114. (Ukraine)
• 18. Kuzio I. V. and Vasyljeva O.E. 1999.
• 19. Influence of construction factors is on durability of gearings. Engineering science, № 6, 50-53. (Ukraine)
• 20. Kuzio I. V. and Vasyljeva O.E. 2000. Influence of dynamic overloads of gearings is on their durability. Announcer. Optimization of production processes and technical control is in an engineer and instrument-making, № 394, 75-80. (Ukraine)
• 21. Shishov V.P. and Tkach P.N. and Revjakina O.A. and Skljar J.A. 2009. About tensions of bend at foundation of зубьев with the generalized initial contour. Vesnik of national technical university of «KhPI», № 19, 160-166.(Ukraine)