Researching the Influence of Chemical Composition and Technological Parameters on the Quality of Copper Alloys

• Autorzy: Rzadkosz S. , Kozana J. , Kranc M.
• Języki publikacji: EN

Abstrakty

EN

The work presents the results of process efficiency of refining liquid copper with special refining agents and the analysis results of the influence of alloying components on the structure and properties of the chosen alloys. The research undertaken aimed at evaluation of the influence of alloying additives, such as aluminium, silicon and also cobalt in the chosen Cu-Zn alloys. The microstructures were researched with the help of light and scanning microscopy together with X-ray microanalysis to determine significant changes of mechanical properties.

Słowa kluczowe

EN

copper alloy; Cu-Zn alloy; mechanical properties; alloying additives; alloy refining

PL

stop miedzi; stop Cu-Zn; właściwości mechaniczne; dodatki stopowe; rafinacja stopu

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2013
• Tom: Vol. 13, iss. 1 spec.
• Strony: 153--158
• Opis fizyczny: Bibliogr. 5 poz., rys., tab., wykr.

Twórcy

autor

Rzadkosz S.

• Department of Moulding Materials, Mould Technology and Foundry of Non-Ferrous Metals, The AGH Faculty of Foundry Engineering, Reymonta St. 23, 30-059 Krakow, Poland

autor

Kozana J.

• Department of Moulding Materials, Mould Technology and Foundry of Non-Ferrous Metals, The AGH Faculty of Foundry Engineering, Reymonta St. 23, 30-059 Krakow, Poland

autor

Kranc M.

• Foundry Research Institute, Zakopiańska St. 73, 30-418 Krakow, Poland

Bibliografia

• [1] Rzadkosz, St., Kranz, M., Nowicki, P. & Piękoś, M. (2009). Refining processes of selected copper alloys. Archives of Foundry Engineering. 9(2), 29-34. ISSN 1897-3310.
• [2] Rzadkosz, St., Garbacz-Klempka, A. & Kranc, M. (2010). Structural examinations of selected copper castings. Archives of Foundry Engineering. 10(spec. 1), 435-440. ISSN 1897-3310.
• [3] Kozana, J., Rzadkosz, St. & Piękoś, M. (2008). Assessment of aluminium and silicon influence on strength properties and a microstructure of nickel brasses. Archives of Foundry Engineering. 8(4), 81-86.
• [4] Kozana, J., Rzadkosz, S., Garbacz-Klempka, A., Piękoś, M., Cieślak, W. (2012). Research into influence of selected alloying elements on the microstructure and selected mechanical and technological properties brasses : abstrakt. 90 years of educating Foundry Engineers by the AGH University of Science and Technology in Kraków; XXXVI Scientific conference Foundryman's Day 2012 Krakow, 22–23 Nov. 2012 : international workshop.
• [5] Kozana, J., Rzadkosz, St., Piękoś, M. (2010). Influence of the selected alloy additions on limiting the phase γ formation in {Cu-Zn} alloys, Archives of Foundry Engineering Polish Academy of Sciences. Commission of Foundry Engineering ; ISSN 1897-3310, 2010 Vol. 10 iss. 1 s. 221–225. — Bibliogr. s. 225, abstr.