The real-time simulator using MATLAB/Simulink software for closed-loop coordination protection devices testing

• Autorzy: Smolarczyk Adam , Łapczyński Sebastian , Szulborski Michał , Kolimas Łukasz , Kozarek Łukasz

Identyfikatory

DOI

10.24425/bpasts.2021.137413

• Języki publikacji: EN

Abstrakty

EN

This paper aims to discuss the behavior of the proprietary real-time simulator (RTS) during testing the coordination of distance relay protections in power engineering. During the construction process of the simulator, the mapping of various dynamic phenomena occurring in the modeled part of the power system was considered. The main advantage to the solution is a lower cost of construction while maintaining high values of essential parameters, based on the generally available software environment (MATLAB/Simulink). The obtained results are discussed in detail. This paper is important from the point of view of the cost-effectiveness of design procedures, especially in power systems exploitation and when avoiding faults that result from the selection of protection relay devices, electrical devices, system operations, and optimization of operating conditions. The manuscript thoroughly discusses the hardware configuration and sample results, so that the presented real-time simulator can be reproduced by another researcher.

Słowa kluczowe

EN

real-time simulator; distance protections; protection relays testing; closed-loop testing; MATLAB/Simulink

PL

symulator czasu rzeczywistego; zabezpieczenia odległościowe; testowanie przekaźników zabezpieczeniowych; testowanie w pętli zamkniętej; MATLAB/Simulink

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2021
• Tom: Vol. 69, nr 4
• Strony: art. no. e137413
• Opis fizyczny: Bibliogr. 27 poz., rys.

Twórcy

autor

Smolarczyk Adam

• Warsaw University of Technology, Faculty of Electrical Engineering, Electrical Power Engineering Institute, 00-662 Warsaw, Poland

• https://orcid.org/0000-0001-5641-0015

autor

Łapczyński Sebastian

• Warsaw University of Technology, Faculty of Electrical Engineering, Electrical Power Engineering Institute, 00-662 Warsaw, Poland

• https://orcid.org/0000-0002-3238-6513

autor

Szulborski Michał

• Warsaw University of Technology, Faculty of Electrical Engineering, Electrical Power Engineering Institute, 00-662 Warsaw, Poland

• https://orcid.org/0000-0002-5539-6511

autor

Kolimas Łukasz

• Warsaw University of Technology, Faculty of Electrical Engineering, Electrical Power Engineering Institute, 00-662 Warsaw, Poland

• https://orcid.org/0000-0002-8311-6038

autor

Kozarek Łukasz

• ILF Consulting Engineers Polska Sp. z o.o., ul. Osmańska 12, 02-823 Warsaw, Poland

• https://orcid.org/0000-0002-2067-039X

Bibliografia

• [1] M. Faruque, T. Strasser, and G. Lauss, “Real-Time Simulation Technologies for Power Systems Design, Testing and Analysis”, IEEE Power Energy Technol. Syst. J., vol. 2, no. 2, pp. 63‒73, 2015.
• [2] P.G. McLaren, R. Kuffel, R. Wierckx, J. Giesbrecht, and L. Arendt, “A real time digital simulator for testing relays”, IEEE Trans. Power Deliv., vol. 7, no. 1, pp. 207–213, 1992.
• [3] C. Dufour and J. Belanger, “A PC-based real-time parallel symulator of electric systems and drives”, Parallel Comput. Electr. Eng., vol. 7, no. 1, pp. 105–113, 2004.
• [4] D. Majstorovic, I. Celanovic, N.D. Teslic, N. Celanovic, and V.A. Katic, “Ultralow-latency hardware-in-the-loop platform for rapid validation of power electronics designs”, IEEE Trans. Ind.. Electron., vol. 58, no. 10, pp. 4708–4716, 2011.
• [5] R. Razzaghi, M. Mitjans, F. Rachidi, and M. Paolone, “An automated FPGA real-time simulator for power electronics and power systems electromagnetic transient applications”, Electr. Power Syst. Res. vol. 141, pp. 147–156, 2016.
• [6] F.R. Blánquez, E. Rebollo, F. Blázquez, and C.A. Platero, “Real Time Power Plant Simulation Platform for Training on Electrical Protections and Automatic Voltage Regulators”, 12th International Conference on Environment and Electrical Engineering, Wroclaw, Poland, 2013, pp.18‒22.
• [7] L.A. Montoya and D. Montenegro, “Adaptive Protection Testbed Using Real time and Hardware-in-the-Loop Simulation”, IEEE International Conference PowerTech., 2013, Grenoble, France, 2013, pp. 20‒24.
• [8] M. Krakowski and Ł. Nogal, “Testing power system protections utilizing hardware-in-the-loop simulations on real-time Linux”, Bull. Pol. Acad. Sci. Tech. Sci., vol. 68, no. 5, pp. 1099‒1105, 2020.
• [9] X. Guillaud et al., “Applications of Real-Time Simulation Technologies in Power and Energy Systems”, IEEE Power Energy Technol. Syst. J., vol. 2, no. 3, pp. 103–115, 2015.
• [10] M.D. Omar Faruque et al., “Real-Time Simulation Technologies for Power Systems Design, Testing, and Analysis”, IEEE Power Energy Technol. Syst. J., vol. 2, no. 2, pp. 63–73, 2015.
• [11] R. Kuffel, D. Ouellete, and P. Forsyth, “Real time simulation and testing using IEC 61850”, Modern Electric Power Systems, (MEPS) International Symposium, 2010, pp. 1‒8.
• [12] D. Gurusinghe, S. Kariyawasam, and D. Ouellette, “Testing of IEC 61850 sampled values based digital substation automation systems”, J. Eng., vol. 15, 2018, pp. 807–811.
• [13] M. Krakowski, K. Kurek, and Ł. Nogal, “Comparative analysis of the DAQ cards-based and the IEC 61850-based real time simulations in the matlab/simulink environment for power system protections”, Electr. Power Syst. Res., vol. 192, pp. 1‒6, 2021.
• [14] RTDS Technologies Inc., Real Time Digital Simulators, [Online] Available: https://www.rtds.com, (accesed: 10.01.2019).
• [15] OPAL-RT Technologies, [Online] Available: https://www.opal-rt.com, (accesed: 10.05.2019).
• [16] Z. Yang, Y. Wang, L. Xing, B. Yin, and J.Tao, “Relay Protection Simulation and Testing of Online Setting Value Modification Based on RTDS”, IEEE Access, vol. 8, pp. 4693‒4699, 2019.
• [17] Simulink desktop realtime toolbox, [Online] Available: https://www.mathworks.com/products/simulink-desktop-real-time.html, (accesed: 10.02.2019).
• [18] F. Coffele, C. Booth, and A. Dysko, “An adaptive overcurrent protection scheme for distribution networks”, IEEE Trans. Power Deliv., vol 30, no. 1, pp. 561–568, 2015.
• [19] D. Dantas, “Energy and reactive power differential protectionhardware-in-the-loop validation for transformer application”, J. Eng., vol. 15, pp. 1160–1164, 2018.
• [20] Z. Xu, Z. Su, J. Zhang, A. Wen, and Q. Yang, “An interphase distance relaying algorithm for series-compensated transmission lines”, IEEE Trans. Power Deliv., vol. 29, no. 2, pp. 834–841, 2014.
• [21] R. Kuffel, P. Forsyth, and C. Peters, “The Role and Importance of Real Time Digital Simulation in the Development and Testing of Power System Control and Protection Equipment”, IFAC PapersOnLine, vol. 49‒27, pp. 178–182, 2016.
• [22] V. Papaspiliotopoulos, G. Korres, V. Kleftakis, and N. Hatziargyriou, “Hardware-in-theloop design and optimal setting of adaptive protection schemes for distribution systems with distributed generation”, IEEE Trans. Power Deliv., vol. 32, no. 1, pp. 393–400, 2015.
• [23] A. Smolarczyk, E. Bartosiewicz, R. Kowalik, and D.D. Rasolomampionona, „A Simple Real-Time Simulator for Protection Devices Test”, EnergyCon 2014, IEEE International Energy Conference, Dubrovnik, Croatia, 2014, pp. 837 – 843.
• [24] GE Digital Energy, D60 Line Distance Protection System. UR Series Instruction Manual, (accessed: 12.06.2018).
• [25] Advantech, [Online] Available: https://www.www.advantech.com, (accessed: 15.07.2019).
• [26] OMICRON electronics, CMS 156 Reference Manual,Version CMS156.AE.9, (accessed: 14.07.2020).
• [27] P. Opała, “Extension of a real time simulator for testing of protection relays”, M.Sc. thesis, Warsaw University of Technology, Electrical Power Engineering Institute, Warsaw, 2018.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).