Development for Sound Quality Optimisation by Taguchi Methods

• Autorzy: Sakamoto H. , Tanabe I. , Takahashi S.
• Języki publikacji: EN

Abstrakty

EN

Characteristic that is hard to obtain in the calculation in product development. The sensory characteristic is often had such as sound quality, visual sensation and tactile sensation. The evaluation method for visualizing the determination of the customer is being established by applying Taguchi-methods and so on. The fact is still got many corresponds with the method of Try & Error as numbers of cases are small in order to optimize the properties. Therefore, the study was conducted of the method for optimization of sound quality by using the innovative tool using Taguchi-methods that newly developed. The research results are summarized as follows. (1) Sensory characteristic tuning method by using Taguchi-methods was calculated the values to be optimized in a few studies, and the result was equal to or greater than the result of specialists is carried out. (2) Commonly, the sensory characteristic of optimization is conducted with the method of Try & Error; moreover, it could be confirmed that leading to improvement of productivity by using this method even though it takes time to perform so as to optimize under changing in physical condition and environment.

Słowa kluczowe

EN

Taguchi method; optimum condition; innovation

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2015
• Tom: Vol. 15, No. 2
• Strony: 69--81
• Opis fizyczny: Bibliogr. 4 poz., tab., rys.

Twórcy

autor

Sakamoto H.

• Nagaoka University of Technology, Dept. of Information Science and Control Engineering, Nagaoka, Japan

autor

Tanabe I.

• Nagaoka University of Technology, Dept. of Mechanical Engineering, Nagaoka, Japan

autor

Takahashi S.

• Nagaoka University of Technology, Educational affairs section, Mechanics and Machinery Group, Nagaoka, Japan

Bibliografia

• [1] TATEBAYASHI K., 2005, Computer Aided Engineering Combined with Taguchi-methods, Proceeding of the 2005 Annual Meeting of the Japan Society of Mechanical Engineering, 8/05−1, 224−225.
• [2] SUGAI H., TANABE I., et al, 2006, Prediction of Optimum Machining Condition in Press Forming Using Taguchi-methods and FEM Simulation, Transactions of the JSME, 72/721, 3044−3050, (in Japanese).
• [3] TANABE I., IYAMA T., HOANG VU L., 2011, Evaluation of influence regarding control factors using inverse analysis of Taguchi-methods (Influence regarding organic matter in control factors), Transactions of Japan Society of Mechanical Engineers, 77/780, 3117−3126.
• [4] NEMOTO I., 2011, Discussion on Methods of RMS Comparison of Evoked MEGs, The 49rd Annual Conference of Japanese Society for Medical and Biological Engineering, 3, 516−521.