PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Technologies and intelligent systems for adaptive vibration control in rail transport

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Vibration diagnostics is of particular importance in rail transport safety systems because the signals received from vibration sensors installed on rolling stock, bridges, tunnels, and other infrastructure objects have great diagnostic information potential. Despite this, in practice, there are cases when the adequacy of the results of the vibration control and diagnostics task is not ensured. The reason is that the sampling step of the vibration signal does not change when the train speed changes. Given the need to change the sampling interval depending on the train speed, this article proposes an adaptive technology for vibration signal sampling that allows the building of intelligent systems of adaptive vibration control of malfunctions in rail transport.
Czasopismo
Rocznik
Strony
31--38
Opis fizyczny
Bibliogr. 8 poz.
Twórcy
autor
  • Institute of Control Systems of the Azerbaijan National Academy of Sciences; 68 B.Vahabzade, Baku AZ1141, Azerbaijan
  • Institute of Control Systems of the Azerbaijan National Academy of Sciences; 68 B.Vahabzade, Baku AZ1141, Azerbaijan
  • 3Azerbaijan University of Architecture and Construction; Ayna Sultanova 11, Baku, Azerbaijan
  • Institute of Control Systems of the Azerbaijan National Academy of Sciences; 68 B.Vahabzade, Baku AZ1141, Azerbaijan
  • Institute of Control Systems of the Azerbaijan National Academy of Sciences; 68 B.Vahabzade, Baku AZ1141, Azerbaijan
Bibliografia
  • 1. Aliev, T. Noise control of the Beginning and Development Dynamics of Accidents. Springer. 2019. 201 p.
  • 2. Collacott, R.A. Mechanical Fault Diagnosis and condition monitoring. 1977. 504 p.
  • 3. Thompson, D. Railway Noise and Vibration: Mechanisms, Modelling and Means of Control. 1st Edition. Kindle Edition. 2008. 845 p.
  • 4. Muzaffer Metin and Rahmi Guclu. Rail Vehicle Vibrations Control Using Parameters Adaptive PID Controller. Mathematical Problems in Engineering. Hindawi, 2014. No. 728946. P. 1-10.
  • 5. Lin, C.C. & Wang, J.F. & Chen, B.L. Train-Induced Vibration Control of High-Speed Railway Bridges Equipped with Multiple Tuned Mass Dampers. Journal of Bridge Engineering. 2005. Vol. 10(4). P. 398-414.
  • 6. Sun, C. & Gao, L. Medium-to-low-speed freight rail transport induced environmental vibration and analysis of the vibration isolation effect of building slope protection piles. Journal of Vibroengineering. 2017. Vol. 19. No. 6. P. 4531-4549.
  • 7. Anderson, D. & Gautier, P.E. & Iida, M. and other. Noise and Vibration Mitigation for Rail Transportation Systems. In: Proceedings of the 12th International Workshop on Railway Noise. 12-16 September 2016. Terrigal, Australia.
  • 8. Dudkin, P.E. & Andreeva, L.A. & Sultanov, N.N. Methods of Noise and Vibration Protection on Urban Rail Transport. Procedia Engineering. 2017. Vol. 189. P. 829-835.
Uwagi
PL
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-0c640c9b-a12e-4a18-9be0-e83ff9be9ebe
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.