PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The Numerical Model of 2G YBCO Superconducting Tape in the Windings of the Transformer

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Computer assisted calculations consists in applying software for the simu-lation of models of certain devices and later analysing their behavior under given conditions corresponding to real working conditions in a specific environment.The paper proposes a circuit model of 2G YBCO super-conducting tape created in the PSpice program. The model consists of passive blocks and active user blocks of analogue behavioural modelling (ABM). ABM blocks calculate the conductances, the currents of the indi-vidual layers of the superconducting tape, its thermal capacity, the heating power, the cooling power and resulting temperature of the tape. The model uses table of thermal power density passed to the liquid nitrogen vs. temperature. Smooth transition of the YBCO superconductor layer into the resistive state is described by Rhyner’s power law. The developed model was used for generating waveforms of thermal and electrical quantities.
Rocznik
Strony
23--38
Opis fizyczny
Bibliogr. 12 poz., fig., tab.
Twórcy
autor
  • Lublin University of Technology, Institute of Electrical Engineering & Electrotechnologies, Nadbystrzycka 38A, 20-618 Lublin
autor
  • Lublin University of Technology, Institute of Electrical Engineering & Electrotechnologies, Nadbystrzycka 38A, 20-618 Lublin
  • Lublin University of Technology, Institute of Electrical Engineering & Electrotechnologies, Nadbystrzycka 38A, 20-618 Lublin
Bibliografia
  • [1] American Superconductor. (n.d). Retrieved December 2, 2016, from AMSC website, http://www.amsc.com/solutions-products/YBCO_wire.html
  • [2] Czerwinski, D., Jaroszynski, L., Janowski, T., Majka, M., & Kozak, J. (2014). Analysis of Alternating Overcurrent Response of 2G HTS Tape for SFCL. IEEE Transactions on Applied Superconductivity, 24, 3. doi:10.1109/TASC.2013.2281494
  • [3] Czerwinski, D., Jaroszynski, L., Majka, M., Kozak, J., & Charmas, B. (2016). Comparison of Over-current Responses of 2G HTS Tapes. IEEE Transactions on Applied Superconductivity, 26, 3. doi:10.1109/TASC.2016.2520080
  • [4] Janowski, T., Wojtasiewicz, G., & Jaroszynski, L. (2016). Short-circuit current limitation by super-conducting transformer. 13th Selected Issues of Electrical Engineering and Electronics (WZEE). doi:10.1109/WZEE.2016.7800231
  • [5] Jaroszynski, L, & Janowski, T. (2014). YBCO coated conductors for superconducting transformer windings. Przegląd Elektrotechniczny, 90, 1/2014, 164–166. doi: 10.12915/pe.2014.01.39
  • [6] Lu, J., Choi, E. S., & Zhou, H. D. (2008). Physical properties of Hastelloy C-276TM at cryogenic temperatures. Journal of Applied Physics, 103, 064908. doi: 10.1063/1.2899058
  • [7] Majka, M., & Kozak, S. (2009), Zastosowanie taśm I i II generacji do budowy nadprzewodnikowych ograniczników prądu, Przegląd Elektrotechniczny, 87, 5/2009, 183–185.
  • [8] Matula, R. A. (1979). Electrical resistivity of cooper, gold, palladium and silver. Journal of Physical and Chemical Reference Data, 8, 4, 1147-1298. doi:10.1063/1.555614
  • [9] Parida, B. (2012). DC electric al resistivity studies in bulk YBCO/Ag composites. A report submitted to Department of Physics National Institute of Technology, Rourkela.
  • [10] Smith, D. R., & Fickett, F. R. (1995). Low-Temperature Properties of Silver. Journal of Research of the National Institute of Standards and Technology, 100, 2, 119–171.
  • [11] SuperPower Inc. (n.d.). Retrieved December 2, 2016, from SuperPower Inc. website, http://www.superpower-inc.com/content/2g-hts-wire
  • [12] Tinkham, M. (2004). Introduction to Superconductivity (2nd ed.). Dover Books on Physics.
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-0d31beea-a7b8-4492-aebc-d85b0b1ed230
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.