Lattice rotation definition and predicted textures of tensile and compression deformation

• Autorzy: Wroński M. , Wierzbanowski K.

Identyfikatory

DOI

DOI: 10.1515/amm-2016-0250

• Języki publikacji: EN

Abstrakty

EN

The problem of ambiguity in the definition of lattice rotation, used in plastic deformation models, is examined in this work. The geometry of tensile and compression deformation is considered. Two approaches to lattice rotation are considered: the classical definition (called also 'mathematical analysis) and the definition based on orientation preservation of specified directions/planes in the sample coordinates system. Similar study was already done by the present authors for the geometry of rolling deformation. It was shown that application of two rotation definitions enables to explain the appearance of two types of f. c. c. rolling textures: brass type and copper type textures. In the case of axisymmetric deformation the application of both definitions of lattice rotation leads to similar textures, but with different spread of their principal components.

Słowa kluczowe

EN

axisymmetric deformation; texture; lattice rotation; deformation models

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 3
• Strony: 1529--1536
• Opis fizyczny: Bibliogr. 33 poz., rys., wzory

Twórcy

autor

Wroński M.

• AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Wierzbanowski K.

• AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, Al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] W. F. Hosford. Texture of Crystalline Solids 2,175-182 (1977).
• [2] R. A. Lebensohn, T. Leffers, Texture Microstruct. 31, 217-230 (1999).
• [3] T. Leffers, R. A. Lebensohn, Proc. of the 11th. Int. Conf. on Textures of Materials (ICOTOM-11), Z. Liang et al. eds.. International Academic Publ., pp. 307-314 (1996).
• [4] K. Wierzbanowski, M. Wronski, A. Baczmanski, B. Bacroix, P. Lipinski, A. Lodini, Arch. Metall. Mater. 56, 575-584 (2011).
• [5] W. Wen, S. M`Gull, S. Ahzi, Mater. Sci. Forum 702-703, 241-244 (2012).
• [6] W. Wen, S. M`Guil, S. Ahzi, J. J. Gracio, Int. J. Plasticity 46, 23-36 (2013).
• [7] M. Wronski, K. Wierzbanowski, T. Leffers, Mater. Sci Tech- Lond. 29, 129-133 (2013).
• [8] K. Wierzbanowski, M. Wroński, T. Leffers, Crit. Rev. Solid State 39, 391-422 (2014).
• [9] H. Hu, P. R. Sperry, P. A. Beck, J. Metals 4, 76 (1952).
• [10] F. Haessner, Z. Metallkde 54, 98 (1963).
• [11] R. E. Smallman, D. Green, Acta Metall. 12, 145-154(1964).
• [12] I. L. Dillamore, W. T. Roberts, Acta Metall. 12,281-293 (1964).
• [13] J. S. Kallend, G. J. Davies, Phil. Mag., 25, 471-490 (1972).
• [14] P. Van Houtte, Acta Metall. 26, 591-604 (1978).
• [15] B. Bacroix, J. J. Jonas, Texture Microstruct. 8/9, 267-311 (1988).
• [16] P. Van Houtte, Acta Metall., 26, 591-604 (1978).
• [17] T. Leffers, R. K. Ray, Prog. Mater. Sci. 54, 351-396 (2009).
• [18] K. Wierzbanowski, A. Baczmanski, P. Lipinski, A. Lodini, Arch. Metall. Mater. 52, 77-86 (2007).
• [19] S. Wronski, K. Wierzbanowski, B. Bacroix, M. Wróbel, E. Rauch, F. Montheillet, M. Wronski, Arch. Metall. Mater. 54, 89-102 (2009).
• [20] W. Gambin, Plasticity and Textures, Kluwer Academic Publishers (2001).
• [21] U. F. Kocks, C. N. Tome, H. R. Wenk, Texture and Anisotropy, Cambridge University Press, Cambridge (1998).
• [22] M. Berveiller, A. Zaoui, J. Mech. Phys. Solids 26, 325-344 (1979).
• [23] N. Inakazu, Y. Kaneno, H. Inoue, Mat. Sci. Forum 157-162, 715-720(1994).
• [24] K. Z. Troost, M. H. J. Slangen, E. Gerritsen, Mat. Sci. Foruni 157-162, 1299-1304(1994).
• [25] K. Feldmann et al., Proc. 6-th Int. Conf. on Textures of Materials. Ed. by S. Nagashiina, vol. 2, pp. 1192-1200, Tokyo, Japan (1981).
• [26] C. A. Bronkhorst, S. R Kalidindi, L. Anand, Polycrystalline plasticity and the evolution of crystallographic texture in fee metals, Phil. Trans. R. Soc. Lond. A, 341, 443-477 (1992).
• [27] H. Inoue. Y. Yoshida, N. Inakazu, Isothermal forging textures in Y-TiAl base alloys. Mat. Sci. Forum. 157-162, 721-726 (1994).
• [28] H. Schneider. P. Klimanek, Texture development in ferrous materials during deformation by pass rolling or compression. Mat. Sci. Forum 157-162, 2037-2042 (1994).
• [29] I. L. Dillamore, H. Katoh, K. Haslam. Texture 1. 151(1974).
• [30] A. Baczmanski, A. Tidu, P. Lipinski, M. Humbert, K. Wierzbanowski, Mater. Sci. Forum 524-525, 235-240 (2006).
• [31] A. Baczmanski, K. Wierzbanowski, J. Tarasiuk, M. Ceretti, A. Lodini, Rev. Metall-Paris 94, 1467-1474 (1997.)
• [32] A. Baczmanski, N. Hfaiedh, M. Francois, K. Wierzbanowski, Mat. Sci. Eng. A. 501, 153-165 (2009).
• [33] K. Wierzbanowski, M. Wronski, A. Baczmanski, P. Lipinski, B. Bacroix, A. Lodini, Mater. Sci. Forum 772, 97-101 (2014).

Uwagi

EN

This work was supported by the National Science Centre (NCN) on the basis of decision DEC-2013/11/B/ST3/03787