Analiza wpływu grafenu na właściwości kompozytów węglowo-epoksydowych

• Autorzy: Sałacińska A.

Identyfikatory

DOI

10.5604/05096669.1222765

Warianty tytułu

EN

Analysis of influence of graphene on the carbon fiber-epoxy resin composites

• Języki publikacji: PL

Abstrakty

PL

W artykule przedstawiono przegląd literatury dotyczącej zastosowania grafenu, jako nanonapełniacza w kompozytach polimerowych. Opisano sposoby pozyskiwania grafenu dla tych kompozytów, tj.: eksfoliacja mikromechaniczna, metoda CVD, metoda chemiczna. Przedstawiono opracowane dotychczas technologie wprowadzania grafenowego wypełniacza w osnowę polimerową, tj.: metoda rozpuszczalnikowa, metoda mieszania składników w stanie ciekłym, metoda polimeryzacji in situ. Uwzględniono wady i zalety zastosowanych technologii wprowadzania i sposobów wytwarzania grafenu. Przedstawiono wpływ na ostatecznie właściwości kompozytu takich czynników jak: sposób wytwarzania kompozytu, metoda wytwarzania grafenu; masowa zawartość grafenu w kompozycie, wielkość ziaren nanonapełniacza grafenowego. Szczegolną część poświęcono kompozytom węglowo-epoksydowym wzmocnionym grafenem, jako materiałom o dużym potencjale wykorzystania w przemyśle lotniczym. Opisano najczęściej wykorzystywane w kompozytach węglowo-epoksydowych formy grafenu oraz najnowsze doniesienia o możliwości wytwarzania i stosowania w tych kompozytach dużych struktur grafenowych.

EN

This paper presents a literature review on the application of graphene as a nanofiller in polimer composites. The ways of obtaining graphene for these composites, such as: micromechanical exfoliation, CVD method and chemical method were presented. The means of incorporation Graphene filler into the polymeric matrix such as: solution intercalation technique, melt intercalation and in situ polymerization were discussed. The advantages and disadvantages of applied technology and type of incorporation methods of graphene into polymer were taken into account. The influence on the final properties of the composite such factors as: a method of producing composite and graphene; mass contents of graphene in the composite and the particle size of graphene nanofiller was shown. A special section was devoted to graphene reinforced carbon fiber-epoxy resin composites as materials with high potential in the aerospace industry. The most often applied forms of graphene used in polymer composites were described and the latest news about the possibility of producing large structures of graphene and their applications in carbon-epoxy composites were presented.

Słowa kluczowe

PL

grafen; nanokompozyty; kompozyty węglowo-epoksydowe

EN

graphene; nanocomposites; carbon fiber-epoxy resin composites

• Wydawca: Wydawnictwa Naukowe Instytutu Lotnictwa
• Czasopismo: Prace Instytutu Lotnictwa
• Rocznik: 2016
• Tom: Nr 3 (244)
• Strony: 135--144
• Opis fizyczny: Bibliogr. 58 poz.

Twórcy

autor

Sałacińska A.

• Centrum Technologii Kompozytowych, Instytut Lotnictwa, Al. Krakowska 110/114, 02-256 Warszawa

Bibliografia

• [1] Glover, B. M., 2004, "History of development of commercial aircraft and 787 Dreamliner", Aviat. Eng., 592, 16-21.
• [2] Pora, J., 2003, "Advanced materials and technologies for A380 structure. Flight airworthiness support technology". Airbus Custom Serv., 32, 3-8.
• [3] Soutis, C., 2005, "Carbon fiber reinforced plastics in aircraft construction". Materials Science and Engineering: A, 412(1), 171-176.
• [4] Davis, D. C, Wilkerson, J. W., Zhu, J., Ayewah, D. O., 2010, "Improvements in mechanical properties of a carbon fiber epoxy composite using nanotube science and technology". Composite Structures, 92(11), 2653-2662.
• [5] Wiśniowski W., 2010, "Influence of mass changes of flying objects on their dynamic features", Journal of KONES, Vol. 17, pp. 591-598.
• [6] Wiśniowski W., 2011, „Sztywność i utrata sztywności konstrukcji lotniczych", Prace Instytutu Lotnictwa, 214, s. 15-23.
• [7] Liang, J., Wang, Y., Huang, Y, Ma, Y, Liu, Z., Cai, J., Chen, Y, 2009, "Electromagnetic interference shielding of graphene/epoxy composites". Carbon, 47(3), 922-925.
• [8] Rafiee, M. A., Rafiee, J., Wang, Z., Song, H., Yu, Z. Z., Koratkar, N., 2009, "Enhanced mechanical properties of nanocomposites at low graphene content", ACS Nano, 3(12), 3884- 3890.
• [9] Teng, C. C, Ma, C. C. M., Lu, C. H., Yang, S. Y, Lee, S. H., Hsiao, M. C, Lee, T. M., 2011, "Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites". Carbon, 49(15), 5107-5116.
• [10] Almuhammadi, K., Alfano, M., Yang, Y., & Lubineau, G., 2014, "Analysis of interlaminar fracture toughness and damage mechanisms in composite laminates reinforced with sprayed multi-walled carbon nanotubes". Materials & Design, 53, 921-927.
• [11] Baltopoulos, A., Polydorides, N., Pambaguian, L., Vavouliotis, A., Kostopoulos, V., 2015, "Exploiting carbon nanotube networks for damage assessment of fiber reinforced composites". Composites Part B: Engineering, 76,149-158.
• [12] Bekyarova, E., Thostenson, E. T, Yu, A., Kim, H., Gao, J., Tang, J., Haddon, R. C, 2007, "Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites", Langmuir, 23(7), 3970-3974.
• [13] Hong, E., Lee, K., Kim, Y, & Lim, D., 2013, "A Study of Mechanical Interfacial Properties of Carbon Nanotube on Carbon Fiber/Epoxy Resin Composites", Journal of the Korean Institute of Surface Engineering, 46(5), 223-228.
• [14] Kablov, E. N., Kondrashov, S. V., Yurkov, G. Y, 2013, "Prospects of using carbonaceous nanoparticles in binders for polymer composites" Nanotechnologies in Russia, 8(3-4), 163-185.
• [15] Lubineau, G., Rahaman, A., 2012, "A review of strategies for improving the degradation properties of laminated continuous-fiber/epoxy composites with carbon-based nanoreinforcements". Carbon, 50(7), 2377-2395.
• [16] Potts, J. R., Dreyer, D. R., Bielawski, C. W., Ruoff, R. S., 2011, "Graphene-based polymer nanocomposites", Polymer, 52(1), 5-25.
• [17] Saravanan, N., Rajasekar, R., Mahalakshmi, S., Sathishkumar, T. P., Sasikumar, K. S. K., Sahoo, S., 2014, "Graphene and modified graphene-based polymer nanocomposites- A review". Journal of Reinforced Plastics and Composites, 33(12), 1158-1170.
• [18] Chandrasekaran, S., Sato, N., Tolle, F., Miilhaupt, R., Fiedler, B., Schulte, K., 2014, "Fracture toughness and failure mechanism of graphene based epoxy composites". Composites Science and Technology, 97, 90-99.
• [19]Chen, J. Y., Cho, J., Daniel, I. M., 2007, "Processing and characterization of carbon fiber/epoxy composites reinforced with graphite nanoplatelets". In ASME 2007 International Mechanical Engineering Congress and Exposition, pp. 1111-1120, American Society of Mechanical Engineers.
• [20] Verma, D., Gope, P. C, Shandilya, A., Gupta, A., 2014, "Mechanical-Thermal-Electrical and Morphological Properties of Graphene Reinforced Polymer Composites: A Review", Transactions of the Indian Institute of Metals, 67(6), 803-816.
• [21] Huang, X., Qi, X., Boey, F., Zhang, H., 2012, "Graphene-based composites". Chemical Society Reviews, 41(2), 666-686.
• [22] King, J. A., Klimek, D. R., Miskioglu, I., Odegard, G. M., 2013, „Mechanical properties of graphene nanoplatelet/epoxy composites". Journal of Applied Polymer Science, 128(6), 4217-4223.
• [23] Kuilla, T, Bhadra, S., Yao, D., Kim, N. H., Bose, S., Lee, J. H., 2010, „Recent advances in graphene based polymer composites". Progress in Polymer Science, 35(11), 1350-1375.
• [24] Mukhopadhyay, P., Gupta, R. K., 2011, "Trends and frontiers in graphene-based polymer nanocomposites". Plastics Engineering, 67(1), 32-42.
• [25] Yao, H., Sui, X., Zhao, Z., Xu, Z., Chen, L., Deng, H., Qian, X., 2015, "Optimization of interfacial microstructure and mechanical properties of carbon fiber/epoxy composites via carbon nanotube sizing". Applied Surface Science, 347,583-590.
• [26] Kula, P., Pietrasik, R., Dybowski, K., Atraszkiewicz, R., Szymanski, W., Kolodziejczyk, L., Nowak, D., 2014, "Single and multilayer growth of graphene from the liquid phase". Applied Mechanics and Materials (Vol. 510, pp. 8-12). Trans Tech Publications.
• [27] Kula, P., Pietrasik, R., Dybowski, K., Atraszkiewicz, R., Kaczmarek, L., Kazimierski, D., Modrzyk, W., 2013, "The growth of a polycrystalline graphene from a liquid phase", Nanotech, 1,210-212.
• [28] Mukhopadhyay, P. i Gupta, R. K., 2012, "Graphite, graphene and their polymer nanocomposites" CRC Press.
• [29] Drabińska, A., Grodecki, K., Strupiński, W., Bożek, R., Korona, K. P., Wysmołek, A., Baranowski, J. M., 2010. „Growth kinetics of epitaxial graphene on SiC substrates". Physical Review B, 81(24), 245410.
• [30] Urban, J. M., Dąbrowski, P., Binder, J., Kopciuszyński, M., Wysmolek, A., Klusek, Z., Baranowski, J. M., 2014, „Nitrogen doping of chemical vapor deposition grown graphene on 4H-SiC", Journal of Applied Physics, 115(23), 233504.
• [31] Hummers Jr, W. S., Offeman, R. E., 1958, "Preparation of graphitic oxide". Journal of the American Chemical Society, 80(6), 1339-1339.
• [32] Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Ruoff, R. S., 2007, "Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide", Carbon, 45(7), 1558-1565.
• [33] Geng, Y, Wang, S. J., & Kim, J. K., 2009, "Preparation of graphite nanoplatelets and graphene sheets". Journal of Colloid and Interface Science, 336(2), 592-598.
• [34] Park, S., Ruoff, R. S., 2009, "Chemical methods for the production of graphenes" Nature Nanotechnology, 4(4), 217-224.
• [35] Garg, R., Dutta, N. K., Choudhury, N. R., 2014, "Work Function Engineering of Graphene", Nanomaterials, 4(2), 267-300.
• [36] Sankovich, S., Dikin, D., Dommett, G. B., Kohlhaas, K., Zimney, E. J., Stach, E.,Piner, D., Nguyen, S., Ruoff, S., 2006, "Graphene-based composite materials". Nature, 442, 282-286.
• [37] Fan, X., Peng, W., Li, Y, Li, X., Wang, S., Zhang, G., Zhang, F., 2008, "Deoxygenation of exfoliated graphite oxide under alkaline conditions: a green route to graphene preparation" Advanced Materials, 20(23), 4490-4493.
• [38] Kuilla, T., Bose, S., Mishra, A. K., Khanra, P., Kim, N. H., Lee, J. H., 2012, "Chemical runctionalization of graphene and ils applications" Progress in Materials Science, 57(7), 1061 -1105.
• [39] Wan, Y. J., Tang, L. C, Yan, D., Zhao, L., Li, Y. B., Wu, L. B., Lai, G. Q., 2013, "Improved dispersion and interface in the graphene/epoxy composites via a facile surfactant-assisted process" Composites Science and Technology, 82,60-68.
• [40] Singh, V., Joung, D., Zhai, L., Das, S., Khondaker, S. I., Seal, S., 2011, "Graphene based materials: past, present and future". Progress in Materials Science, 56(8), 1178-1271.
• [41] Das, B., Prasad, K. E., Ramamurty, U., Rao, C. N. R., 2009, „Nano-indentation studies on polymer matrix composites reinforced by few-layer graphene", Nanotechnology, 20(12), 125705.
• [42] Mannov, E., Schmutzler, H., Chandrasekaran, S., Viets, C, Buschhorn, S., Tolle, R, Schulte, K., 2013, "Improvement of compressive strength after impact in fibre reinforced polymer composites by matrix modification with thermally reduced graphene oxide". Composites Science and Technology, 87,36-41.
• [43] Li, D., Mueller, M. B., Gilje, S., Kaner, R. B., Wallace, G. G., 2008, "Processable aqueous dispersions of graphene nanosheets". Nature Nanotechnology, 3(2), 101-105.
• [44] Tang, L. C, Wan, Y. J., Yan, D., Pei, Y. B., Zhao, L., Li, Y. B., Lai, G. Q., 2013, "The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites". Carbon, 60,16-27.
• [45] Férnandez-Merino M. J., Paredes J. I., Villar-Rodil S., Guardia L., Solis-Fernandez P., Salinas-Torres D., 2012, "Investigating the influence of surfactants on the stabilization of aqueous reduced graphene oxide dispersions and the characteristics of their composite films". Carbon, 50(9), 3184-94.
• [46] Lotya, M., King, P. J., Khan, U., De, S., Coleman, J. N., 2010, "High-concentration, surfactant-stabilized graphene dispersions", ACS Nano, 4(6), 3155-3162.
• [47] Ramanathan, T., Abdala, A. A., Stankovich, S., Dikin, D. A., Herrera-Alonso, M., Piner, R. D., Brinson, L. C, 2008, "Functionalized graphene sheets for polymer nanocomposites". Nature Nanotechnology, 3(6), 327-331.
• [48] Tjong, S. C, 2012, "Polymer Composites with Carbonaceous Nanofillers: Properties and Applications", John Wiley & Sons.
• [49] Bao, C., Guo, Y., Song, L., Kan, Y., Qian, X., Hu, Y., 2011, "In situ preparation of functionalized graphene oxide/epoxy nanocomposites with effective reinforcements". Journal of Materials Chemistry, 21(35), 13290-13298.
• [50] Kowalczyk, P., Balczunas, A., 2014, „Wybrane zastosowania grafenu w przemysle lotniczym i kosmicznym" Prace Instytutu Lotnictwa.
• [51] Shen, M. Y, Chang, T. Y, Hsieh, T. H., Li, Y. L., Chiang, C. L., Yang, H., Yip, M. C, 2013, "Mechanical properties and tensile fatigue of graphene nanoplatelets reinforced polymer nanocomposites" Journal of Nanomaterials, 1.
• [52] Wang, C, Ge, H., Liu, H., Guo, S., 2015, "Microstructure and properties of carbon fiber sized with picketing emulsion based on graphene oxide sheets and its composite with epoxy resin". Journal of Applied Polymer Science, 132(29).
• [53] Zhang, X., Fan, X., Yan, C, Li, H., Zhu, Y, Li, X., Yu, L., 2012, Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide", ACS Applied Materials & Interfaces, 4(3), 1543-1552.
• [54] Qin, W., Vautard, F., Drzal, L. T., Yu, J., 2015, "Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber-matrix interphase", Composites Part B: Engineering, 69,335-341.
• [55] Le, L. N., Zhang, B., Asmatulu, R., 2014, "Graphene Thin Films on Fiber-Reinforced Epoxy Composites for Improved Fire Retardancy", In ASME 2014 International Mechanical Engineering Congress and Exposition (pp. V001T01A030-V001T01A030). American Society of Mechanical Engineers.
• [56] Yu, A., Ramesh, R, Itkis, M. E., Bekyarova, E., Haddon, R. C, 2007, "Graphite nanoplatelet-epoxy composite thermal interface materials", The Journal of Physical Chemistry C, 111(21), 7565-7569.
• [57] Kumar A., 2012, "Incorporation of Graphene Thin Films Into the Carbon Fiber Reinforced Composite Via 3d Composite Concept Against the Lightning Strikes on Composite Aircraft", Wichita State University, College of Engineering, Department of Mechanical Engineering.
• [58] Wajid, A. S., Ahmed, H. S., Das, S., Irin, R, Jankowski, A. R, Green, M. J., 2013, "High-Performance Pristine Graphene/Epoxy Composites With Enhanced Mechanical and Electrical Properties", Macromolecular Materials and Engineering, 298(3), 339-347.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę