An in vitro examination of fluoride ions release from selected materials – resin-modified glass-ionomer cement (Vitremer) and nanohybrid composite material (Tetric EvoCeram)

• Autorzy: Kosior Piotr , Klimas Sylwia , Nikodem Anna , Wolicka Justyna , Diakowska Dorota , Watras Adam , Wiglusz Rafał J. , Dobrzyński Maciej

Identyfikatory

DOI

10.37190/ABB-02251-2023-01

• Języki publikacji: EN

Abstrakty

EN

The aim of this study was to examine a short-term fluoride ions release from selected materials – resin-modified glass ionomer –Vitremer (3M ESPE) and nanohybrid universal composite – Tetric EvoCeram (IvoclarVivadent). Release of fluoride ions [µg/mm2 /h] from Tetric EvoCeram and Vitremer into nine environments (artificial saliva – AS, deionized water and 0.9% NaCl) differing in composition of the solution and pH was determined. Six samples were prepared for each solution. In the short-term study, the measurements were taken after 1, 3, 24, 48, 72 and 168 hours. The cumulative values as well as levels of fluoride ions released at concrete time intervals were compared. Within 7 days (168 hours), both materials showed variable levels of fluoride ions release. The highest value of fluoride ions release from nanohybrid Tetric EvoCeram material was reported in deionized water (8) after 24 hours (1.550 ± 0.014 [µg/mm2 /h]) and the lowest value was read in the artificial saliva AS pH 7.5 (5) after 1 hour (0.022 ± 0.001 [µg/mm2 /h]). What’s more, the highest value of Frelease from Vitremer was found in deionized water (8) after 168 hours of immersion (24.021 ± 2.280 [µg/mm2 /h]) and the lowest value was in the artificial saliva AS (without Ca2+) pH 4.5 (6) (0.303 ± 0.249 [µg/mm2 /h]) after 168 hours. Cumulated release of F– after 7 days was notably higher from resin- modified glass ionomer material – Vitremer in all artificial saliva solutions (1–7) which imitated the environment of oral cavity. Therefore, we can assume that Vitremer has better remineralization potential and it may constitute a more effective method of tooth decay prevention.

Słowa kluczowe

EN

fluoride ions release; nanohybrid composites; microhardness; resin-modified glass ionomers; tooth decay prevention

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2023
• Tom: Vol. 25, no. 1
• Strony: 101--115
• Opis fizyczny: Bibliogr. 40 poz., rys., tab., wykr.

Twórcy

autor

Kosior Piotr

• Department of Conservative Dentistry with Endodontics, Wroclaw Medical University, Wrocław, Poland

autor

Klimas Sylwia

• Department of Pediatric Dentistry and Preclinical Dentistry, Wroclaw Medical University, Wrocław, Poland

autor

Nikodem Anna

• Department of Mechanics, Materials and Biomedical Engineering, Faculty of Mechanical Engineering, Wrocław University of Science and Technology, Wrocław, Poland

autor

Wolicka Justyna

• Department of Mechanics, Materials and Biomedical Engineering, Faculty of Mechanical Engineering, Wrocław University of Science and Technology, Wrocław, Poland

autor

Diakowska Dorota

• Department of Basic Sciences, Wroclaw Medical University, Wrocław, Poland

autor

Watras Adam

• Department of Pediatric Dentistry and Preclinical Dentistry, Wroclaw Medical University, Wrocław, Poland
• Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Wrocław, Poland

autor

Wiglusz Rafał J.

• Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Wrocław, Poland
• Department of Organic Chemistry, Bioorganic Chemistry and Biotechnology, Silesian University of Technology, Gliwice, Poland

autor

Dobrzyński Maciej

• Department of Pediatric Dentistry and Preclinical Dentistry, Wroclaw Medical University, Wrocław, Poland

Bibliografia

• [1] ABUDAWOOD S., DONLY K.J., Fluoride release and re-release from various esthetic restorative materials, Am. J. Dent., 2017, 30 (1), 47–51.
• [2] BHARDWAJ A., BHARDWAJ A., MISURIYA A., MAROLI S., MANJULA S., SINGH A.K., Nanotechnology in dentistry: Present and future, J. Int. Oral Health, 2014, 6 (1), 121–126.
• [3] BHATNAGAR A., KUMAR E., SILLANPÄÄ M., Fluoride Removal from Water by Adsorption – A Review, Chem. Eng. J., 2011, 171 (3), 811–840.
• [4] CABRAL M.F., MARTINHO R.L., GUEDES-NETO M.V., REBELO M.A., PONTES D.G., COHEN-CARNEIRO F., Do conventional glass ionomer cements release more fluoride than resin-modified glass ionomer cements?, Restor. Dent. Endod., 2015, 40 (3), 209–215.
• [5] CURY J.A., TENUTA L.M.A., Enamel remineralization: controlling the caries disease or treating early caries lesions?, Braz. Oral Res., 2009, 23, 23–30.
• [6] DONLY K.J., LIU J.A., Dentin and enamel demineralization inhibition at restoration margins of Vitremer, Z 100 and Cention N, Am. J. Dent., 2018, 31 (3), 166–168.
• [7] EL MALLAKH B.F., SARKAR N.K., Fluoride release from glass-ionomer cements in de-ionized water and artificial saliva, Dent. Mater., 1990, 6, 118–122.
• [8] FITA K., DOBRZYŃSKI M., ZIĘTEK M., DIAKOWSKA D., WATRAS A., WIGLUSZ R.J., Assessment of Microstructure and Release of Fluoride Ions from Selected Fissure Sealants: An In Vitro Study, Materials (Basel), 2021, 14 (17), 4936.
• [9] GARCEZ R.M., BUZALAF M.A., DE ARAÚJO P.A., Fluoride release of six restorative materials in water and pH-cycling solutions, J. Appl. Oral Sci., 2007, 15 (5), 406–411.
• [10] GÜLSES A., AYNA M., EMMERT M., KARATABAN P., KÜBEL P., WILTFANG J., ACIL Y., Assessment of marginal integrity of five different polymers in retrograde root-end filling following apicoectomy: An in-vitro analysis with scanning electron microscope and micro-radiography, Acta Bioeng. Biomech., 2021, 23 (3), 133–145.
• [11] HAMILTON I.R., Biochemical effects of fluoride on oral bacteria, J. Dent. Res., 1990, 69, Spec No: 660–667.
• [12] HATTAB F.N., AMIN W.M., Fluoride release from glass ionomer restorative materials and the effects of surface coating, Biomaterials, 2001, 22, 1449–1458.
• [13] HAYACIBARA M.F., AMBROSANO G.M., CURY J.A., Simultaneous release of fluoride and aluminum from dental materials in various immersion media, Oper. Dent., 2004, 29 (1), 16–22.
• [14] HELVATJOGLU-ANTONIADES M., KARANTAKIS P., PAPADOGIANNIS Y., KAPETANIOS H., Fluoride release from restorative materials and a luting cement, J. Prosthet. Dent., 2001, 86 (2), 156–164.
• [15] HERMAN K., WUJCZYK M., DOBRZYŃSKI M., DIAKOWSKA D., WIGLUSZ K., WIGLUSZ R.J., In Vitro Assessment of Long-Term Fluoride Ion Release from Nanofluorapatite, Materials (Basel), 2021, 14 (13), 3747.
• [16] KANDUTI D., STERBENK P., Artnik, and fluoride: A review of use and effects on health, Mater. Socio Med., 2016, 28, 133.
• [17] KOBIERSKA-BRZOZA J., DOBRZYŃSKI M., FITA K., BADER- -ORŁOWSKA D., SZYMONOWICZ M., Currently Recommended Restorative Materials in Modern Conservative Dentistry, Polym. Med., 2015, 45, 37–43.
• [18] KONG L.X., PENG Z., LI S.D., BARTOLD P.M., Nanotechnology and its role in the management of periodontal diseases, Periodontol. 2000, 2006, 40, 184–196.
• [19] KOSIOR P., DOBRZYŃSKI M., ZAKRZEWSKA A., GROSMAN L., KORCZYŃSKI M., BLICHARSKI T., GUTBIER M., WATRAS A., WIGLUSZ R.J., Preliminary In Vitro Study of Fluoride Release from Selected Ormocer Materials, Materials (Basel), 2021, 14 (9), 2244.
• [20] LUBOJAŃSKI A, PIESIAK-PANCZYSZYN D, ZAKRZEWSKI W, DOBRZYŃSKI W, SZYMONOWICZ M, RYBAK Z, MIELAN B, WIGLUSZ RJ, WATRAS A., The Safety of Fluoride Compounds and Their Effect on the Human Body – A Narrative Review, Materials (Basel), 2023, 16 (3), 1242.
• [21] MANDEL I.D., Relation of Saliva and Plaque to Caries, J. Dent. Res., 1974, 53 (2), 246–266.
• [22] MATHUR V.P., DHILLON J.K., Dental Caries: A Disease Which Needs Attention,. Indian J. Pediatr., 2018, 85, 202–206.
• [23] MAY E., DONLY K.J., Fluoride release and re-release from a bioactive restorative material, Am. J. Dent., 2017, 30 (6), 305–308.
• [24] MOOTHEDATH M., MOOTHEDATH M., JAIRAJ A., HARSHITHA B., BABA S.M., KHATEEB S.U., Role of Nanotechnology in Dentistry: Systematic Review, J. Int. Soc. Prev. Community Dent., 2019, 9 (6), 535–541.
• [25] NAOUM S., ELLAKWA A., MARTIN F., SWAIN M., Fluoride release, recharge and mechanical property stability of various fluoride-containing resin composites, Oper. Dent., 2011, 36 (4), 422–432.
• [26] NIGAM A.G., MURTHY R., PANDEY R., Estimation of Fluoride Release from Various Dental Materials in Different Media – An In Vitro Study, Int. J. Clin. Pediatric Dent., 2009, 2, 1–8.
• [27] PERES M.A., MACPHERSON L.M.D., WEYANT R.J., DALY B., VENTURELLI R., MATHUR M.R., LISTL S., CELESTE R.K., GUARNIZO-HERREÑO C.C., KEARNS C., BENZIAN H., ALLISON P., WATT R.G., Oral diseases: a global public health challenge, Lancet, 2019, 394 (10194), 249–260.
• [28] PORENCZUK A., JANKIEWICZ B., NAURECKA M., BARTOSEWICZ B., SIERAKOWSKI B., GOZDOWSKI D., KOSTECKI J., NASIŁOWSKA B., MIELCZAREK A., A Comparison of the Remineralizing Potential of Dental Restorative Materials by Analyzing Their Fluoride Release Profiles, Adv. Clin. Exp. Med., 2019, 28, 815–823.
• [29] PYTKO-POLONCZYK J., JAKUBIK A., PRZEKLASA-BIEROWIEC A., MUSZYŃSKA B., Artificial saliva and its use in biological experiments, J. Physiol. Pharmacol., 2017, 68 (6), 807–813.
• [30] RAO B.S., MOOSANI G.K., SHANMUGARAJ M., KANNAPAN B., SHANKAR B.S., ISMAIL P.M., Fluoride release and uptake of five dental restoratives from mouthwashes and dentifrices, J. Int. Oral Health, 2015, 7 (1), 1–5.
• [31] REZK-LEGA F., ÖGAARD B., RÖLLA G., Availability of fluoride from glass-ionomer luting cements in human saliva, Eur. J. Oral Sci., 1991, 99, 60–63.
• [32] ROŠIN-GRGET K., PEROŠ K., SUTEJ I., BAŠIĆ K., The cariostatic mechanisms of fluoride, Acta Med. Acad., 2013, 42 (2), 179–88.
• [33] SIDHU S.K., NICHOLSON J.W., A Review of Glass-Ionomer Cements for Clinical Dentistry, J. Funct. Biomater., 2016, 7 (3), 16.
• [34] SIKORSKA-JAROSZYŃSKA M.H., CZELEJ G., Fluor w Stomatologii i Medycynie, Wydawnictwo Czelej, Lublin, Poland, 2000, ISBN 83-88063-09-X.
• [35] SIMMER J.P., HARDY N.C., CHINOY A.F., BARTLETT J.D., HU J.C.C., How fluoride protects dental enamel from demineralization, J. Int. Soc. Prev. Community Dent., 2020, 10 (2), 134–141.
• [36] STASZCZYK M., KĘPISTY M., KOŁODZIEJ I., KOŚCIELNIAK D., GREGORCZYK-MAGA I., CIEPŁY J., JURCZAK A., Dental Caries Status and Trend in 5-, 7- and 12-Year-Old Children from the Małopolskie Region in Comparison to the Polish Population, Nowa Stomatol., 2018, 23, 55–65.
• [37] SZTYLER K., PAJĄCZKOWSKA M., NOWICKA J., RUSAK A., CHODACZEK G., NIKODEM A., WIGLUSZ R.J., WATRAS A., DOBRZYŃSKI M., Evaluation of the microbial, cytotoxic and physico-chemical properties of the stainless steel crowns used in pediatric dentistry, Acta Bioeng. Biomech., 2022, 24 (4), 127–137. DOI: 10.37190/ ABB-02221-2023-01.
• [38] VIEIRA A.R., DE SOUZA I.P., MODESTO A., Fluoride Uptake and Release by Composites and Glass Ionomers in a High Caries Challenge Situation, Am. J. Dent., 1999, 12, 14–18.
• [39] WIEGAND A., BUCHALLA W., ATTIN T., Review on fluoridereleasing restorative materials-Fluoride release and uptake characteristics,antibacterial activity and influence on caries formation, Dent. Mater., 2007, 23, 343–362.
• [40] WILLIAMS J.A., BILLINGTON R.W., PEARSON G.J., The influence of sample dimensions on fluoride ion release from a glass ionomer restorative cement, Biomaterials, 1999, 20, 1327–1337.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).