Innovative technical solutions for evaporation of multilayer coatings by EB-PVD method

• Autorzy: Mazurkiewicz A. , Smolik J. , Zbrowski A. , Kacprzyńska J.

Identyfikatory

DOI

10.1016/j.acme.2013.09.008

• Języki publikacji: EN

Abstrakty

EN

The article presents problems concerning the use of the EB-PVD method (electron beam physical vapour deposition) for the evaporation of materials with different thermal properties including different coefficients of thermal conductivity, different melting points and evaporation temperatures. The evaporation process of material by electron beam was described and also the technical solutions for crucibles and devices that enable the production of composite coatings by EB-PVD were presented. The authors presented an innovative design of a multi-position modular crucible that provides different cooling intensity for materials with different thermal properties. This enables the efficient evaporation of various materials in the same technological process, which is essential for composing compound coatings, i.e. multi-component, composite and multi-layer.

Słowa kluczowe

EN

EB-PVD; electron beam; multi-position crucible

PL

wiązki elektronów; metoda EB-PVD; przewodnictwo cieplne

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2014
• Tom: Vol. 14, no. 2
• Strony: 250--254
• Opis fizyczny: Bibliogr. 8 poz., rys.

Twórcy

autor

Mazurkiewicz A.

• Institute for Sustainable Technologies, Department of Surface Engineering, Pulaskiego 6/10, 26-600 Radom, Poland

autor

Smolik J.

• Institute for Sustainable Technologies, Department of Surface Engineering, Pulaskiego 6/10, 26-600 Radom, Poland

autor

Zbrowski A.

• Institute for Sustainable Technologies, Department of Surface Engineering, Pulaskiego 6/10, 26-600 Radom, Poland

autor

Kacprzyńska J.

• Institute for Sustainable Technologies, Department of Surface Engineering, Pulaskiego 6/10, 26-600 Radom, Poland

Bibliografia

• [1] C. Donet, A. Erdemi, Historical developments and new trends in tribological and solid lubricant coatings, Surface and Coatings Technology 180–181 (2004) 76–84.
• [2] A. Mazurkiewicz, J. Smolik, Comparative analysis of wear mechanism of different types of forging dies, Archives of Materials Science and Engineering 49 (2011) 40–45.
• [3] B.A. Movchan, G.S. Marinski, Gradient protective coatings of different application produced by EB-PVD, Surface and Coatings Technology 100–101 (1998) 309–315.
• [4] B.A. Movchan, K.Y. Yakowchuk, Graded thermal barrier coatings, deposited by EB-PVD, Surface and Coatings Technology 188–189 (2004) 85–92.
• [5] M. Richert, A. Mazurkiewicz, J. Smolik, The deposition of WC-Co coatings by EBPVD technique, Archives of Metallurgy and Materials 57 (2012) 511–516.
• [6] K. Vutova, V. Vassilieva, G. Mladenov, Simulation of the heat transfer process through treated metal, molted in a water-cooled crucible by an electron beam, Vacuum 48 (2) (1997) 143–148.
• [7] V. Prabhu, V. Indraneel, C. Sohyung, S. Jogender, Rapid manufacturing of rhenium components using EB-PVD, Rapid Prototyping Journal 11 (2005) 66–73.
• [8] W. Sielanko, A. Czopik, M. Jędrzejczyk, A. Kulabko, S. Krawczyk, M. Kozłowski, Odchylanie wiązki elektronów o dużej mocy w urządzeniach EB-PVD, Problemy Eksploatacji 1 (2007) 137–144.