A Numerical-Experimental Study on Da maged Beams Dynamics

Samborski, S.; Wieczorkiewicz, J.; Rusinek, R.

doi:10.17531/ein.2015.4.20

Artykuł - szczegóły

Tytuł artykułu

A Numerical-Experimental Study on Da maged Beams Dynamics

Autorzy

Samborski S. , Wieczorkiewicz J. , Rusinek R.

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.17531/ein.2015.4.20

Warianty tytułu

Numeryczno-doświadczalne studium dynamiki belek z uszkodzeniem

Języki publikacji

Abstrakty

This paper focuses on analysis of damage influence on dynamical behaviour of beams. Finite Element Method was used to simulate vibrations of beams under three variants of boundary conditions: a cantilever beam, a simply- supported beam and a symmetrically clamped beam. Analysis of natural frequencies of both intact and damaged beams was performed in order to observe the effect of damage on the beams dynamics. Next, recurrence plot technique was applied. Finally, experimental verification is performed to check the numerical results.

W pracy zaprezentowano analizę wpływu uszkodzenia na dynamiczne zachowanie belek. Do symulacji numerycznych użyto Metody Elementów Skończonych gdzie analizowano trzy warianty zamocowania belek: jednostronne utwierdzenie, swobodne podparcie i obustronne utwierdzenie. Przeprowadzono analizę częstości drgań własnych belki nieuszkodzonej i uszkodzonej a następnie zastosowano metodę wykresów rekurencyjnych aby zaobserwować różnice w ich zachowaniu dynamicznym. W ostatnim etapie przeprowadzono weryfikację eksperymentalną uzyskanych wyników symulacji.

Słowa kluczowe

damage detection recurrence plot beam dynamics free vibration

detekcja uszkodzeń wykresy rekurencyjne dynamika belki drgania własne

Wydawca

Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne

Czasopismo

Eksploatacja i Niezawodność

Rocznik

2015

Tom

Vol. 17, no. 4

Strony

624--631

Opis fizyczny

Bibliogr. 52 poz., rys., tab.

Twórcy

autor

Samborski S.

s.samborski@pollub.pl

Department of Applied Mechanics Lublin University of Technology ul. Nadbystrzycka 36, Lublin, 20-618, Poland

autor

Wieczorkiewicz J.

j.wieczorkiewicz@pollub.pl

Department of Applied Mechanics Lublin University of Technology ul. Nadbystrzycka 36, Lublin, 20-618, Poland

autor

Rusinek R.

r.rusinek@pollub.pl

Department of Applied Mechanics Lublin University of Technology ul. Nadbystrzycka 36, Lublin, 20-618, Poland

Bibliografia

1. Abaqus 6.13: analysis user's manual 2013.
2. Abarbanel HDI Analysis of Observed Chaotic Data. Springer-Verlag, New York 1996.
3. Bathe KJ. Computational fluid and solid mechanics 2003: Proceedings, Second MIT Conference on Computational Fluid and Solid Mechanics, June 17-20, 2003: On the different behaviour of porous ceramic polycrystalline materials under tension and compression stress state, Elsevier, Amsterdam and Boston 2003.
4. Cichon P, Stosiak M. Zastosowanie wibrometru laserowego do pomiaru drgań stołu symulatora liniowego napędu hydrostatycznego. Napędy i Sterowanie 2012; 5: 66–72.
5. Eckmann JP, Kamphorst SO, Ruelle D. Recurrence Plots of Dynamical Systems. Europhysics Letters (EPL) 1987; 4(9): 973–977, http://dx.doi.org/10.1209/0295-5075/4/9/004.
6. Elwakil AS, Soliman AM. Mathematical Models of the Twin-T, Wienbridgeand Family of Minimum Component Electronic Chaos Generators with Demonstrative Recurrence Plots. Chaos, Solitons & Fractals 1999; 10(8): 1399–1412, http://dx.doi.org/10.1016/S0960-0779(98)00109-X.
7. Franca LFP, Savi MA. Distinguishing Periodic and Chaotic Time Series Obtained from an Experimental Nonlinear Pendulum. Nonlinear Dynamics 2001; 26: 253–271, http://dx.doi.org/10.1023/A:1013029607482.
8. Franca LFP, Savi MA. Estimating Attractor Dimension on the Nonlinear Pendulum Time Series. Journal of the Brazilian Society of Mechanical Sciences 2001; 23(4): 427–439, http://dx.doi.org/10.1590/S0100-73862001000400004.
9. Fraser A, Swinney H. Independent coordinates for strange at- tractors from mutual information. Physical Review A 1986; 33(2): 1134–1140, http://dx.doi.org/10.1103/PhysRevA.33.1134.
10. Garc´ıa D, Trendafilova I. A multivariate data analysis approach towards vibration analysis and vibration-based damage assessment. Journal of Sound and Vibration 2014; 333(25): 7036–7050, http://dx.doi.org/10.1016/j.jsv.2014.08.014.
11. Giuliani A, Manetti C. Hidden peculiarities in the potential energy time series of a tripeptide highlighted by a recurrence plot analysis: A molecular dynamics simulation. Physical Review E 1996; 53(6): 6336–6340, http://dx.doi.org/10.1103/PhysRevE.53.6336.
12. Gradisek J, Grabec I, Siegert S, Friedrich R. Stochastic Dynamics of Metal Cutting: Bifurcation Phenomena in Turning. Mechanical Systems and Signal Processing 2002; 16(5): 831–840, http://dx.doi.org/10.1006/mssp.2001.1403.
13. Hinrichs N, Oestreich M, Popp K. Dynamics of Oscillators with Impact and Friction. Chaos Solitons and Fractals 1997; 8(4): 535–558, http://dx.doi.org/10.1016/S0960-0779(96)00121-X.
14. Ismail Z, Kuan KK, Yee KS, Chao OZ. Examining the trend in loss of flexural stiffness of simply supported RC beams with various crack severity using model updating. Measurement 2014; 50: 43–49, http://dx.doi.org/10.1016/j.measurement.2013.12.036.
15. Johnson MA, Moon FC. Nonlinear Techniques to Characterize Prechatter and Chatter Vibrations in the Machining of Metals. International Journal of Bifurcation and Chaos 2001; 2(11): 449–467, http://dx.doi.org/10.1142/S0218127401002171.
16. Kantz H, Schreiber T. Nonlinear Time Series Analysis. Cambridge University Press 1997.
17. Kecik K, Rusinek R, Warminski J. Stability Lobes Analysis of Nickel Superalloys Milling. International Journal of Bifurcation and Chaos 2011; 21(10): 1–12, http://dx.doi.org/10.1142/S0218127411030258.
18. Kennel M, Brown R, Abarbanel H. Determining embedding dimension for phase-space reconstruction using a geometrical construction Physical Review A 1992; 45(6): 3403–3411.
20. Litak G, Rusinek R Dynamics of a stainless steel turning process by statistical and recurrence analyses. Meccanica 2012; 47(6): 1517–1526, http://dx.doi.org/10.1007/s11012-011-9534-x.
21. Litak G, Kaminski T, Rusinek R, Czarnigowski J, Wendeker M. Patterns in the combustion process in a spark ignition engine. Chaos Solitons and Fractals 2008; 35: 578–585, http://dx.doi.org/10.1016/j.chaos.2006.05.053.
22. Litak G, Syta A, Rusinek R. Dynamical changes during composite milling: recurrence and multiscale entropy analysis. International Journal of Advanced Manufacturing Technology 2011; 56(5-8): 445–453, http://dx.doi.org/10.1007/s00170-011-3195-8.
23. Manetti C, Giuliani A, Ceruso MA, Webber CL, Zbilut JP. Recurrence analysis of hydration effects on nonlinear protein dynamics: multiplicative scaling and additive processes. Physics Letters A 2001; 281(5- 6): 317–323.
24. Manoach E, Trendafilova I. Large amplitude vibrations and dam- age detection of rectangular plates. Journal of Sound and Vibration 2008; 315(3): 591–606, http://dx.doi.org/10.1016/j.jsv.2008.02.016.
25. Manoach E, Samborski S, Mitura A, Warminski J. Vibration based damage detection in composite beams under temperature variations using Poincar´e maps. International Journal of Mechanical Sciences 2012; 62(1): 120–132, http://dx.doi.org/10.1016/j.ijmecsci.2012.06.006.
26. Manoach E, Warminski J, Mitura A, Samborski S. Dynamics of a composite Timoshenko beam with delamination. Mechanics Research Communications 2012; 46: 47–53, http://dx.doi.org/10.1016/j.mechrescom.2012.08.008.
27. Manoach E, Warminski J, Mitura A, Samborski S. Dynamics of a laminated composite beam with delamination and inclusions. The European Physical Journal Special Topics 2013; 222(7): 1649–1664, http://dx.doi.org/10.1140/epjst/e2013-01952-6.
28. Marwan N, Thiel M, Nowaczyk NR. Cross recurrence plot based synchronization of time series. Nonlinear Processes in Geophysics 2002; 9: 325–331, http://dx.doi.org/10.5194/npg-9-325-2002.
29. Marwan N, Wessel N, Meyerfeldt U, Schirdewan A, Kurths J. Recurrence plot-based measures of complexity and their application to heartrate-variability data. Physical Review E 2002; 66(2), http://dx.doi.org/10.1103/PhysRevE.66.026702.
30. Marwan N, Romano MC, Thiel M, Kurths J. Recurrence plots for the analysis of complex systems. Physics Reports 2007; 438: 237–329, http://dx.doi.org/10.1016/j.physrep.2006.11.001.
31. Muc A, Stawiarski A. Identification of damages in composite multilayered cylindrical panels with delaminations. Composite Structures 2012; 94(5): 1871–1879, http://dx.doi.org/10.1016/j.compstruct.2011.11.026.
32. Nayfeh AH, Balachandran B. Applied Nonlinear Dynamics - Analytical, Computational and Experimental Methods 1995. John Wiley & Sons, Inc., http://dx.doi.org/10.1002/9783527617548.
33. Nichols JM, Trickey ST, Seaver M. Damage detection using multi- variate recurrence quantification analysis. Mechanical Systems and Signal Processing 2006; 20(2): 421–437, http://dx.doi.org/10.1016/j.ymssp.2004.08.007.
34. Nichols JM, Trickey ST, Seaver M, Moniz L. Use of Fiber-optic Strain Sensors and Holder Exponents for Detecting and Localizing Dam- age in an Experimental Plate Structure. Journal of Intelligent Material Systems and Structures 2006; 18(1): 51–67, http://dx.doi.org/10.1177/1045389X06064354.
35. Nomura Y, Morimoto D, Kusaka T, Furuta H. Structural Damage Localization Based on Recurrence Plots of Chaotic Response Attractor. Transactions Of The Japan Society Of Mechanical Engineers Series C 2013; 79(807): 4210–4222, http://dx.doi.org/10.1299/kikaic.79.4210.
36. Piccoli H, Weber H. Experimental Observation of Chaotic Motion in a Rotor with Rubbing. Nonlinear Dynamics 1998; 16: 55–70, http://dx.doi.org/10.1023/A:1008284317724.
37. Poincare H. Introduction. Acta Mathematica 1890; 13(1): 5–7, http://dx.doi.org/10.1007/BF02392506.
38. Rusinek R. Cutting process of composite materials: An experimental study. International Journal of Non-Linear Mechanics 2010; 45: 458–462, http://dx.doi.org/10.1016/j.ijnonlinmec.2010.01.004.
39. Rusinek R. Vibrations In Cutting Process Of Titanium Alloy. Eksploatacja i Niezawodnosc - Maintenance and Reliability 2010; 3: 48–55.
40. Rusinek R, Warminski J. Attractor reconstruction of self-excited mechanical systems. Chaos Solitons and Fractals 2009; 40: 172–182, http://dx.doi.org/10.1016/j.chaos.2007.07.040.
41. Rusinek R, Szymanski M, Warminski J, Zadrozniak M, Morshed K Vibrations in the Human Middle Ear. Medical Science Monitor 2011; 17(12): 372–376, http://dx.doi.org/10.12659/MSM.882123.
42. Sato T, Tanaka Y. Minor Damage Detection Using Chaotic Excitation and Recurrence Analysis. Journal of Earthquake and Tsunami 2011; 05(03): 259–270, http://dx.doi.org/10.1142/S1793431111001054.
43. Sirivedin S, Fenner DN, Nath RB, Galiotis C. Effects of inter- fibre spacing and matrix cracks on stress amplification factors in carbon- fibre/epoxy matrix composites. Part I: planar array of fibres. Composites Part A: Applied Science and Manufacturing 2003; 34(12): 1227–1234, http://dx.doi.org/10.1016/S1359-835X(03)00252-5.
44. Sirivedin S, Fenner DN, Nath RB, Galiotis C. Effects of inter- fibre spacing and matrix cracks on stress amplification factors in carbonfibre/epoxy matrix composites, Part II: Hexagonal array of fibres. Composites Part A: Applied Science and Manufacturing 2006; 37(11):1936–1943, http://dx.doi.org/10.1016/j.compositesa.2005.12.022.
45. Takens F. Detecting Strange Attractors in Turbulence. Lecture Notes in Mathematics 1981; 898: 366–381, http://dx.doi.org/10.1007/BFb0091924.
46. Thomasson N, Hoeppner TJ, Webber CL, Zbilut JP. Recurrence quantification in epileptic EEGs. Physics Letters A 2001; 279(1-2): 94–101, http://dx.doi.org/10.1016/S0375-9601(00)00815-X.
47. Trendafilova I, van Brussel H. Non-linear dynamics tools for the motion analysis and condition monitoring of robot joints. Mechanical Systems and Signal Processing 2001; 15(6): 1141–1164, http://dx.doi.org/10.1006/mssp.2000.1394.
48. Trendafilova I, Manoach E. Vibration-based damage detection in plates by using time series analysis. Mechanical Systems and Signal Processing 2008; 22(5): 1092–1106, http://dx.doi.org/10.1016/j.ymssp.2007.11.020.
49. Yu A, Gupta V. Measurement of in situ fiber/matrix interface strength in graphite/epoxy composites. Composites Science and Technology 1998; 58(11): 1827–1837, http://dx.doi.org/10.1016/S0266-3538(98)00048-7.
50. Zahran O, Kasban H, El-Kordy M, El-Samie FA. Automatic weld defect identification from radiographic images. NDT & E International 2013; 57: 26–35, http://dx.doi.org/10.1016/j.ndteint.2012.11.005.
51. Zbilut JP, Koebbe M, Loeb H, Mayer-Kress G. Use of recurrence plots in the analysis of heart beat intervals. In: Computers in Cardiology, 1990: 263–266, http://dx.doi.org/10.1109/CIC.1990.144211.
52. Zolotova NV, Ponyavin DI. Phase asynchrony of the north- south sunspot activity. Astronomy and Astrophysics 2006; 449(1): L1–L4, http://dx.doi.org/10.1051/0004-6361:200600013.
53. Zou Y, Du D, Chang B, Ji L, Pan J. Automatic weld defect detection method based on Kalman filtering for real-time radio- graphic inspection of spiral pipe. NDT & E International 2015; 72: 1–9, http://dx.doi.org/10.1016/j.ndteint.2015.01.002.

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-0a00cf53-8a5c-43c9-ae30-6c9d4fdaef19