Experimental studies of design-and-technological parameters of heat exchanger

• Autorzy: Yaropud Vitalii , Kupchuk Ihor , Burlaka Serhiy , Poberezhets Julia , Babyn Ihor

Identyfikatory

DOI

10.15199/48.2022.10.10

Warianty tytułu

PL

Badania eksperymentalne parametrów konstrukcyjno-technologicznych wymiennika ciepła

• Języki publikacji: EN

Abstrakty

EN

As a result of experimental studies, a mathematical model of the influence of the length of the air duct, volumetric air flow, air temperature in the external environment on the useful thermal power of the developed heat exchanger for its given geometric parameters was obtained. As a result of experimental studies, the optimal values of the design and technological parameters of the developed heat exchanger have been established, at which its useful thermal power is maximum.

PL

W wyniku badań eksperymentalnych uzyskano model matematyczny wpływu długości kanału powietrznego, objętościowego przepływu powietrza, temperatury powietrza w środowisku zewnętrznym na użyteczną moc cieplną opracowanego wymiennika ciepła dla zadanych parametrów geometrycznych. W wyniku badań eksperymentalnych ustalono optymalne wartości parametrów konstrukcyjnych i technologicznych opracowanego wymiennika ciepła, przy których jego użyteczna moc cieplna jest maksymalna.

Słowa kluczowe

EN

three-pipe module; medium; air; power; air duct; heat; heat exchanger; temperature; pipe

PL

moduł trójrurowy; medium; powietrze; moc; kanał powietrzny; ciepło; wymiennik ciepła; temperatura; rura

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2022
• Tom: R. 98, nr 10
• Strony: 57--60
• Opis fizyczny: Bibliogr. 39 poz., fot., rys., tab.

Twórcy

autor

Yaropud Vitalii

• Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0003-0502-1356

autor

Kupchuk Ihor

• Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0002-2973-6914

autor

Burlaka Serhiy

• Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0002-4079-4867

autor

Poberezhets Julia

• Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0002-1727-6105

autor

Babyn Ihor

• Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0002-7070-4957

Bibliografia

• [1] Kaletnik G., Honcharuk I., Yemchyk T., Okhota Yu. The worldexperience in the regulation of the land circulation, European Journal of Sustainable Development, 9 (2020), nr 2, 557-568. https://doi.org/10.14207/ejsd.2020.v9n2p557
• [2] Varchenko O., Krysanov D., Shubravska O., Khakhula L., Gavryk O., Byba V., Honcharuk I. Supply chain strategy in modernization of state support instruments for small farms in Ukraine. International Journal of Supply Chain Management, 9 (2020), nr. 1, 536–543.
• [3] Kovlevsky I.A. Microclimate of livestock premises. Proceedings of the National Academy of Sciences of Belarus. Agrarian Sciences Series. (2005), № 5, 157–158.
• [4] Gunko I., Babyn I., Aliiev E., Yaropud V., Hrytsun A., Research into operating modes of the air injector of the milking parlor flushing system. UPB Scientific bulletin, Series D: Mechanical Engineering, 83 (2021), nr. 2, 297-310.
• [5] Hygiene of farm animals. Book 1. General zoohygiene. Editedby AF Kuznetsova and MV Demchuk. Agropromizdat. (1991), 200.
• [6] Yaropud V. Analytical study of the automatic ventilation system for the intake of polluted air from the pigsty. Scientific horizons.(2021), Vol. 24, No. 3, 19-27.
• [7] Departmental standards of technological design of facilities for procurement, storage and preparation of feed for livestock, VNTP SGiP-46.-8.94. Ministry of Agriculture of Ukraine. (1994),68.
• [8] VNTP-APK-04.05. Poultry enterprises. Ministry of Agrarian Policy of Ukraine, (1995), 74.
• [9] VNTP-APK-02.05. Pig enterprises (complexes, farms, small farms). Ministry of Agrarian Policy of Ukraine, (1995).
• [10] VNTP-APK-01.05. Livestock enterprises (complexes, farms, small farms). Ministry of Agrarian Policy of Ukraine, (1994), 68.
• [11] Departmental standards of technological design of livestock enterprises VNTP SGiP-46.-1.94. Ministry of Agriculture of Ukraine, (1994), 84.
• [12] Yaropud V., Hunko I., Aliiev E., Kupchuk I. Justification of the mechatronic system for pigsty microclimate maintenance. Agraarteadus. Vol. 32, №2. P. 212–218. 2021. https://doi.org/10.15159/jas.21.21
• [13] Yaropud V.M., Research of process of functioning and optimization of constructive-technological parameters of three-pipe recuperator. Engineering, energy, transport of agro-industrial complex. (2020), №1 (108), 23-32. https://doi.org/10.37128/2520-6168-2020-1-16
• [14] Poberezhets Ju., Chudak R., Kupchuk I., Yaropud V., Rutkevych V. Effect of probiotic supplement on nutrient digestibility and production traits on broiler chicken. Agraarteadus. (2021), Vol. 32, №2, 296-302. https://doi.org/10.15159/jas.21.28
• [15] Telekalo, N., Melnyk, M. Agroecological substantiation of medicago sativa cultivation technology. Agronomy Research, 18 (2020), nr. 4, 2613–2626. https://doi.org/10.15159/ar.20.181
• [16] Prishlyak V.M., Yaropud V.M. Substantiation of constructive parameters of recuperative heat utilizers for livestock premises. Collection of scientific works of Vinnytsia National Agrarian University. Series: Technical Sciences. Vinnytsia. (2014), Issue 2 (85), 102-112.
• [17] Heat exchangers such as "Pipe in a pipe" [Electronic resource]. Network resource spetsmashservis.narod.ru, LLC "SpetsMashServis". Permanent access mode: http://spetsmashservis.narod.ru/katalog_ tbm_tt_dop7.html
• [18] García-Valladares O. Numerical simulation of triple concentric-tube heat exchangers. International Journal of Thermal Sciences. (2004), № 43, 979-991.
• [19] Kaletnik G.M., Yaropud V.M. Physical and mathematical model of the ventilation system for injecting clean air in livestock premises. Engineering, energy, transport of agro-industrial complex. (2021), № 3 (114), 4-15. https://doi.org/10.37128 / 2520-6168-2021-3-1
• [20] Yaropud V.M. Heat utilizer for livestock premises. Vibrations in engineering and technology. (2017), № 4 (87), 124-128.
• [21] Prishlyak V.M., Yaropud V.M., Kovyazin O.S., Aliyev E.B. Substantiation of geometrical parameters of location of openings in air duct of three-pipe concentric heat utilizer. Industrial hydraulics and pneumatics. (2014), № 4 (46), 83-87.
• [22] Melnikov S.V., Aleshkin V.R., Roshchin P.M. Experiment planning in research of agricultural processes. Ear. (1980). 168 p.
• [23] Krasovsky G.I., Filaretov G.F. Experiment planning. BSU Publishing House, (1982), 302.
• [24] Kruglov G.A., Bulgakova R.I., Kruglova E.S. Heat engineering: Textbook. Doe Publishing House. (2010), 208.
• [25] Gunko I., Hraniak V., Yaropud V., Kupchuk I., Rutkevych V.Optical sensor of harmful air impurity concentration. Przegląd Elektrotechniczny. 97 (2021), nr. 7, 76-79. https://doi.org/10.15199/48.2021.07.15
• [26] Kupchuk I. M., Solona O. V., Derevenko I. A., Tverdokhlib I. V. Verification of the mathematical model of the energy consumption drive for vibrating disc crusher. INMATEH – Agricultural Engineering. 55 (2018), nr. 2, 113–120.
• [27] Kuznietsova I., Bandura V., Paziuk V., Tokarchuk O., Kupchuk I. Application of the differential scanning calorimetry method in the study of the tomato fruits drying process. Agraarteadus. (2020), Vol. 31, №2, 173–180. https://doi.org/10.15159/jas.20.14
• [28] Petrova Z., Paziuk V., Tokarchuk O., Polievoda Y. Special aspects of soybean drying with high seedling vigor, UPB Scientific bulletin, Series D: Mechanical Engineering, University Politehnica of Bucharest, 83 (2021), nr. 2, 327–336.
• [29] Kaletnik G., Honcharuk I., Okhota Y. The Waste-free production development for the energy autonomy formation of Ukrainian agricultural enterprises, Journal of Environmental Management and Tourism, 11 (2020), nr. 3, 513–522. https://doi.org/10.14505//jemt.v11.3(43).02
• [30] Kovbasa V., Solona O., Deikun V., Kupchuk I. Functions derivation of stresses in the soil and resistance forces to themotion of a plough share for cavity creation, UPB Scientific Bulletin, Series D: Mechanical Engineering, 83 (2021), nr 3, 305–318.
• [31] Paziuk V., Vyshnevskiy V., Tokarchuk O., Kupchuk I. Substantiation of the energy efficient schedules of drying grain seeds. Bulletin of the Transilvania University of Braşov. Series II: Forestry, Wood Industry, Agricultural Food Engineering. (2021), Vol. 14 (63), № 2, 137-146. https://doi.org/10.31926/but.fwiafe.2021.14.63.2.13
• [32] Kotov B., Spirin A., Kalinichenko R., Bandura V., Polievoda Y., Tverdokhlib I. Determination the parameters and modes of new heliocollectors constructions work for drying grain and vegetable raw material by active ventilation, Research in Agricultural Engineering, 65 (2019), nr. 1, 20–24. https://doi.org/10.17221/73/2017-RAE.
• [33] Solona O., Kovbasa V., Kupchuk I. Analytical study of soilstrain rate with a ploughshare for uncovering slit, Agraarteadus, 31 (2020), nr 2, 212–218. https://doi.org/10.15159/jas.20.22
• [34] Borysiuk D., Spirin A., Kupchuk I., Tverdokhlib I., Zelinskyi V., Smyrnov Ye., Ognevyy V. The methodology of determining the place of installation of accelerometers during vibrodiagnostic of controlled axes of wheeled tractors. Przegląd Elektrotechniczny, 97 (2021), nr. 10, 44-48. https://doi.org/10.15199/48.2021.10.09
• [35] Kotov B. I., Spirin А. В., Tverdokhlib I. V., Polyevoda Y. A., Hryshchenko V. O., Kalinichenko R. A. Theoretical researches on cooling process regularity of the grain material in the layer, INMATEH – Agricultural Engineering, 54 (2018), nr. 1, 87–94.
• [36] Honcharuk I., Kupchuk I., Solona O., Tokarchuk O., Telekalo N. Experimental research of oscillation parameters of vibrating-rotor crusher, Przeglad Elektrotechniczny. 97 (2021), nr 3, 97–100. https://doi.org/10.15199/48.2021.03.19.
• [37] Matvijchuk V., Shtuts A., Kolisnyk M., Kupchuk I., Derevenko I. Investigation of the tubular and cylindrical billets stamping by rolling process with the use of computer simulation. Periodica Polytechnica Mechanical Engineering, 66 (2022), nr 1, 51-58. https://doi.org/10.3311/PPme.18659
• [38] Rutkevych V., Kupchuk I., Yaropud V., Hraniak V., Burlaka S. Numerical simulation of the liquid distribution problem by an adaptive flow distributor. Przegląd Elektrotechniczny. (2022), Vol. 98, № 2, 64-69. https://doi.org/10.15199/48.2022.02.13
• [39] Kupchuk I., Yaropud V., Hraniak V., Poberezhets Ju., Tokarchuk O., Hontar V., Didyk A. Multicriteria compromise optimization of feed grain grinding process. Przegląd Elektrotechniczny. (2021), Vol. 97, №11, 179-183. https://doi.org/10.15199/48.2021.11.33

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).