Strength properties of corner joints and extending joints on honeycomb boards

• Autorzy: Joščák P. , Krasula P. , Vimpel' P.
• Języki publikacji: EN

Abstrakty

EN

Strength properties of corner joints and extending joints on honeycomb boards. This article deals with strength characteristics of furniture joints, which are made of honeycomb boards. We were determining load carrying capacity, deformation and stiffness of three-types corner joints, which loaded stress and tension by moment in angular plane, and two-types extending joints in the plane of the board by static four-point bending load. For corner joints we used furniture fittings VB 36 HT 50, VB INSERT 50, TAB 20 HC and for extending joints that we used fittings AVB HT a QUICK. The results of experiments and calculations are compared with classical joints which are made of wood-based materials. Strength properties of joints which are made of honeycomb boards are lower than average values of classical joints. Furniture joints which used fittings AVB HT and QUICK reached above the average load carrying capacity on the load by stress and furniture joint TAB 20 HC on the load by tension.

Słowa kluczowe

EN

honeycomb board; furniture connecting fittings; load carrying capacity of joint

PL

struktura plastra miodu; płyty meblowe; złącze narożne; okucia meblowe

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2014
• Tom: No. 87
• Strony: 97--104
• Opis fizyczny: Bibliogr. 6 poz.

Twórcy

autor

Joščák P.

• Department of Furniture and Wood Products, Faculty of Wood Sciences and Technology, Technical University in Zvolen

autor

Krasula P.

• Department of Furniture and Wood Products, Faculty of Wood Sciences and Technology, Technical University in Zvolen

autor

Vimpel' P.

• Department of Furniture and Wood Products, Faculty of Wood Sciences and Technology, Technical University in Zvolen

Bibliografia

• 1. VIMPEĽ, P. 2014. Pevnostné vlastnosti nábytkových spojov voštinových dosiek. Diplomová práca. Technická univerzita vo Zvolene. Zvolen, 2014.
• 2. JOŠČÁK, P. 1999. Pevnostné navrhovanie nábytku. 1. vydanie. Zvolen: TU Zvolen 1999 246 s. ISBN: 80-228-0921-7.
• 3. JOŠČÁK, P. - LANGOVÁ, N. – VALENT, V. 2012. Mechanical properties of single shear steel-to-timber joints with wood screws. In Annals of Warsaw University of Life Sciences. Forestry and wood technology. ISSN 1898-5912. No. 78 (2012). p. 135-139.
• 4. LANGOVÁ, N. - ROHANOVÁ, A. 2000: Analýza únosnosti jednostrižných spojov v drevených konštrukciách. Zborník. Aplikovaná mechanika 2000. TU Liberec, 2000. str. 56-59.
• 5. KOŘENÝ, A. 2013. Vlastnosti demontovatelných nábytkových spojů pro bezrámové voštinové desky. Dizertačná práca. Brno, 2013. 147 s.
• 6. JOŠČÁK, P. - GAFF, M. - LANGOVÁ, N. 2011. Nábytkové konštrukčné spoje. 1.vydanie. Zvolen: TU Zvolen 2011, 162 s. ISBN: 978-80-228-2255-8.