Effect of different wire materials on WEDM performance of Bio-compatible material

• Autorzy: Pandey Gaurav Kumar , Patel Praveen Bhai , Kumar Abhishek , Niranjan Ramendra Singh , Katiyar Vikas , Chandra A. K

Identyfikatory

DOI

10.30657/pea.2022.28.06

• Języki publikacji: EN

Abstrakty

EN

The present experimental investigation aims to analyse the effect of various machining parameters, such as pulse peak current (Ion), pulse on time (Ton), pulse off time (Toff) and spark voltage (SV) on the surface roughness (SR) and material removal rate(MRR) by using continuous traveling of both wire electrode (i.e. brass wire and zinc-coated brass wire). The present work also analyses the effect of types of wires, such as brass wire and zinc-coated brass wire used during machining of Titanium alloy (Ti-6Al-4V) on Surface roughness (SR) and material removal rate (MRR). This work studies the correlation between various response parameter such SR and MRR by using same machining parameter by for both wires.

Słowa kluczowe

EN

WEDM; MRR; SR; Ti-6Al-4V

PL

WEDM; MRR; SR; Ti-6Al-4V

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2022
• Tom: Vol. 28, Iss. 1
• Strony: 50--55
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Pandey Gaurav Kumar

• AIT, Kanpur, U.P India

autor

Patel Praveen Bhai

• UIET, CSJMU, Kanpur, U.P India; [e-mail] (P.B.P.); [e-mail] (R.S.N.); [e-mail] (V.K.);[e-mail] (A.K.C.)

autor

Kumar Abhishek

• NIT Patna, Patna, Bihar, India

autor

Niranjan Ramendra Singh

autor

Katiyar Vikas

• UIET, CSJMU, Kanpur, U.P India; [e-mail] (P.B.P.); [e-mail] (R.S.N.); [e-mail] (V.K.);[e-mail] (A.K.C.)

autor

Chandra A. K

• 2 UIET, CSJMU, Kanpur, U.P India; [e-mail] (P.B.P.); [e-mail] (R.S.N.); [e-mail] (V.K.);[e-mail] (A.K.C.)

Bibliografia

• 1. Prasad, A.V.S., Koona, R., Datta, G.L., 2014. An Experimental Study of Wire EDM on Ti-6Al-4V Alloy. International Conference on Advances in Manufacturing and Materials Engineering, 5, DOI: 10.1016/j.mspro.2014.07.51710.1016/j.mspro.2014.07.517
• 2. Prasad, A.V.S., Koona, R., Verma, A., Kumar, P.J., Rao, S.K., 2019. Optimization Of Material Removal Rate. Surface Roughness in Wire-EDM By Using Desirability Function Analysis, International Journal of Innovative Technology and Exploring Engineering, 8(6), 20-24.
• 3. Kuriakose, S., Shunmugam, M.S., 2004. Characteristics Of Wire-Electro Discharge Machined Ti6Al4V Surface, Journal of Materials Letters, 58, 2231-2237, DOI: 10.1016/j.matlet.2004.01.03710.1016/j.matlet.2004.01.037
• 4. Nourbakhsh, F., Rajurkar, K.P., 2013. Wire Electro-Discharge Machining of Titanium Alloy. The First CIRP Conference on Biomanufacturing CIRP, 5, 13-18, DOI: 10.1016/j.procir.2013.01.00310.1016/j.procir.2013.01.003
• 5. Kuriachen, B., Paul, J., Mathew, J., 2012. Modelling Of Wire Electrical Discharge Machining Parameters Using Titanium Alloy (Ti-6Al-4V). International Journal of Emerging Technology and Advanced Engineering, 2(4), 377-381.
• 6. Alias, A., Abdullah, B., Mohd Abbas, N., 2012. Wedm: Influence of Machine Feed Rate in Machining Titanium Ti-6al-4v Using Brass Wire and Constant Current (4A), International Symposium on Robotics and Intelligent Sensor, 41, 1812-1817, DOI: 10.1016/j.proeng.2012.07.38810.1016/j.proeng.2012.07.388
• 7. Alias, A., Abdullah, B., Mohd Abbas, N., 2012. Influence of Machine Feed Rate in Machining Titanium Ti-6al-4v Using Brass Wire and Constant Current (6A), International Symposium on Robotics and Intelligent Sensor, 41, 1806-1811, DOI: 10.1016/j.proeng.2012.07.38710.1016/j.proeng.2012.07.387
• 8. Arikatla, S.P., Mannan, K.T., 2017. Parametric Optimization In Wire Electrical Discharge Machining Of Titanium Alloy Using Response Surface Methodology. Materials Today: Proceedings, 4(2), 1434-1441, DOI: 10.1016/j.matpr.2017.01.16510.1016/j.matpr.2017.01.165
• 9. Chavan, U.M., Karthikeyan, R., 2018. Experimental Investigation for Optimum Process Parameters on MRR And Surface Roughness of Titanium Alloy Grade 5 Using Wire Cut EDM Machine. International Journal for Research in Engineering Application and Management, 4 (7), 64-69, DOI: 10.18231/2454-9150.2018.0896
• 10. Danial, G., Davoudinejad, A., Mohammad Hassan, H., Navid, H., Golshan, A., 2013. Optimizing Finishing Process In Wedming Of Titanium Alloy (Ti-6Al-4V) By Brass Wire Based On Response Surface Methodology. Research Journal of Applied Sciences, Engineering And Technology 5(4), 1290-1301, DOI: 10.19026/RJASET.5.486410.19026/rjaset.5.4864
• 11. Kumar, Jatinder, 2012. Prediction of Surface Roughness in Wire Electric Discharge Machining (WEDM) Process Based on Response Surface Methodology. International Journal of Engineering And Technology, 2(4), 708-712.
• 12. Pandey, G.K., Yadav, S.K.S., 2020. Multi-Response optimization of Vibration Assisted Electrical Discharge Drilling Process using PCA based GRA approach. 22(4), 2901-2915, DOI: 10.1016/j.matpr.2020.03.42410.1016/j.matpr.2020.03.424
• 13. Pandey, G.K., Yadav, S.K.S., 2020. Multi-Objective optimization of Vibration Assisted Electrical Discharge Drilling Process using PCA based GRA method. 26(2), 2667-2672, DOI: 10.1016/j.matpr.2020.02.56110.1016/j.matpr.2020.02.561

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).