Thermal analysis of matrix composite reinforced with Al2O3 particles

• Autorzy: Włodarczyk-Fligier A. , Polok-Rubiniec M. , Konieczny J.

Identyfikatory

DOI

10.5604/01.3001.0014.1957

• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of this paper is to present a modern manufacturing method of production and compare the thermal, mechanical, properties of composite materials with aluminium alloy matrix reinforced by Al2O3 particles. Design/methodology/approach: The material for investigation was manufactured by the method of powder metallurgy (consolidation, pressing, hot concurrent extrusion of powder mixtures of aluminium EN AW-AlCu4Mg1 (A) and ceramic particles Al2O3). The amount of the added powder was in the range of 5 mass.%, 10 mass.% and 15 mass.%. Findings: The received results concerning the enhancement of hardness, which show the possibility of obtaining the MMC composite materials with required microstructure, influencing the properties of the new elaborated composite materials components. Concerning the thermal properties, especially the linear thermal expansion coefficient was measured, as well as the dilatometric change of the sample length was analysed. Practical implications: Concerning practical implications it can be stated that the tested composite materials can be applied among others in the transportation industry, but it requires additional research. Originality/value: The received results show the possibility of obtaining new composite materials with controlled and required microstructure with possible practical implications.

Słowa kluczowe

EN

matrix composites; differential scanning calorimetry; DSC; plastometric tests; abrasion resistance

PL

materiały metaliczne; skaningowa kalorymetria różnicowa; badania plastometryczne; odporność na ścieranie

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2020
• Tom: Vol. 100, nr 1
• Strony: 5--11
• Opis fizyczny: Bibliogr. 19 poz., tab., wykr.

Twórcy

autor

Włodarczyk-Fligier A.

• Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Polok-Rubiniec M.

• Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Konieczny J.

• Department of Railway Transport, Faculty of Transport and Aviation Engineering, Silesian University of Technology, ul. Krasińskiego 8, 40-019 Katowice, Poland

Bibliografia

• [1] A. Evans, S.C. Marchi, A. Mortensen, Metal Matrix Composites, in: Metal Matrix Composites in Industry, Springer, Boston, MA, 2003, 9-38. DOI: https://doi.org/10.1007/978-1-4615-0405-4_2
• [2] J. Hashim, M. Looney, S.J. Hashmi, Particle distribution in cast metal matrix composites - Part I, Journal of Materials Processing Technology 123/2 (2002) 251-257. DOI: https://doi.org/10.1016/S0924-0136(02)00098-5
• [3] A. Jimenez-Morales, E.M. Ruiz-Navas, J.B. Fogagnolo, J.M. Torralba, Corrosion resistance of 6061 aluminum base composite materials, Proceedings of the International Conference on Advances in Materials and Processing Technologies “AMPT 2003”, Dublin, 2003, 1267-1270.
• [4] A.K. Sharma, R. Bhandari, A. Aherwar, R. Rimasauskiene, Matrix materials used in composites: A comprehensive study, Materialstoday: Proceedings 21/3 (2020) 1559-1562. DOI: https://doi.org/10.1016/j.matpr.2019.11.086
• [5] A. Mortensen, J. Llorca, Metal Matrix Composites, Annual Review of Materials Research 40 (2010) 243270. DOI: https://doi.org/10.1146/annurev-matsci-070909-104511
• [6] M. Rosso, Ceramic and metal matrix composites: Routes and properties, Journal of Materials Processing Technology 175/1-3 (2006) 364-375. DOI: https://doi.org/10.1016/j.jmatprotec.2005.04.038
• [7] A. Włodarczyk-Fligier, M. Adamiak, L.A. Dobrzański, Composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the BN ceramic particles, Archives of Materials Science and Engineering 42/1 (2010) 29-36.
• [8] J.M. Torralba, C.E. Costa, F. Velasco, P/M aluminum matrix composites: an overview, Journal of Materials Processing Technology 133/1-2 (2003) 203-206. DOI: https://doi.org/10.1016/S0924-0136(02)00234-0
• [9] R. Casati, M. Vedani, Metal Matrix Composites Reinforced by Nano-Particles - A Review, Metals 4/1 (2014) 65-83. DOI: https://doi.org/10.3390/met4010065
• [10] R. Everett (ed.), Metal matrix composites: Processing and Interfaces, Academic Press, 2012.
• [11] L.A. Dobrzański, A. Włodarczyk, M. Adamiak, Structure and properties of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the BN or Al2O3 ceramics particles, Journal of Materials Processing Technology 175/1-3 (2006) 186-191. DOI: https://doi.org/10.1016/j.jmatprotec.2005.04.031
• [12] H. Morawiec, A. Kostka, J. Lelątko, M. Gigla, A. Janas, Structure of interface in Al-TiC composite, Composites 1 (2001) 228-232 (in Polish).
• [13] M. Rahimian, N. Parvin, N. Ehsani, The effect of production parameters on microstructure and wear resistance of powder metallurgy Al-Al2O3 composite, Materials and Design 32/2 (2011) 1031-1038. DOI: https://doi.org/10.1016/j.matdes.2010.07.016
• [14] J.L. Broutman, R.H. Krock, Composite Materials, Interfaces in Metal Matrix Composites, vol. 1, Elsevier, 2016.
• [15] J.W. Kaczmar, K. Pietrzak, W. Włosiński, The production and application of metal matrix composite materials, Journal of Materials Processing Technology 106/1-3 (2000) 58-67. DOI: https://doi.org/10.1016/S0924-0136(00)00639-7
• [16] S. Magibalan, P. Senthil kumar, P. Vignesh, M. Prabu, A.V. Balan, N. Shivasankaran, Aluminum Metal Matrix Composites – A Review, Transactions on Advancements in Science and Technology 1 (2017) 1-6.
• [17] PN-EN ISO 6507-1:2018-05, Metale - Pomiar twardości sposobem Vickersa - Część 1: Metoda badania, Polish Standard (in Polish).
• [18] L.A. Dobrzański, A. Włodarczyk, J. Konieczny, Structure of EN AW-Al Cu4Mg1(A) composite materials reinforced with the Ti(C,N) ceramic particles, Journal of Achievements in Materials and Manufacturing Engineering 51/1 (2012) 22-29.
• [19] A. Włodarczyk-Fligier, K. Labisz, M. Polok-Rubiniec, J. Konieczny, Application of anodisation process for cast aluminum surface properties enhancement, Archives of Metallurgy and Materials 61/3 (2016) 1351-1356. DOI: https://doi.org/10.1515/amm-2016-0222

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).