Influence of the casting temperature on dental Co-base alloys properties

• Autorzy: Reimann Ł. , Dobrzański L.A.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The goal of the study is to find the relationship between the value of casting temperature on corrosion resistance, hardness and mechanical properties of two Co-Cr-Mo alloys Remanium 2000+ and Wirobond LFC used in dentistry. Design/methodology/approach: Realized investigations starts from preparing the mould and cast two CoCrMo alloys in 1430, 1440, 1450 and 1460°C. Electrochemical corrosion research were made in water centre which simulated artificial saliva environment, by recording of anodic polarization curves with use the potentiodynamic methods. The compression strength, yield strength and unit shortening was evaluated during the static compression tests on multi-role testing machine MTS. Hardness test were obtained by use the microhardness FM ARS 9000 FUTURE TECH Vickers methods with load 1 kg. Findings: The manufacturing conditions for the Co-Cr-Mo alloys are one of the possible method which effects in increase or decrease of the safety factor in construction. Realized research of the increasing casting temperature about 10-20°C in regard to conditions offered by producer was found that hardness and corrosion resistance change only in small value, while corrosion current of samples casted from 1460°C increase by one order of magnitude to casting from 1430°C. Increase or decrease casting temperature results in decrease the mechanical properties yield strength and compression strength for both alloys. Practical implications: Scientific research of the cobalt alloys used on the dentures confirmed that casting temperature as one of the condition during the manufacturing influence on the most important useful properties like corrosion resistance, strength of the prosthetic constructions and machinability of the CoCrMo alloys. Originality/value: The paper presents an effect of correct selection the casting temperature, on the most important properties of CoCrMo alloys use in dental engineering.

Słowa kluczowe

EN

biomaterial; corrosion; Co-Cr-Mo alloy; prosthodontics; casting temperature

PL

biomateriał; korozja; stop Co-Cr-Mo; protetyka stomatologiczna; temperatura odlewania

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2013
• Tom: Vol. 60, nr 1
• Strony: 5--12
• Opis fizyczny: Bibliogr. 19 poz.

Twórcy

autor

Reimann Ł.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science. Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Dobrzański L.A.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science. Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] L.A. Dobrzański, Metallography of non ferrous metals alloys, The Silesian University of Technology Publishing, Gliwice, 2007 (in Polish).
• [2] L.A. Dobrzański, Ł. Reimann, Influence of Cr and Co on hardness and corrosion resistance CoCrMo alloys used on dentures, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 193-199.
• [3] S.F. Rosenstiel, M.F. Land, J. Fujimoto, Contemporary fixed prosthodontics, Czekaj Publisher, Lublin 2002 (in Polish).
• [4] D. Upadhyay, M.A. Panchal, R.S. Dubey, V.K. Srivastava, Corrosion of alloys used in dentistry, A review, Materials Science and Engineering A 432/1-2 (2006) 1-11.
• [5] W. Walke, Z. Paszenda, J. Tyrlik-Held, Corrosion resistance and chemical composition investigations of passive layer on the implants surface of Co-Cr-W-Ni alloy, Journal of Achievements in Materials and Manufacturing Engineering, 16/1-2 (2006) 74-79.
• [6] C. Manaranche, H. Hornberger, A proposal for the classification of dental alloys according to their resistance to corrosion, Dental Materials 23/11 (2007) 1428-1437.
• [7] R. Al-Hity, H. Kappert, S. Viennot, F. Dalard, B. Grosgogeat, Corrosion resistance measurements of dental alloys, are they correlated?, Dental Materials 23 (2007) 679-687.
• [8] R.G. Craig, JM. Powers, JC. Wataha, Dental materials, Urban and Partner Medical Publisher, Wrocław, 2000 (in Polish).
• [9] L.A. Dobrzański, Ł. Reimann, Digitization procedure of creating 3D model of dental bridgework reconstruction, Journal of Achievements in Materials and Manufacturing Engineering 55/2 (2012) 469-476.
• [10] I. Budak, B. Kosec, M. Sokovic, Application of contemporary engineering techniques and technologies in the field of dental prosthetics, Journal of Achievements in Materials and Manufacturing Engineering 54/2 (2012) 233-241.
• [11] O.L. Bezzon, H. Pedrazzi, O. Zaniquelli, T. da Silva, Effect of casting technique on surface roughness and consequent mass loss after polishing of NiCr and CoCr base metal alloys, A comparative study with titanium, The Journal of Prosthetic Dentistry 92/3 (2004) 274-277.
• [12] K.S. Jang, S.J. Youn, Y.S. Kim, Comparison of castability and surface roughness of commercially pure titanium and cobalt-chromium denture frameworks, The Journal of Prosthetic Dentistry 86 (2001) 93-98.
• [13] S. Viennot, M. Lissac, G. Malquarti, F. Dalard, B. Grosgogeat, Influence of casting procedures on the corrosion resistance of clinical dental alloys containing palladium, Acta Biomaterialia 2 (2006) 321-330.
• [14] Z. Komorek, S. Jóźwiak, M. Kuchta, The influence of production conditions on the strength of Co-Cr-Mo-C stomatology alloy, Archives of Foundry 18/6 (2006) 279-282 (in Polish).
• [15] B. Surowska, K. Beer, J. Borowicz, I. Veremchuk, The influence of casting technologies on quality of dental cobalt alloy, Advance in Science and Technique 11 (2011) 81-88 (in Polish).
• [16] A. Polak, Theoretical and practical indications in casting metals, Modern Dentistry Technican 2 (2005) 28-35 (in Polish).
• [17] L.A. Dobrzański, Ł. Reimann, C. Krawczyk, Effect of age hardening on corrosion resistance and hardness of CoCrMo alloys used in dental engineering, Archives of Materials Science and Engineering 57/1 (2012) 5-12.
• [18] Polish Standards PN-EN ISO 10271:2004, Dental metallic materials - Corrosion test methods.
• [19] B. Surowska, Metallic biomaterials and the metal-ceramic connections used in dentistry, Lublin University of Technology Publishing, Lublin, 2009.