Efficient Performance and Lower Complexity of Error Control Schemes for WPAN Bluetooth Networks

• Autorzy: El-Bendary M. A. M. , El-Tokhy M. A. R.
• Języki publikacji: EN

Abstrakty

EN

This paper presents a new technique of reduction retransmission time by decreasing the discarded packets and combating the complexity through error control techniques. The work is based on Bluetooth, one of the most common Wireless Personal Area Network. Its early versions employ an expurgated Hamming code for error correction. In this paper, a new packet format using different error correction coding scheme and new formats for the EDR Bluetooth packets are presented. A study for the Packet Error Probability of classic and Enhanced Data Rate (EDR) packets is also presented to indicate the performance. The simulation experiments are performed over Additive White Gaussian Noise (AWGN) and Rayleigh flat-fading channels. The experimental results reveal that the proposed coding scheme for EDR packets enhances the power efficiency of the Bluetooth system and reduce the losses of EDR packets.

Słowa kluczowe

EN

Bluetooth; EDR; packet loss; power efficiency; Wireless Personal Area Network

• Wydawca: Instytut Łączności - Państwowy Instytut Badawczy
• Czasopismo: Journal of Telecommunications and Information Technology
• Rocznik: 2014
• Tom: nr 4
• Strony: 100--107
• Opis fizyczny: Bibliogr. 24 poz., rys.

Twórcy

autor

El-Bendary M. A. M.

• Faculty of Industrial Education, Helwan University, Helwan, Egypt

autor

El-Tokhy M. A. R.

• Faculty of Industrial Education, Helwan University, Helwan, Egypt

Bibliografia

• [1] M. A. M. Mohamed, A. Abou El-Azm, N. El-Fishwy, M. A. R. El-Tokhy, and F. E. Abd El-Samie, “Optimization of Bluetooth packet format for efficient performance”, Progr. Electromag. Res. M, vol. 1, pp. 101–110, 2008.
• [2] P. Johansson, R. Kapoor, M. Kazantzidis, and M. Gerla, “Bluetooth: An enabler for personal area networking”, IEEE Netw. Mag., vol. 15, no. 5, pp. 28–37, 2001.
• [3] “IEEE 802.11, the working group setting the standards for wireless LANS” [Online]. Available: http:// grouper.ieee.org/groups/802/11
• [4] W. Feng, A. Nallanathan, and H. K. Garg, “Introducing packet segmentation for IEEE 802.11b throughput enhancement in the presence of Bluetooth”, in Proc. 59th IEEE Vehicular Technol. Conf., VTC 2004-Spring, Milan, Italy, 2004, pp. 2252–2256.
• [5] S. Galli, D. Famolari, and T. Kodama, “Bluetooth: channel coding considerations”, in Proc. 59th IEEE Vehicular Technol. Conf., VTC 2004-Spring, Milan, Italy, 2004, vol. 5, pp. 2605–2609.
• [6] R. Razavi, M. Fleury, and M. Ghanbari, “Energy-efficient video streaming over Bluetooth using rateless coding”, Elec. Lett., vol. 44, no. 22, pp. 1309–1310, 2008.
• [7] A. Zanella, “A mathematical framework for the performance analysis of Bluetooth with enhanced data rate”, IEEE Trans. Commun., vol. 57, no. 8, pp. 2463–2473, 2009.
• [8] A. Zanella, “A complete mathematical framework for the performance analysis of Bluetooth in fading channel”, Dept. Information Engineering, University of Padova, Italy, Dec. 2007.
• [9] A. Zanella and M. Zorzi, “Throughput and energy efficiency of Bluetooth v2 + EDR in fading channel”, in Proc. IEEE Wirel. Commun. Netw. Conf. WCNC 2008, Las Vegas, NE, USA, 2008, pp. 1661–1666.
• [10] R. Razavi, M. Fleury, and M. Ghanbari, “Correct Bluetooth EDR FEC performance with SEC-DAEC decoding”, Elec. Let., vol. 43, no. 22, pp. 1209–1211, 2007.
• [11] L.-J. Chen, T. Sun, and Y.-C. Chen, “Improving Bluetooth throughput using FEC and interleaving”, in Proc. Int. Conf. Mob. Ad Hoc Sensor Netw., Hong Kong, 2006, pp. 726–736.
• [12] M. A. M. Mohamed et al., “Bluetooth performance improvement with existing convolutional codes over AWGN channel”, in Proc. 2nd Int. Conf. Elec. Engin. Design and Technol. ICEEDT’08, Hammamet, Tunisia, 2008.
• [13] N. Golmie, R. E. Van Dyck, and A. Soltanian, “Interference of Bluetooth and IEEE 802.11: Simulation modeling and performance evaluation”, in Proc. ACM Int. Worksh. Model., Anal. Simul. Wirel. Mob. Sys., Rome, Italy, 2001, pp. 11–18.
• [14] T. Y. Chui, F. Thaler, and W. G. Scanlon, “A novel channel modeling technique for performance analysis of Bluetooth baseband packets”, in Proc. IEEE Int. Conf. Commun. ICC 2002, New York, USA, 2002, pp. 308–312.
• [15] J. C. Haartsen and S. Zürbes, “Bluetooth Voice and Data Performance in 802.11 DS WLAN Environment”, Ericsson Rep., 1999.
• [16] M. Lentmaier and K. Sh. Zigangirov, “On generalized low-density parity-check codes based on Hamming component codes”, IEEE Commun. Lett., vol. 3, no. 8, pp. 248–250, 1999.
• [17] D. Haccounand and G. Begin, “High-rate punctured convolutional codes for Viterbi and sequential decoding”, IEEE Trans. Commun., vol. 37, no. 11, pp. 1113–1125, 1989.
• [18] M. Luby, M. Mitzenmacher, M. A. Shokrollahi, and D. A. Spielman, “Efficient erasure correcting codes”, IEEE Trans. Inf. Theory, vol. 47, no. 2, pp. 569–584, 2001.
• [19] M. Kaiser, W. Fong, and M. Sikora, “A comparison of decoding latency for block and convolutional codes”, in Proc. 10th Int. Symp. Commun. Theory Appl. ISCTA’09, Ambleside, UK, 2009.
• [20] J. Hagenauer and L. Papke, “Iterative decoding of binary block and convolutional codes”, IEEE Trans. Infor. Theory, vol. 42, no. 2, pp. 429–445, 1996.
• [21] I. Howitt, “WLAN and WPAN coexistence in UL band”, IEEE Trans. Veh. Technol., vol. 50, no. 4, pp. 1114–1124, 2001.
• [22] A. Conti, D. Dardari, G. Paolini, and O. Andrisano, “Bluetooth and IEEE 802.11b coexistence: analytical performance evaluation in fading channels”, IEEE Trans. Selec. Areas Commun., vol. 21, no. 2, pp. 259–269, 2003.
• [23] J. Mikulka and S. Hanus, “Bluetooth and IEEE 802.11b/g coexistence simulation”, Radioengin., vol. 17, no. 3, pp. 66–73, 2008.
• [24] M. C. Valenti, “On the throughput of Bluetooth data transmissions”, in Proc. IEEE Wirel. Commun. Netw. Conf., Orlando, FL, USA, 2002, pp. 119–123.