Zero Defect Manufacturing Using Digital Numerical Control

• Autorzy: Ly Duc Minh , Bilik Peter

Identyfikatory

DOI

10.24425/mper.2022.142383

• Języki publikacji: EN

Abstrakty

EN

This paper proposes the application of the digital numerical control (DNC) technique to connect the smart meter to the inspection system and evaluate the total harmonic distortion (THD) value of power supply voltage in IEEE 519 standard by measuring the system. Experimental design by the Taguchi method is proposed to evaluate the compatibility factors to choose Urethane material as an alternative to SS400 material for roller fabrication at the machining center. Computer vision uses artificial intelligence (AI) technique to identify object iron color in distinguishing black for urethane material and white for SS400 material, color recognition results are evaluated by measuring system, system measurement is locked when the object of identification is white material SS400. Computer vision using AI technology is also used to recognize facial objects and control the layout of machining staff positions according to their respective skills. The results obtained after the study are that the surface scratches in the machining center are reduced from 100% to zero defects and the surface polishing process is eliminated, shortening production lead time, and reducing 2 employees. The total operating cost of the processing line decreased by 5785 USD per year. Minitab 18.0 software uses statistical model analysis, experimental design, and Taguchi technical analysis to evaluate the process and experimentally convert materials for roller production. MATLAB 2022a runs a computer vision model using artificial intelligence (AI) to recognize color objects to classify Urethane and SS400 materials and recognize the faces of people who control employee layout positions according to their respective skills.

Słowa kluczowe

EN

digital numerical control; Taguchi; ANOVA; Lean Six Sigma

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2022
• Tom: Vol. 13, No. 3
• Strony: 61--74
• Opis fizyczny: Bibliogr. 27 poz., il., rys., tab., wykr., zdj.

Twórcy

autor

Ly Duc Minh

• Faculty of Commerce, Van Lang University, 70000, Viet Nam
• VSB–Technical University of Ostrava, Faculty of Electrical Engineering and Computer Science, Department of Cybernetics, and Biomedical Engineering, 708 00, Ostrava, Czech Republic

autor

Bilik Peter

• VSB–Technical University of Ostrava, Faculty of Electrical Engineering and Computer Science, Department of Cybernetics, and Biomedical Engineering, 708 00, Ostrava, Czech Republic

Bibliografia

• Barot R.S., Patel J., Sharma B., Rathod B., Solanki H. and Patel Y. (2020), Lean six sigma feasibility and implementation aspect in cast iron foundry, Materials Today: Proceedings, Vol. 28, Part 2, pp. 1084–1091. DOI: 10.1016/j.matpr.2020.01.087.
• Boon Sin A., Zailani S., Iranmanesh M. and Ramayah T. (2015), Structural equation modelling on knowledge creation in Six Sigma DMAIC project and its impact on organizational performance, International Journal of Production Economics, Vol. 168, pp. 105–117. DOI: 10.1016/j.ijpe.2015.06.007.
• Burduk A., Łapczynska D. and Popiel P. (2021), Simulation Modeling in Production Effectiveness Improvement – Case Study, Management and Production Engineering Review, No. 2, Vol. 12. DOI: 10.24425/mper.2021.137680.
• Castro C.V. and de Camargo Junior J.B. (2020), The benefits and challenges of a continuous improvement area in a manufacturing plant, Quaestum, No. 1–6, Vol. 1. DOI: 10.22167/2675-441X-20200528.
• Costa T., Silva F.J.G. and Pinto Ferreira L. (2017), Improve the extrusion process in tire production using Six Sigma methodology, Procedia Manufacturing, Vol. 13, pp. 1104–1111. DOI: 10.1016/j.promfg.2017.09.171.
• Costa J.P., Lopes I.S. and Brito J.P. (2019), Six Sigma application for quality improvement of the pin insertion process, Procedia Manufacturing, Vol. 38, pp. 1592–1599. DOI: 10.1016/j.promfg.2020.01.126.
• Deeb S., Haouzi H.B.-E., Aubry A. and Dassisti M. (2018), A generic framework to support the implementation of six sigma approach in SMEs, IFACPapersOnLine, No. 11, Vol. 51, pp. 921–926. DOI: 10.1016/j.ifacol.2018.08.490.
• De Mast J. and Lokkerbol J. (2012), An analysis of the Six Sigma DMAIC method from the perspective of problem solving, International Journal of Production Economics, No. 2, Vol. 139, pp. 604–614. DOI: 10.1016/j.ijpe.2012.05.035.
• Humiras H.P. and Mukhlisin S.A. (2018), Productivity improvement picking order by appropriate method, value stream mapping analysis,and storage design: a case study in automotive part center, Management and Production Engineering Review, No. 1, Vol. 9. DOI: 10.24425/119402.
• Kauppila O., Valikangas K. and Majava J. (2020), Improving supply chain transparency between a manufacturer and suppliers: a triadic case study, Management and Production Engineering Review, No. 3, Vol. 11. DOI: 10.24425/mper.2020.134935.
• Kregel I., Stemann D., Koch J. and Coners A. (2021), Process Mining for Six Sigma: Utilising Digital Traces, Computers & Industrial Engineering, Vol. 153. DOI: 10.1016/j.cie.2020.107083.
• Krishna P.S., Jayakumar V. and Suresh Kumar S. (2019), Defect analysis and lean six sigma implementation experience in an automotive assembly line, Materials Today: Proceedings, Vol. 22, part 3, pp. 948–958. DOI: 10.1016/j.matpr.2019.11.139.
• Kosieradzka A. and Ciechańska O. (2018), Impact of enterprise maturity on the implementation of Six Sigma concept, Management and Production Engineering Review, No. 3, Vol. 9. DOI: 10.24425/119535.
• Kotliar A., Basova Y., Ivanov V., Murzabulatova O., Vasyltsova S., Litvynenko M., Zinchenko O. (2020), Ensuring the economic efficiency of enterprises by multi-criteria selection of the optimal manufacturingprocess, Management and Production Engineering Review, No. 1, Vol. 11. DOI: 10.24425/mper.2020.132943.
• Lizarelli F.L. and Toledo J.C. de. (2016), Práticas para a melhoria contínua do Processo de Desenvolvimento de Produtos: análise comparativa de múltiplos casos, Gestão & Produção, No. 3, Vol. 23, pp. 535–555. DOI: 10.1590/0104-530x2240-15.
• Minh et al. (2019), Continuous Improvement of Productivity and Quality with Lean Six-Sigma: A Case Study, Applied Mechanics and Materials, Vol. 889, pp. 557–566. DOI: 10.4028/www.scientific.net/AMM.889.557.
• Nguyen M., Phan A., and Matsui Y. (2018), Contribution of Quality Management Practices to Sustainability Performance of Vietnamese Firms, Sustainability, No. 2, Vol. 10. DOI: 10.3390/su10020375.
• Pugna A., Negrea R., and Miclea S. (2016), Using Six Sigma Methodology to Improve the Assembly Process in an Automotive Company, Procedia - Social and Behavioral Sciences, Vol. 221, pp. 308–316. DOI: 10.1016/j.sbspro.2016.05.120.
• Ranade P.B., Reddy G., Koppal P., Paithankar A., and Shevale S. (2021), Implementation of DMAIC methodology in green sand-casting process, Materials Today: Proceedings, Vol. 42, pp. 500–507. DOI: 10.1016/j.matpr.2020.10.475.
• Rewers P., Bożek M., and Kulus W. (2019), Increasing the efficiency of the production process by production levelling, Management and Production Engineering Review, No. 2, Vol. 10. DOI: 10.24425/mper.2019.129572.
• Sabry I. (2020), Six sigma methodology used to improve the mechanical properties for friction stir welding of aluminum pipes, Management and Production Engineering Review, No. 1, Vol. 11. DOI: 10.24425/mper.2020.132945.
• Sharma V., Chattopadhyaya S. and Hloch S. (2017), Surface quality finish in laser cutting using Taguchi design, Tehnicki Vjesnik – Technical Gazette, No. 1, Vol. 24. DOI: 10.17559/tv-20130719101736.
• Soliman M.H. (2017), Why Continuous Improvement Programs Fail in the Egyptian Manufacturing Organizations? A Research Study of the Evidence, Materials Processing & Manufacturing eJournal Vol. 7, pp. 202–222. DOI: 10.4236/AJIBM.2017.73016.
• Srinivasan K., Muthu S., Devadasan S.R., and Sugumaran C. (2014), Enhancing Effectiveness of Shell and Tube Heat Exchanger through Six Sigma DMAIC Phases, Procedia Engineering, Vol. 97, pp. 2064–2071. DOI: 10.1016/j.proeng.2014.12.449.
• Srisuk K. and Tippayawong K.Y. (2020), Improvement of raw material picking process in sewing machine factory using lean techniques, Management and Production Engineering Review, No. 1, Vol. 11. DOI: 10.24425/mper.2020.132946.
• Titmarsh R., Assad F., and Harrison R. (2020), Contributions of lean six sigma to sustainable manufacturing requirements: an Industry 4.0 perspective, Procedia CIRP, Vol. 90, pp. 589–593. DOI: 10.1016/j.procir.2020.02.044.
• Wirkus M. and Chmielarz A. (2018), Integration of lean management with ISO management systems in enterprise, Management and Production Engineering Review, No. 3, Vol. 9. DOI: 10.24425/119539.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)