Evaluation of technical condition of belt conveyor FAGOR 20943

• Autorzy: Grygorowicz M. , Brzeziński P.
• Konferencja: Jubilee Symposium Vibrations In Physical Systems (25 ; 15-19.05.2012 ; Będlewo koło Poznania ; Polska)
• Języki publikacji: EN

Abstrakty

EN

This paper presents an evaluation of the technical condition of the belt conveyor FAGOR 20943. The four bearing nodes had been diagnosed. Vibration measurement in these nodes was performed according to the standard PN-ISO 10816:1. Comparing the results with standard criteria, the condition of conveyor was defined as a state B - satisfactory condition. Machinery whose vibrations are in this zone can work long term without restrictions. Diagnostic of machine and it result showed the management board of the company, how important is regular evaluation of technical condition of machinery. This can reduce the cost of production downtime caused by equipment failures.

Słowa kluczowe

EN

technical condition; PN standard; reduce of cost

PL

stan techniczny; PN-ISO 10816-1:1998; redukcja kosztów

• Wydawca: Poznan University of Technology. Institute of Applied Mechanics
• Czasopismo: Vibrations in Physical Systems
• Rocznik: 2012
• Tom: Vol. 25
• Strony: 165--170
• Opis fizyczny: Bibliogr. 4 poz., il. kolor., fot., wykr.

Twórcy

autor

Grygorowicz M.

• Poznan University of Technology, PL 60-965 Poznan Piotrowo street No. 3

autor

Brzeziński P.

• Poznan University of Technology, PL 60-965 Poznan Piotrowo street No. 3

Bibliografia

• 1. Brzeziński P., The evaluation of technical condition of belt conveyor Fagor 20943, Poznan University of Technology, Faculty of Mechanical Engineering and Management, 2010.
• 2. Polish Standard PN-90/N-01358 Vibration. Method of measurement and evaluation of machinery vibration.
• 3. PN-ISO 10186:1 Machine vibrations Evaluation based on measurements on parts of the non-spinning.
• 4. Construction of rolling bearing http://pcws.ia.polsl.pl