Modified Hooke-Jeeves optimization of operating parameters for required slider speeds and displacements in a feeder slider-crank mechanism

• Autorzy: Sarigecili Mehmet Ilteris , Akcali Abrahim Deniz

Identyfikatory

DOI

10.24425/ame.2022.144072

• Języki publikacji: EN

Abstrakty

EN

In such applications as in the case of feeders in which a slider-crank mechanism equipped with a rotational spring on its crank is driven by a constant force and a lumped mass at the crank-connecting rod joint center, the slider is required to take on desired speeds and displacements. For this purpose, after obtaining and solving the dynamic model of the slider-crank mechanism, the output of this model is subjected to a modified Hooke-Jeeves method resulting in the development of a procedure for the optimization of selected set of operating parameters. The basic contribution involved in the so-called Hooke-Jeeves method is the procedure by which a cost-effective advancement towards a target optimum point is accomplished in a very short time. A user-friendly interface has also been constructed to support this procedure. The optimization procedure has been illustrated on a numerical example. The validation of the resulting dynamic model has also been demonstrated.

Słowa kluczowe

EN

slider-crank; dynamic model; speed control; Hooke-Jeeves method; optimization

PL

suwak-korba; model dynamiczny; kontrola prędkości; Metoda Hooke’a-Jeevesa; optymalizacja

• Wydawca: Komitet Budowy Maszyn PAN
• Czasopismo: Archive of Mechanical Engineering
• Rocznik: 2023
• Tom: LXX, nr 1
• Strony: 63--83
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Sarigecili Mehmet Ilteris

• Department of Mechanical Engineering, Çukurova University, Adana, Turkey

• https://orcid.org/0000-0002-9969-2005

autor

Akcali Abrahim Deniz

• Department of Mechanical Engineering, Çukurova University, Adana, Turkey

• https://orcid.org/0000-0001-5194-5061

Bibliografia

• [1] M.I. Sarigecili and I.D. Akcali. Design of a uniform ice cutting device. In Proceeding of the 2nd Cilicia International Symposium on Engineering and Technology (CISET 2019), pages 311–317, Mersin, Turkey, 10-12 October, 2019.
• [2] İ.D. Akçalı and M.A. Arıoğlu. Geometric design of slider-crank mechanisms for desirable slider positions and velocities. Forschung im Ingenieurwesen, 75:61–71, 2011. doi: 10.1007/s10010-011-0134-7.
• [3] M.I. Sarigecili and I.D. Akcali. Development of constant output-input force ratio in slider-crank mechanisms. Inverse Problems in Science and Engineering, 27(5):565–588, 2019. doi: 10.1080/17415977.2018.1470625.
• [4] F. Ahmad, A.L. Hitam, K. Hudha, and H. Jamaluddin. Position tracking of slider crank mechanism using PID controller optimized by Ziegler Nichol’s method. Journal of Mechanical Engineering and Technology, 3(2):27–41, 2011.
• [5] C.D. Lee, C.W. Chuang, and C.C. Kao. Apply fuzzy PID rule to PDA based control of position control of slider crank mechanisms. In Proceeding of the IEEE Conference on Cybernetics and Intelligent Systems, pages 508–513, Singapore, 1-3 December, 2004. doi: 10.1109/ICCIS.2004.1460467.
• [6] P.A. Simionescu. Optimum synthesis of oscillating slide actuators for mechatronic applications. Journal of Computational Design and Engineering, 5(2):215–231, 2018. doi: 10.1016/j.jcde.2017.09.002.
• [7] R.R. Bulatović and S.R. Djordjević. Optimal synthesis of a four-bar linkage by method of controlled deviation. Theoretical and Applied Mechanics, 31(3-4):265–280, 2004. doi: 10.2298/TAM0404265B.
• [8] A. Arshad, P. Cong, A.A.E. Elmenshawy, and I. Blumbergs. Design optimization for the weight reduction of 2-cylinder reciprocating compressor crankshaft. Archive of Mechanical Engineering, 68(4):449–471, 2021. doi: 10.24425/ame.2021.139311.
• [9] J. Beckers, T. Verstraten, B. Verrelst, F. Contino, and J.V. Mierlo. Analysis of the dynamics of a slider-crank mechanism locally actuated with an act-and-wait controller. Mechanism and Machine Theory, 159:104253, 2021. doi: 10.1016/j.mechmachtheory.2021.104253.
• [10] A. Antoniou and W-S. Lu. Practical Optimization. Algorithms and Engineering Applications. Springer, New York, 2007. doi: 10.1007/978-0-387-71107-2.
• [11] S. Wu, J. Akroyd, S. Mosbach, G. Brownbridge, O. Parry, V. Page, W. Yang, and M. Kraft. Efficient simulation and auto-calibration of soot particle processes in Diesel engines. Applied Energy, 262:114484, 2020. doi: 10.1016/j.apenergy.2019.114484.
• [12] L. Mazouz, S.A. Zidi, A. Hafaifa, S. Hadjeri, and T. Benaissa. Optimal regulators conception for wind turbine PMSG generator using Hooke Jeeves method. Periodica Polytechnica Electrical Engineering and Computer Science, 63(3):151–158, 2019. doi: 10.3311/PPee.13548.
• [13] L. Benasla, A. Belmadani, and M. Rahli. Hooke-Jeeves’ method applied to a new economic dispatch problem formulation. Journal of Information Science and Engineering, 24(3):907–917, 2008.
• [14] C. Li and A. Rahman. Three-phase induction motor design optimization using the modified Hooke-Jeeves method. Electric Machines & Power Systems, 18(1):1–12, 1990. doi: 10.1080/07313569008909446.
• [15] L. Litvinas. A hybrid of Bayesian-based global search with Hooke–Jeeves local refinement for multi-objective optimization problems. Nonlinear Analysis: Modelling and Control, 27(3):534–555, 2022. doi: 10.15388/namc.2022.27.26558.
• [16] T.M. Alkhamis and M.A. Ahmed. A modified Hooke and Jeeves algorithm with likelihood ratio performance extrapolation for simulation optimization. European Journal of Operational Research, 174(3):1802–1815, 2006. doi: 10.1016/j.ejor.2005.04.032.
• [17] M.F. Tabassum, M. Saeed, N.A. Chaudhry, J. Ali, M. Farman, and S. Akram. Evolutionary simplex adaptive Hooke-Jeeves algorithm for economic load dispatch problem considering valve point loading effects. Ain Shams Engineering Journal, 12(1):1001–1015, 2021. doi: 10.1016/j.asej.2020.04.006.
• [18] S.C. Chapra and R. Canale. Numerical Methods for Engineers. Sixth ed. McGraw-Hill, New York, 2010.
• [19] C. Zhang, S. Hu, Y. Liu and Q. Wang. Optimal design of borehole heat exchangers based on hourly load simulation. Energy, 116(1):1180–1190, 2016. doi: 10.1016/j.energy.2016. 10.045.
• [20] M.H. Heydari, Z. Avazzadeh, C. Cattani. Taylor’s series expansion method for nonlinear variable-order fractional 2D optimal control problems. Alexandria Engineering Journal, 59(6):4737–4743, 2020. doi: 10.1016/j.aej.2020.08.035.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).