Powertrain damage analysis for Formula Student car WT-02

• Autorzy: Hadula P. , Kaczmarczyk Ł. , Fabiś P.

Identyfikatory

DOI

10.20858/sjsutst.2017.95.5

• Języki publikacji: EN

Abstrakty

EN

This paper is a summary of the design and workmanship of a Formula Student transmission system vehicle. We conducted simulation research on transmission system damage. Damage occurred during the Formula Student competition, which is why we needed to improve the drivetrain system. The article proposes a variant of the change brackets and carrying out simulation studies on the new construction. For selected models, the transmission system, which is also determined by its impact on strength and reliability, is driven by a four-cylinder engine with a displacement of 0.6 dm3.

Słowa kluczowe

EN

Formula Student; transmission; driveline; MES simulation

PL

Formula Student; transmisja; układ napędowy; symulacja MES

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2017
• Tom: z. 95
• Strony: 47--53
• Opis fizyczny: Bibliogr. 6 poz.

Twórcy

autor

Hadula P.

• Faculty of Transport Silesian University of Technology Krasinskiego 8 street 40-019 Katowice, Poland

autor

Kaczmarczyk Ł.

• Faculty of Transport Silesian University of Technology Krasinskiego 8 street 40-019 Katowice, Poland

autor

Fabiś P.

• Faculty of Transport Silesian University of Technology Krasinskiego 8 street 40-019 Katowice, Poland

Bibliografia

• 1. Bąk Roman, Tadeusz Burczyński. 2013. Wytrzymałość Materiałów z Elementami Ujęcia Komputerowego. Warszawa: Wydawnictwo Nauki i Techniki. [In Polish: Strength of Materials with Elements of Computer Recognition. Warsaw: Science and Technology Publishing House]. ISBN: 13 978-83-7926-048-5.
• 2. SAE International. 2015. 2015 Formula SAE Rules. Warrendale, PA: SAE International.
• 3. Durand Keith. 2005. Design of a Chain Driven Limited Slip Differential and Rear Driveline Package for Formula SAE Applications. Bachelor of Science thesis. Massachusetts Institute of Technology.
• 4. Kurowski Paul. 2013. Engineering Analysis with SolidWorks Simulation 2013. Mission, KS: SDC Publications. ISBN: 978-1-58503-784-1.
• 5. Rodgers J., P. Willoughby. 1998. Rear Upright and Drive Assembly. Design project.
• 6. SolidWorks Education. 2016. Fundamentals of 3D Design and Simulation. Waltham, MA: Dassault Systèmes SolidWorks Corporation.