Study on the effect of modification with furfuryl alcohol on selected properties of poplar wood (Populus nigra L.)

• Autorzy: Drywień K. , Radomski A.
• Języki publikacji: EN

Abstrakty

EN

In these study black poplar wood (Populus nigra L.) was modified by vacuum impregnation with furfuryl alcohol with the addition of citric acid. Then it was subjected to temperature conditions in order to cure this alcohol inside the lumen. WPG, water absorbability and color change was tested on the samples that were modified with method. The aim of the research was to investigate the influence of such modification on selected properties of black poplar wood. Samples after modification was compared with the samples that were not modified and with the samples that have only been subjected to high temperature conditions with no addition of furfuryl alcohol. Furfurylated samples showed improved water reisistance, measured as absorbability. The change of color is very clear, though differences between two highest concentrations of modifier were neglibigle.

Słowa kluczowe

EN

wood modification; furfuryl alcohol; citric acid

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2018
• Tom: No. 104
• Strony: 339--344
• Opis fizyczny: Bibliogr. 14 poz.

Twórcy

autor

Drywień K.

• Department of Wood Science and Wood Protection, Faculty of Wood Technology, Warsaw University of Life Sciences - SGGW

autor

Radomski A.

• Department of Wood Science and Wood Protection, Faculty of Wood Technology, Warsaw University of Life Sciences - SGGW

Bibliografia

• 1. BAO M., HUANG X., JIANG M., YU W., YU Y. 2017: Effect of thermos-hydromechanical densification on microstructure and properties of poplar wood (Populus tomentosa). J Wood Sci 63; 591-605.
• 2. BARTKOWIAK M., DOCZEKALSKA B., STRZELECKI S. 2015: Modification of wood with furfuryl alcohol catalysed by mixture of acid ahydrides. Ann. WULSSGGW, For. And Wood Technol. 92; 26-29.
• 3. LI W., WANG H., REN D., YU Y., YU Y. 2015: Wood modification with furfuryl alcohol catalyzed by new composite acidic catalyst. Wood Sci Technol 49; 845-856.
• 4. LI Y., LIU Z., DONG X., FU Y., LIU Y. 2013: Comparison of decay resistance of wood and wood-polymer composite prepared by in-situ polymerization of monomers. International Biodeterioration & Biodegradation 84; 401-406.
• 5. MOKRZYCKI W.S., TATOL M. 2011: Colour difference ΔE - A survey. Machine Graphics and Vision 20; 383-411.
• 6. PRINCIPE M., MARTINEZ R., ORTIZ P., RIEUMONT J. 2000: The polymerization of furfuryl alcohol with p-toluenesulfonic acid: photocross-linkable feature of the polymer. Polímeros: Ciência e Tecnologia, vol. 10 (1); 8-14.
• 7. SCHNEIDER M.H., 2001: „Materiał drewniany impregnowany polimerem furanowym, sposób przygotowywania materiału drewnianego impregnowanego polimerem furanowym oraz zastosowanie materiału drewnianego impregnowanego polimerem furanowym”, patent PL 193382 B1.
• 8. SCHNEIDER M.H. 2002: „Drewno impregnowane polimerem furanowym oraz sposób przygotowania drewna impregnowanego polimerem furanowym”, patent PL 202785 B1.
• 9. SCHNEIDER M.H. 2003: „Drewno impregnowane polimerem furanowym, sposób przygotowania drewna impregnowanego polimerem furanowym, oraz zastosowanie drewna impregnowanego polimerem furanowym”, patent PL 205238 B1.
• 10. SEJATI P.S., IMBERT A., GÉRARDIN-CHARBONNIER C., NANDIKA D., PRIADI T., GÉRARDIN P. 2017: Tartaric acid catalyzed furfurylation of beech wood. Wood Sci Technol 51; 379-394.
• 11. TAGHIYARI H.R., RASSAM G., AHMADI-DEVAZDAHEMAM K. 2017: Effects of densification on untreated and nano-aluminium-oxide impregnated poplar wood. J. For. Res. 28(2); 403-410.
• 12. TODARO L., RUSSO D., CETERA P., MILELLA L. 2017: Industrial Crops & Products 109: 384-390.
• 13. VENÅS T.M., RINNAN Å. 2008: Determination of weight percent gain in solid wood modified with in situ cured furfuryl alcohol by near-infrated reflectance spectroscopy. Chemometrics and Intelligent Laboratory Systems 92; 125-130.
• 14. WESTIN M. 2003: „Sposób przygotowania drewna impregnowanego polimerem furanowym”, patent PL 204882 B1.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).