A Honeycomb Based Graded Metamaterial Muffler with Broadband Sound Attenuation and Load Bearing Performances

Li, Gen; Chen, Yan; He, Huan

doi:10.24425/aoa.2022.141651

Artykuł - szczegóły

Tytuł artykułu

A Honeycomb Based Graded Metamaterial Muffler with Broadband Sound Attenuation and Load Bearing Performances

Autorzy

Li Gen , Chen Yan , He Huan

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.24425/aoa.2022.141651

Warianty tytułu

Języki publikacji

Abstrakty

A challenge for developing acoustic metamaterials (AMMs) is considering the application of broadband muffling and load bearing capacity simultaneously. In this paper, a honeycomb based graded AMM muffler is proposed, which can widen the attenuation band and improve the structural stiffness without any external device by means of integrated design. Firstly, the acoustic and mechanical characteristics of the muffler unit cell are theoretically and numerically studied, and the graded muffler is designed based on these characteristics. The numerical results show that the graded muffler widens the attenuation bandwidth of the unit cell, and the simulation also shows that the graded muffler has greater stiffness than the uniform one. The stiffness driven muffler provides new possibilities for the design of advanced metamaterial with simultaneous sound insulation and load bearing performances.

Słowa kluczowe

acoustic metamaterials honeycomb structure phononic crystal local resonance

Wydawca

Instytut Podstawowych Problemów Techniki PAN
Komitet Akustyki PAN
Polskie Towarzystwo Akustyczne

Czasopismo

Archives of Acoustics

Rocznik

2022

Tom

Vol. 47, No. 2

Strony

213--221

Opis fizyczny

Bibliogr. 51 poz., rys. tab., wykr.

Twórcy

autor

Li Gen

State Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing University of Aeronautics and Astronautics Nanjing 210016, China
Institute of Vibration Engineering Research Nanjing University of Aeronautics and Astronautics Nanjing 210016, China

autor

Chen Yan

State Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing University of Aeronautics and Astronautics Nanjing 210016, China
Institute of Vibration Engineering Research Nanjing University of Aeronautics and Astronautics Nanjing 210016, China

autor

He Huan

hehuan@nuaa.edu.cn

State Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing University of Aeronautics and Astronautics Nanjing 210016, China
Institute of Vibration Engineering Research Nanjing University of Aeronautics and Astronautics Nanjing 210016, China
MIIT Key Laboratory of Multi-Functional Lightweight Materials and Structures Nanjing 210016, China
Laboratory of Aerospace Entry, Descent and Landing Technology Beijing 100094, China

Bibliografia

1. Aboudi J., Pindera M.-J., Arnold S.M. (1999), Higher-order theory for functionally graded materials, Composites Part B: Engineering, 30(8): 777-832, doi: 10.1016/S1359-8368(99)00053-0.
2. Asprone D., Auricchio F., Menna C., Morganti S., Prota A., Reali A. (2013), Statistical finite element analysis of the buckling behavior of honeycomb structures, Composite Structures, 105: 240-255, doi: 10.1016/j.compstruct.2013.05.014.
3. Bloch F. (1929), About the quantum mechanics of electrons in crystal lattices [in German], Zeitschrift für Physik, 52(7): 555-600, doi: 10.1007/BF01339455.
4. Brennan M.J. (1997), Characteristics of a wideband vibration neutralizer, Noise Control Engineering Journal, 45(5): 201-207, doi: 10.3397/1.2828441.
5. Camata G., Shing P.B. (2010), Static and fatigue load performance of a GFRP honeycomb bridge deck, Composites Part B: Engineering, 41(4): 299-307, doi: 10.1016/j.compositesb.2010.02.005.
6. Chen Q. et al. (2016), Plastic collapse of cylindrical shell-plate periodic honeycombs under uniaxial compression: experimental and numerical analyses, International Journal of Mechanical Sciences, 111-112: 125-133, doi: 10.1016/j.ijmecsci.2016.03.020.
7. Chen W.Q., Lee K.Y. (2003), Alternative state space formulations for magnetoelectric thermoelasticity with transverse isotropy and the application to bending analysis of nonhomogeneous plates, International Journal of Solids and Structures, 40(21): 5689-5705, doi: 10.1016/S0020-7683(03)00339-1.
8. Chen X., Xu X., Ai S., Chen H., Pei Y., Zhou X. (2014), Active acoustic metamaterials with tunable effective mass density by gradient magnetic fields, Applied Physics Letters, 105(7): 071913, doi: 10.1063/1.4893921.
9. Chen Y., Chen G., Li G., He H. (2021a), Modal analysis of flexural band gaps in a membrane acoustic metamaterial (MAM) and waveguides affected by shape characteristics, Physics Letters A, 414: 127635, doi: 10.1016/j.physleta.2021.127635.
10. Chen Y., Li G., Sun R., Chen G. (2021b), Wave dispersion in one-dimensional nonlinear local resonance phononic crystals with perturbation method, Crystals, 11(7): 1-15, doi: 10.3390/cryst11070774.
11. Cheng Z.-Q. (2001), Nonlinear bending of inhomogeneous plates, Engineering Structures, 23(10): 1359-1363, doi: 10.1016/S0141-0296(01)00017-7.
12. Correa D.M., Seepersad C.C., Haberman M.R. (2015), Mechanical design of negative stiffness honeycomb materials, Integrating Materials and Manufacturing Innovation, 4(1): 165-175, doi: 10.1186/s40192-015-0038-8.
13. Deymier P.A. [Ed.] (2013), Acoustic Metamaterials and Phononic Crystals, Springer, doi: 10.1007/978-3-642-31232-8.
14. Ding Y., Liu Z., Qiu C., Shi J. (2007), Metamaterial with simultaneously negative bulk modulus and mass density, Physical Review Letters, 99(9): 2-5, doi: 10.1103/PhysRevLett.99.093904.
15. Fan X., Verpoest I., Vandepitte D. (2006), Finite element analysis of out-of-plane compressive properties of thermoplastic honeycomb, Journal of Sandwich Structures & Materials, 8(5): 437-458, doi: 10.1177/1099636206065862.
16. Han B., Wang W., Zhang Z., Zhang Q., Jin F., Lu T. (2016), Performance enhancement of sandwich panels with honeycomb-corrugation hybrid core, Theoretical and Applied Mechanics Letters, 6(1): 54-59, doi: 10.1016/j.taml.2016.01.001.
17. Huang J., Gong X., Zhang Q., Scarpa F., Liu Y., Leng J. (2016), In-plane mechanics of a novel zero Poisson’s ratio honeycomb core, Composites Part B: Engineering, 89: 67-76, doi: 10.1016/j.compositesb.2015.11.032.
18. Jabbari M., Sohrabpour S. (2014), Mechanical and thermal stresses in a functionally graded hollow cylinder due to nonaxisymmetric steady-state loads, [in:] Encyclopedia of Thermal Stresses, Hetnarski R.B. [Ed.], pp. 2946-2952, Springer, Dordrecht, doi: 10.1007/978-94-007-2739-7_959.
19. Junger M.C., Feit D. (1986), Sound, structures, and their interaction, The MIT Press: Cambridge, Massachusetts, London, England.
20. Kawasaki A., Watanabe R. (1997), Concept and P/M fabrication of functionally gradient materials, Ceramics International, 23(1): 73-83, doi: 10.1016/0272-8842(95)00143-3.
21. Khan M.K., Baig T., Mirza S. (2012), Experimental investigation of in-plane and out-of-plane crushing of aluminum honeycomb, Materials Science and Engineering: A, 539: 135-142, doi: 10.1016/j.msea.2012.01.070.
22. Koizumi M. (1997), FGM activities in Japan, Composites Part B: Engineering, 28(1-2): 1-4, doi: 10.1016/S1359-8368(96)00016-9.
23. Kushwaha M.S., Halevi P., Dobrzynski L., Djafari-Rouhani B. (1993), Acoustic band structure of periodic elastic composites, Physical Review Letters, 71(13): 2022-2025, doi: 10.1103/PhysRevB.49.2313.
24. Li Z., Wang T., Jiang Y., Wang L., Liu D. (2018), Design-oriented crushing analysis of hexagonal honeycomb core under in-plane compression, Composite Structures, 187: 429-438, doi: 10.1016/j.compstruct.2017.12.066.
25. Liu J., Wang Z., Hui D. (2018), Blast resistance and parametric study of sandwich structure consisting of honeycomb core filled with circular metallic tubes, Composites Part B: Engineering, 145: 261-269, doi: 10.1016/j.compositesb.2018.03.005.
26. Liu Z. et al. (2000), Locally resonant sonic materials, Science, 289(5485): 1734-1736, doi: 10.1126/science.289.5485.1734.
27. Liu Z., Chan C.T., Sheng P. (2005), Analytic model of phononic crystals with local resonances, Physical Review B - Condensed Matter and Materials Physics, 71(1): 1-8, doi: 10.1103/PhysRevB.71.014103.
28. Martínez-Sala R., Sancho J., Sánchez J.V., Gómez V., Llinares J., Meseguer F. (1995), Sound attenuation by sculpture, Nature, 378(6554): 241, doi: 10.1038/378241a0.
29. Michailidis P.A., Triantafyllidis N., Shaw J.A., Grummon D.S. (2009), Superelasticity and stability of a shape memory alloy hexagonal honeycomb under in-plane compression, International Journal of Solids and Structures, 46(13): 2724-2738, doi: 10.1016/j.ijsolstr.2009.03.013.
30. Montero de Espinosa F.R., Jiménez E., Torres M. (1998), Ultrasonic Band Gap in a Periodic Two-Dimensional Composite, Physical Review Letters, 80(6-9): 1208-1211, doi: 10.1103/PhysRevLett.80.1208.
31. Naebe M., Shirvanimoghaddam K. (2016), Functionally graded materials: A review of fabrication and properties, Applied Materials Today, 5: 223-245, doi: 10.1016/j.apmt.2016.10.001.
32. Narayanamurti V., Strömer H.L., Chin M.A., Gossard A.C., Wiegmann W. (1979), Selective transmission of high-frequency phonons by a superlattice: the “dielectric” phonon filter, Physical Review Letters, 43(27): 2012-2016, doi: 10.1103/PhysRevLett.43.2012.
33. Nishida E., Koopmann G.H. (2007), A method for designing and fabricating broadband vibration absorbers for structural noise control, Journal of Vibration and Acoustics, Transactions of the ASME, 129(4): 397-405, doi: 10.1115/1.2424968.
34. Popa B.I., Zigoneanu L., Cummer S.A. (2013), Tunable active acoustic metamaterials, Physical Review B - Condensed Matter and Materials Physics, 88(2): 1-8, doi: 10.1103/PhysRevB.88.024303.
35. Qian D., Shi Z. (2017), Using PWE/FE method to calculate the band structures of the semi-infinite PCs: periodic in x-y plane and finite in z−direction, Archives of Acoustics, 42(4): 735-742, doi: 10.1515/aoa-2017-0076.
36. Shao H., He H., Chen G., Chen Y. (2020), Two new designs of lamp-type piezoelectric metamaterials for active wave propagation control, Chinese Journal of Physics, 65: 1-13, doi: 10.1016/j.cjph.2020.02.015.
37. Shen H.-S. (2002), Postbuckling analysis of axially loaded functionally graded cylindrical panels in thermal environments, International Journal of Solids and Structures, 39(24): 5991-6010, doi: 10.1016/S0020-7683(02)00479-1.
38. Sigalas M.M., Economou E.N. (1992), Elastic and acoustic wave band structure, Journal of Sound and Vibration, 158(2): 377-382, doi: 10.1016/0022-460X(92)90059-7.
39. Sun G., Hou X., Chen D., Li Q. (2017), Experimental and numerical study on honeycomb sandwich panels under bending and in-panel compression, Materials & Design, 133: 154-168, doi: 10.1016/j.matdes.2017.07.057.
40. Tsukamoto H. (2003), Analytical method of inelastic thermal stresses in a functionally graded material plate by a combination of micro- and macromechanical approaches, Composites Part B: Engineering, 34(6): 561-568, doi: 10.1016/S1359-8368(02)00037-9.
41. Vasseur J.O., Deymier P.A., Frantziskonis G., Hong G., Djafari-Rouhani B., Dobrzynski L. (1998), Experimental evidence for the existence of absolute acoustic band gaps in two-dimensional periodic composite media, Journal of Physics: Condensed Matter, 10(27): 6051-6064, doi: 10.1088/0953-8984/10/27/006.
42. Wang G., Chen S. (2015), Large low-frequency vibration attenuation induced by arrays of piezoelectric patches shunted with amplifier-resonator feedback circuits, Smart Materials and Structures, 25(1): 15004, doi: 10.1088/0964-1726/25/1/015004.
43. Wang G., Wang J., Chen S., Wen J. (2011), Vibration attenuations induced by periodic arrays of piezoelectric patches connected by enhanced resonant shunting circuits, Smart Materials and Structures, 20(12): 125019, doi: 10.1088/0964-1726/20/12/125019.
44. Wang T., An J., He H., Wen X., Xi X. (2021), A novel 3D impact energy absorption structure with negative Poisson’s ratio and its application in aircraft crashworthiness, Composite Structures, 262: 113663, doi: 10.1016/j.compstruct.2021.113663.
45. Wang Z. (2019), Recent advances in novel metallic honeycomb structure, Composites Part B: Engineering, 166: 731-741, doi: 10.1016/j.compositesb.2019.02.011.
46. Wang Z., Liu J. (2018), Mechanical performance of honeycomb filled with circular CFRP tubes, Composites Part B: Engineering, 135: 232-241, doi: 10.1016/j.compositesb.2017.09.048.
47. Wang Z., Liu J. (2019), Numerical and theoretical analysis of honeycomb structure filled with circular aluminum tubes subjected to axial compression, Composites Part B: Engineering, 165: 626-635, doi: 10.1016/j.compositesb.2019.01.070.
48. Xiang J., Du J. (2017), Energy absorption characteristics of bio-inspired honeycomb structure under axial impact loading, Materials Science and Engineering: A, 696: 283-289, doi: 10.1016/j.msea.2017.04.044.
49. Xiao S., Ma G., Li Y., Yang Z., Sheng P. (2015), Active control of membrane-type acoustic metamaterial by electric field, Applied Physics Letters, 106(9), doi: 10.1063/1.4913999.
50. Zarei Mahmoudabadi M., Sadighi M. (2011), A study on the static and dynamic loading of the foam filled metal hexagonal honeycomb - Theoretical and experimental, Materials Science and Engineering: A, 530: 333-343, doi: 10.1016/j.msea.2011.09.093.
51. Zhou J., Wang K., Xu D., Ouyang H. (2017), Multi-low-frequency flexural wave attenuation in Euler-Bernoulli beams using local resonators containing negative-stiffness mechanisms, Physics Letters A, 381(37): 3141-3148, doi: 10.1016/j.physleta.2017.08.020.

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-0c2466b8-77f8-4cec-83a4-5ca7192aa0b6