Effect of Boron Accompanied by Chromium, Vanadium and Titanium on the Transformation Temperatures of Low-Alloy Cast Steels

• Autorzy: Białobrzeska Beata , Dziurka Rafał

Identyfikatory

DOI

10.24425/amm.2023.141502

• Języki publikacji: EN

Abstrakty

EN

The purpose of the research was to examine the influence of boron on the selected properties of low-alloy cast steels. The chemical compositions of the cast steels were designed especially for this study to contain different alloy elements. The first composition lacked significant alloying elements. The subsequent grades of cast steels had the addition of chrome, chrome with vanadium, and chrome with titanium. It was decided to investigate the influence of boron in the presence of such alloying additives on the temperature of phase transformations. On the basis of dilatometric curves, the characteristic temperatures of the phase transformations were determined. Additionally, to assess the influence of the cooling rate on the structure of cast steels, an analysis of their microstructure, after full annealing and quenching, was carried out.

Słowa kluczowe

EN

boron; cast steels; dilatometric research; microstructure

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 1
• Strony: 257--267
• Opis fizyczny: Bibliogr. 38 poz., fot., rys., tab., wzory

Twórcy

autor

Białobrzeska Beata

• Wroclaw University of Science and Technology, Department of Vehicle Engineering, Smoluchowskiego Str. 25, 50-370 Wroclaw, Poland

• https://orcid.org/0000-0002-6212-5728

autor

Dziurka Rafał

• University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Sciences, Al. A. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/0000-0001-6130-8656

Bibliografia

• [1] P.L. Jain, Principles of Foundry Technology, Tata McGraw-Hill Publishing Company Limited, New Delhi (2003).
• [2] B. Kalandyk, Solidification of Metals and Alloys 31, 83-88 (1997).
• [3] B. Kalandyk, H. Matysiak, J. Głownia, Rev. Adv. Mater. 8, 44-48 (2004).
• [4] T.N. Baker, Y. Li, J.A. Wilson, A.J. Craven, DN. Crowther, Mater. Sci. Technol. 20 (6), 720-730 (2004).
• [5] H. Fu, Q. Xiao, J. Kuang, Z. Jiang, J. Xing, Mater. Sci. Eng. A 466 (1-2), 160-165 (2007).
• [6] P. Maitrepierre, D. Thivellier, J. Rofes-Vernis, Microstructure and Hardenability of Low-Alloy Boron-Containing Steel, in: V.D. Doane (Ed.), Hardenability Concepts with Application to Steels, AIME 34 (1977).
• [7] W.T. Llewellyn, W.T. Cook, Met. Technol. 4 (1), 265-278 (1977).
• [8] B. Białobrzeska, R. Jasiński, Ł. Konat, Ł. Szczepański Metals 11 (1), 162-180 (2021).
• [9] B. Białobrzeska, W. Dudziński, Arch. Metall. Mater. 60 (3A), 1649-1655 (2015).
• [10] B. Białobrzeska, R. Dziurka, A. Żak, P. Bała, Arch. Civ. Mech. Eng. 18 (2), 413-429 (2018).
• [11] K. Pawlak, B. Białobrzeska, Ł. Konat, Arch. Civ. Mech. Eng. 16 (4), 913-926 (2016).
• [12] B. Białobrzeska, Ł Konat, R Jasiński, Metals 7 (1), 26-45 (2017).
• [13] B. Bialobrzeska, P. Kostencki, Wear 328, 149-159 (2015).
• [14] Ł. Konat, J. Napiórkowski, B. Białobrzeska, Tribologia 273 (3), 67-75 (2017).
• [15] M. Szala, M. Szafran, W. Macek, S.V. Marchenko, T. Hejwowski, Adv. Sci. Technol. Res. J. 13 (4), 151-161 (2019).
• [16] J. Napiórkowski, Ł. Konat, K. Ligier. Tribologia 269 (5), 105-119 (2016).
• [17] B. Białobrzeska, Ł. Konat, Tribologia 272 (2), 7-16 (2017).
• [18] J. Napiórkowski, Ł. Konat, M. Pietruszewska, Tribologia 280 (4), 63-69 (2018).
• [19] J. Napiórkowski, M. Lemecha, Ł. Konat Tribologia 273, 111-117 (2017).
• [20] Ł. Konat, J. Napiórkowski, K. Kołakowski, Tribologia 268 (4), 101-114 (2016).
• [21] Ł. Konat, Materials 14 (16), 4541-4580 (2021).
• [22] Ł. Konat, M. Zemlik, R. Jasinski, D. Grygier, Materials 14 (11), 2850-2894 (2021).
• [23] Ł. Konat, Materials 9 (19), 915-936 (2019).
• [24] Ł. Konat, B. Białobrzeska, P. Białek, Metals 7 (9) 349-367 (2017).
• [25] B. Białobrzeska, Ł. Konat, Tribol. Trans. 65 (2) 358-374 (2022).
• [26] K. Maruszczyk, C. Klimaszewska, J. Kolan, Technol. Exploit. Mech. Eng. 1 (1-2), 59-79 (2015).
• [27] W. Bao, L. Xing, J. Qiu, Adv. Mat. Res. 183-185, 1918-1922 (2011).
• [28] B. Białobrzeska, Ironmak. Steelmak 48 (6), 649-676 (2021).
• [29] B. Białobrzeska, Metals 11 (4), 589-609 (2021).
• [30] H. Berns, W. Theiwen, Ferrous Materials, Springer Science & Business Media, Berlin (2008).
• [31] M. Durand-Charre, Microstructure of Steels and Cast Irons. Springer Science & Business Media, Berlin (2013).
• [32] D.A. Mortimer, M.G. Nicholas, Met. Sci. J. 10 (9), 326-332 (1976).
• [33] X.L. He, Acta Metall 37, 147-161 (1989).
• [34] K. Seto, D. Larson, P. Warren, G.D. Smith, Scr. Mater. 40, 1029-1034 (1999).
• [35] O.M. Akselsen, O. Grong, P.E. Kvaale, Metall. Trans. A 17A, 1529-1536 (1986).
• [36] K.J. Irvine, F.B. Pickering, W.C. Heselwood, J. Iron Steel Inst. Jpn. 186, 54-67 (1957).
• [37] H.E. Boyer, Atlas of Isothermal Transformation and Cooling Transformation Diagram, ASM, Michigan (1977).
• [38] O.G. Kasatkin, B.B. Vinokur, V.L. Pilyushenko, Met. Sci. Heat Treat. 26 (1-2), 27-31 (1984).

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).