Modelling the behaviour of a contact layer between the workpiece and a locator

• Autorzy: Maciolka P. , Jedrzejewski J.
• Języki publikacji: EN

Abstrakty

EN

The assurance of high precision alignment of workpieces with low stiffness requires thorough knowledge about the phenomena taking place in the contact area under the influence of forces exerted by actuators. It is indispensable to utilise the model of a contact and deformations taking place in it. In order to solve the problem of contact, the contact geometry was modelled by means of a flat and rough surface model based on stereometric measurements, as well as by means of the finite element method (FEM). In a FEM method, a spherical structure of the surface layer was assumed and only one zone was taken into consideration, i.e. 0.4.Rt (maximum surface roughness). Zone structure allows easy changing of mechanical properties of material during the introduction of data defined by a strengthening curve in the plastic region. The possibility of expanding the model by consecutive zones allows taking into consideration the physical properties in complex analyses of the surface layer. This paper presents the problem of contact related to the alignment and fixing process, a model of contact deformations between a flat and a rough surface, as well as the algorithm for determining the model of a surface profile according to the bearing ratio curve.

Słowa kluczowe

EN

roughness; contact; model

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2008
• Tom: Vol. 8, No. 3
• Strony: 42--53
• Opis fizyczny: Bibliogr. 11 poz., tab., rys.

Twórcy

autor

Maciolka P.

• Wroclaw University of Technology, Institute of Production Engineering and Automation, Poland, 50-371 Wrocław, ul. Łukasiewicza 5

autor

Jedrzejewski J.

• Wroclaw University of Technology, Institute of Production Engineering and Automation, Poland, 50-371 Wrocław, ul. Łukasiewicza 5

Bibliografia

• [1] ABBOTT E.J., FIRESTONE F.A., Specifying surface quantity - a method based on accurate measurement and comparison, Mech. Eng. 55, 1933, 569-572.
• [2] CAI S., BHUSHAN B., A numerical three-dimensional contact model for rough, multilayered elastic/plastic solid surfaces. Wear 259, 2005, 1408-1423.
• [3] ETSION I., KOGUT L., Elastic-plastic contact analysis of a sphere and a rigid flat, J. Appl. Mech. ASME 69, 2002, 657-662.
• [4] HEBDA M., WACHAL.A., Tribologia, WNT, W-wa, 2005.
• [5] JACKSON R.L., GREEN I., A Finite Element Study of Elasto-Plastic Hemispherical Contact Against a Rigid Flat, Journal of Tribology ASME 127, 2005, 343-354.
• [6] JEDRZEJEWSKI J., MAKODONSKI Z., Sprężyste odkształcenia stykowe. Przegląd Mechaniczny 17-18, 1975, 557-560.
• [7] JEDRZEJEWSKI J., MAKODONSKI Z., Matematyczny opis mikronierówności rzeczywistych powierzchni, Zagadnienia Eksploatacji Maszyn, Zeszyt 1-2, 1987, 69-70.
• [8] NEDER Z., YARADI K., Contact Behaviour of the Original and Substituted Real Surfaces, International Journal of Machine Tools and Manufacture Elsevier 41, 2001, 1935-1939.
• [9] MAKODONSKI Z., Wpływ rodzaju nierówności na mikroudział nośny, Prace Naukowe Inst. Technol. Bud. Masz. PWr.,nr 9, seria Konferencje, nr 1, Wrocław, 1975.
• [10] MAKODONSKI Z., Matematyczny model styku i odkształceń dwóch rzeczywistych powierzchni płaskich. Praca Doktorska, Pwr, 1980.
• [11] STARZYŃSKI G., Warstwa wierzchnia i jej modelowanie, IPPT PAN, website: http://www.ndt - imbn.com