Prediction of the process capability for compression rubber part forming in the automotive supply chain

• Autorzy: Butdee S. , Tangchaidee K.

Identyfikatory

DOI

10.5604/01.3001.0054.7761

• Języki publikacji: EN

Abstrakty

EN

Purpose: The paper proposes predicting production process capability for the compression rubber part in automotive supply chain management. Delivery of parts to tier 1 and OEM on time is the most important part of supply chain management, together with the delivery of on-quality and on-cost control to maintain the competitiveness of the supply chain. There are many suppliers to produce many automotive parts for tier 1. Therefore, the simulation approach properly predicts and prevents the process from getting into trouble during the actual production time. Production process quality control is critical to ensure that the good quality of the parts purchased can be delivered on time. Rubber parts are used widely in automotive, motorcycles, trucks, and other types of vehicles, with small sizes but in huge quantities to support general OEM brands and specific parts. The rubber part manufacturing process is complex and uncertain with compression moulding and rubber curing conditions. Therefore, good conditions can predict the production process's capability to commission and deliver on schedule. Design/methodology/approach: A neuro-fuzzy system is adopted and developed to deal with the uncertain process capability under multi-criteria decision-making. Findings: The methodology development can be used in the actual rubber part manufacturing supply chain environment and can predict uncertain problems that might occur in the subcontractor factories. Research limitations/implications: The prediction of the production process capability of the rubber part supply chain might be more effective on the real-time monitoring control system and can be tracking location part progress for further planning both success or rescheduling. Practical implications: The platform can be applied to audit and test the actual industrial supply chain, and problem and research questions are brought about from the real supply chain in the local country. Originality/value: The methodology development was originally created for the particular supply chain in rubber automotive parts that can replace the existing system to obtain a more efficient performance evaluation process.

Słowa kluczowe

EN

prediction; production capability; supply chain management; rubber part manufacturing; neuro-fuzzy system

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2024
• Tom: Vol. 124, nr 2
• Strony: 78--85
• Opis fizyczny: Bibliogr. 25 poz., rys., tab., wykr.

Twórcy

autor

Butdee S.

• Research and Development Institute, Rajamangala University of Technology Krungthep, Bangkok, Thailand

• https://orcid.org/0000-0003-4640-3916

autor

Tangchaidee K.

• College of Creative Industry, Srinakharinwirot University, Bangkok, Thailand

• https://orcid.org/0009-0007-7412-9818

Bibliografia

• [1] C.-W. Wu, W.L. Pearn, S. Kotz, An overview of theory and practice on process capability indices for quality assurance, International Journal of Production Economics 117/2 (2009) 338-359. DOI: https://doi.org/10.1016/j.ijpe.2008.11.008
• [2] Y.C. Chang, C.-W. Wu, Assessing process capability based on the lower confidence bound of Cpk for asymmetric tolerances, European Journal of Operational Research-190/1 (2008) 205-227. DOI: https://doi.org/10.1016/j.ejor.2007.06.003
• [3] W.L. Pearn, P.C. Lin, Testing process performance based on capability index Cpk with critical values, Computers and Industrial Engineering 47/4 (2004) 351-369. DOI: https://doi.org/10.1016/j.cie.2003.03.001
• [4] W.L. Pearn, C.-W. Wu, A Bayesian approach for assessing process precision based on multiple samples, European Journal of Operational Research 165/3 (2005) 685-695. DOI: https://doi.org/10.1016/j.ejor.2004.02.009
• [5] I. Madanhire, C. Mbohwa, Application of Statistical Process Control (SPC) in Manufacturing Industry in a Developing Country, Procedia CIRP 40 (2016) 580-583. DOI: https://doi.org/10.1016/j.procir.2016.01.137
• [6] O. Jadidi, T.S. Hong, F. Firouzi, R.M. Yusuff, TOPSIS and fuzzy multi-objective model integration for supplier selection problem, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 762-769.
• [7] U.E. Kocamaz, H. Taşkn, Y. Uyaroğlu, A. Göksu, Control and synchronization of chaotic supply chains using intelligent approaches, Computers and Industrial Engineering 102 (2016) 476-487. DOI: https://doi.org/10.1016/j.cie.2016.03.014
• [8] C.-S. Lee, C.-Y. Pan, An intelligent fuzzy agent for meeting scheduling decision support system, Fuzzy Sets and Systems 142/3 (2004) 467-488. DOI: https://doi.org/10.1016/S0165-0114(03)00201-X
• [9] S. Butdee, C. Nitnara, A Fuzzy Logic Combined with LP Model for Performance Evaluation to Distribute Purchase Orders in Cluster Manufacturing, Procedia Manufacturing 30 (2019) 19-25. DOI: https://doi.org/10.1016/j.promfg.2019.02.004
• [10] D. Kumar, J. Singh, O.P. Singh, Seema, A fuzzy logic based decision support system for evaluation of suppliers in supply chain management practices, Mathematical and Computer Modelling 57/11-12 (2013) 2945-2960. DOI: https://doi.org/10.1016/j.mcm.2013.03.002
• [11] P.M. Vasant, Fuzzy Production Planning and its Application to Decision Making, Journal of Intelligent Manufacturing 17 (2006) 5-12. DOI: https://doi.org/10.1007/s10845-005-5509-x
• [12] C.P. Jayarathna, D. Agdas, L. Dawes, T. Yigitcanlar, Multi-Objective Optimization for Sustainable Supply Chain and Logistics: A Review, Sustainability 13/24 (2021) 13617. DOI: https://doi.org/10.3390/su132413617
• [13] F. Cus, U. Zuperl, E. Kiker, M. Milfelner, Adaptive controller design for feedrate maximization of machining process, Journal of Achievements in Materials and Manufacturing Engineering 17/1-2 (2006) 237-240.
• [14] U. Zuperl, F. Cus, J. Balic, Intelligent cutting tool condition monitoring in milling, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 477-486.
• [15] F. Mumali, Artificial neural network-based decision support systems in manufacturing processes: a systematic literature review, Computers and Industrial Engineering 165 (2022) 107964. DOI: https://doi.org/10.1016/j.cie.2022.107964
• [16] A. Sahoo, S. Baitalik, Fuzzy Logic, Artificial Neural Network, and Adaptive Neuro-Fuzzy Inference Methodology for Soft Computation and Modeling of Ion Sensing Data of a Terpyridyl-Imidazole Based Bifunctional Receptor, Frontiers in Chemistry 10 (2022) 864363. DOI: https://doi.org/10.3389/fchem.2022.864363
• [17] Y. Xia, C. Liu, Y. Li, N. Liu, A boosted decision tree approach using Bayesian hyper-parameter optimization for credit scoring, Expert Systems with Application 78 (2017) 225-241. DOI: https://doi.org/10.1016/j.eswa.2017.02.017
• [18] M. Fathian, J. Jouzdani, M. Heydari, A. Makui, Location and transportation planning in supply chains under uncertainty and congestion by using an improved electromagnetism-like algorithm, Journal of Intelligent Manufacturing 29 (2018) 1447-1464. DOI: https://doi.org/10.1007/s10845-015-1191-9
• [19] M. Zheng, K. Wu, C. Sun, E. Pan, Optimal decisions for a two-echelon supply chain with capacity and demand information, Advance Engineering Informatics 39 (2019) 248-258. DOI: https://doi.org/10.1016/j.aei.2019.01.008
• [20] A. Surana, S. Kumara, M. Greaves, U.N. Raghavan, Supply-chain networks: a complex adaptive systems perspective, Intelligent Journal of Production Research 43/20 (2005) 4235-4265. DOI: https://doi.org/10.1080/00207540500142274
• [21] K. Govindan, H. Soleimani, D. Kannan, Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future, European Journal of Operational Research 240/3 (2015) 603-626. DOI: https://doi.org/10.1016/j.ejor.2014.07.012
• [22] A.H.I. Lee, H.-Y. Kang, C.-F. Hsu, H.-C. Hung, A green supplier selection model for high-tech industry, Expert Systems with Applications 36/4 (2009) 7917-7927. DOI: https://doi.org/10.1016/j.eswa.2008.11.052
• [23] H. Mohammadi, F.V. Farahani, M. Noroozi, A. Lashgari, Green supplier selection by developing a new group decision-making method under type 2 fuzzy uncertainty, International Journal Advance Manufacturing Technology 93 (2017) 1443-1462. DOI: https://doi.org/10.1007/s00170-017-0458-z
• [24] P. Ahi, C. Searcy, A comparative literature analysis of definitions for green and sustainable supply chain management, Journal of Cleaner Production 52 (2013) 329-341. DOI: https://doi.org/10.1016/j.jclepro.2013.02.018
• [25] B. Fahimnia, J. Sarkis, H. Davarzani, Green supply chain management: A review and bibliometric analysis, International Journal of Production Economics 162 (2015) 101-114. DOI: https://doi.org/10.1016/j.ijpe.2015.01.003