Effect of Heat Treatment on the Microstructure and Tensile Deformation Behavior of Oxide Dispersion Strengthened Alloys Manufactured by Complex Milling Process

• Autorzy: Kim Y.-K. , Kim J.-H. , Gwon J.-H. , Lee K.-A.

Identyfikatory

DOI

10.1515/amm-2017-0204

• Języki publikacji: EN

Abstrakty

EN

This study attempted to manufacture an ODS alloy by combining multiple milling processes in mechanical alloying stage to achieve high strength and fracture elongation. The complex milling process of this study conducted planetary ball milling, cryogenic ball milling and drum ball milling in sequential order, and then the microstructure and tensile deformation behavior were investigated after additional heat treatment. The oxide particles distributed within the microstructure were fine oxide particles of 5~20 nm and coarse oxide particles of 100~200 nm, and the oxide particles were confirmed to be composed of Cr, Ti, Y and O. Results of tensile tests at room temperature measured yield strength, tensile strength and elongation as 1320 MPa, 2245 MPa and 4.2%, respectively, before heat treatment, and 1161 MPa, 2020 MPa and 5.5% after heat treatment. This results indicate that the ODS alloy of this study gained very high strengths compared to other known ODS alloys, allowing greater plastic zones.

Słowa kluczowe

EN

ball milling; oxide dispersion strengthening; microstructure; tensile deformation behavior

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2B
• Strony: 1335--1340
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Kim Y.-K.

• Inha University, 100 Inha-Ro, Incheon, 22212, Korea

autor

Kim J.-H.

• Dept. of Advanced Materials Engineering, Hanbat National University, Daejeon-Si, Korea (Republic of)

autor

Gwon J.-H.

• Korloy Inc., 55 Sandan-Ro, Cheongju-Si, 28589, Korea

autor

Lee K.-A.

• Inha University, 100 Inha-Ro, Incheon, 22212, Korea

Bibliografia

• [1] A. Hirata, T. Fujita, Y.R. Wen, J.H. Schneibel, C.T. Liu, M.W. Chen, Nat. Mater. 23, 1 (2011).
• [2] V.V. Sagaradze, K.A. Kozlov, N.V. Kataeva, A.V. Litvinov, V.A. Shabashov, Phys. Metal. Metall. 113, 372 (2012).
• [3] S. Ukai, M. Fujiwara, J. Nucl. Mater. 307-311, 749 (2002).
• [4] J.H. Gwon, J.H. Kim, K.A. Lee, J. Nucl. Mater. 459, 205 (2015).
• [5] X.K. Zhu, X. Zhang, H. Wang, A.V. Sergueeva, A.K. Mukherjee, R.O. Scattergood, J. Narayan, C.C. Koch, Scripta Mater. 49, 429 (2003).
• [6] C. Tiwary, A. Verma, S. Kashyp, K. Biswas, K. Chattopadhyay, Metall. Mater. Trans. A 44, 1917 (2013).
• [7] H.K.D.H. Bhadeshia, Mater. Sci. Eng. A 223, 64 (1997).
• [8] M. Dade, J. Malaplate, J. Garnier, F.D. Geuser, N. Lochet, A. Deschamps, J. Nucl. Mater. 472, 143 (2016).
• [9] J.H. Kim, T.S. Byun, D.T. Hoelzer, J. Nucl. Mater. 407, 143 (2010).
• [10] C.W. Park, J.M. Byun, J.K. Park, Y.D. Kim, J. Korean Powder Metall. Inst. 23, 61 (2016).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)