Development of Cloud Based Casting Defects Categorization System (CDCS)

• Autorzy: Sata A. V.

Identyfikatory

DOI

10.1515/afe-2017-0038

• Języki publikacji: EN

Abstrakty

EN

Defects affect the properties and behavior of the casting during its service life. Since the defects can occur due to different reasons, they must be correctly identified and categorized, to enable applying the appropriate remedial measures. several different approaches for categorizing casting defects have been proposed in technical literature. They mainly rely on physical description, location, and formation of defects. There is a need for a systematic approach for classifying investment casting defects, considering appropriate attributes such as their size, location, identification stage, inspection method, consistency, appearance of defects. A systematic approach for categorization of investment casting defects considering multiple attributes: detection stage, size, shape, appearance, location, consistency and severity of occurrence. Information about the relevant attributes of major defects encountered in investment casting process has been collected from an industrial foundry. This has been implemented in a cloud-based system to make the system freely and widely accessible.

Słowa kluczowe

EN

casting; defect; categorization; cloud based

PL

odlew; wady; kategorie wad

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2017
• Tom: Vol. 17, iss. 1
• Strony: 216--222
• Opis fizyczny: Bibliogr. 5 poz., rys., tab.

Twórcy

autor

Sata A. V.

• Mechanical Engineering Department, B H Gardi College of Engineering and Technology, Anandpar, Kalawad Road, 361162 Rajkot, India

Bibliografia

• [1] Alagarsamy, A. (2003). Casting Defect Analysis Procedure and A Case History. Keith Mills Symposium on Ductile Cast Iron 2003.
• [2] Donohue, T. & Frye, H. (1999). Characterization and Correction of Casting Defects. Advanced Casting Technology.
• [3] Ransing, R.S., Srinivasan, M.N., & Lewis, R.W. (1995). ICADA: Intelligent Computer Aided Defect Analysis for Castings. Journal of Intelligent Manufacturing. 6, 29-40.
• [4] Rowley, M. (1974). International Atlas of Casting Defect (1st ed.). Schaumburg: AFS.
• [5] Yu, K.O. (2001). Modeling for Casting and Solidification Processing (Illustrated ed.). Ohio: CRC press.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)