The effect of alloying method on the structure and properties of sintered stainless steel

• Autorzy: Dudek A. , Lisiecka B. , Ulewicz R.

Identyfikatory

DOI

10.1515/amm-2017-0042

• Języki publikacji: EN

Abstrakty

EN

Sintered duplex stainless steels (SDSSs) appear to be very interesting and promising materials that can be used in many industrial sectors. Ferrite improves material strength while austenite increases hardness and corrosion resistance. This study proposes a method to improve functional properties (e.g. hardness and wear resistance) by means of alloying the surface of the sintered duplex steel with Cr₃C₂ + 10% NiAl powder. The results of optical microscope metallography, SEM/EDX, XRD analysis and microhardness and wear resistance measurements are also presented. The surface alloying with Cr₃C₂ is a manufacturing method of surface layer hardening in sintered stainless steels and modification of surface layer properties such as hardness and coefficient of friction.

Słowa kluczowe

EN

sintered duplex stainless steel; chromium carbide

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 1
• Strony: 281--287
• Opis fizyczny: Bibliogr. 19 poz., rys., tab.

Twórcy

autor

Dudek A.

• Czestochowa University of Technology, Faculty of Processing Engineering and Materials Technology, Institute for Material Engineering, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland

autor

Lisiecka B.

• Czestochowa University of Technology, Faculty of Processing Engineering and Materials Technology, Institute for Material Engineering, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland

autor

Ulewicz R.

• Czestochowa University of Technology, Faculty of Management, Department of Production Engineering, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland

Bibliografia

• [1] E. Klar, P.K. Samal, Powder Metallurgy Stainless steels: Processing, Microstructures and Properties, 2007 ASM International, Materials Park, USA.
• [2] J.C. Lippold, D.J. Kotecki, Welding Metallurgy and Weldability of Stainless Steels, 2005 John Wiley & Sons.
• [3] L. Sheppard, The Powder Metallurgy Industry Worldwide 2007-2012, 2007 Materials technology Publications, UK.
• [4] M. M Asif, K.A. Shrikrishna, A. P. Sathiya, S. Goel, J. Manuf. Process. 18, 92-106 (2015). [5] L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso, JAMME 19 (1), 38-45 (2006).
• [6] A. Dudek, A. Wrońska, L. Adamczyk, J. Solid State Electrochem. 18 (11), 2973-2981 (2014).
• [7] A. Wrońska, A. Dudek, Arch. Civ. Mech. Eng. 14, 425-432 (2014).
• [8] M. Campos, A. Bautista, D. Caceres, J. Abenojar, J.M. Torralba, J. Eur. Ceram. Soc. 23 (15), 2813-2819 (2003).
• [9] F. Martin, C. Garcia, Y. Blanco, M.L. Rodriguez-Mendez, Mat. Sci. Eng. A-Struct. 642, 360-365 (2015).
• [10] Z. Brytan, L.A. Dobrzański, M. Actis Grande, M. Rosso, JAMME 37 (2), 387-396 (2009).
• [11] A. R. Annamalai, A. Upadhyaya, D.K. Agrawal, Can. Metall. Quart. 54 (2), 142-148 (2015).
• [12] H. Jazi (Ed.), Advanced Plasma Spray Applications, 2012 InTech.
• [13] L. Singh, V. Chawla, J.S. Grewal, J. Miner. Mater. Charact. Eng. 11 (3), 243-265 (2012).
• [14] P. Peetsalu, S. Zimakov, J. Pirso, V. Mikli, R. Tarbe, P. Kulu, Proc. Estonian Acad. Sci. Eng. 12 (4), 435-444 (2006).
• [15] H. Sarjas, P. Kulu, K. Juhani, M. Viljus, V. Matikainen, P. Vuoristo, P. Est. Acad. Sci. 65 (2), 101-106 (2016).
• [16] G. C. Ji, C. J. Li, Y. Y. Wang, W.Y. Li, Surf. Coat. Tech. 200, 6749-6757 (2006).
• [17] F. Martin, C. Garcia, Y. Blanco, M.L. Aparicio, Tribol. Int. 57, 76-85 (2013).
• [18] Z. Brytan, M. Bonek, L. A. Dobrzański, JAMME 40 (1), 70-78 (2010).
• [19] V. Muthupandi, P. Bala, S. K Srinivasan, S. Seshadri, V. Sundaresan, Mat. Sci. Eng. A-Struct. 358, 9-16 (2003).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).