Influence of effectiveness speed in mechanical properties of AW6060 T66 (PA38) alloy

• Autorzy: Panasiuk K.

Identyfikatory

DOI

10.5604/01.3001.0010.3133

• Języki publikacji: EN

Abstrakty

EN

The article examines the effect of the change in the speed of deformation on the mechanical properties of AW 6060 alloy specimens, characterized by high mechanical strength, which is a material used in the shipbuilding industry. The theoretical basis for the influence of load speed on the mechanical properties of materials is presented. Static and dynamic tensile test was conducted on a universal testing machine. Dynamic stretching was performed on samples at 10–1 s–1 – 102 s–1. Done charts and tables showing results. Calculated in accordance with DIN EN ISO 6892-1 2010P total elongation and contraction of the sample. Comparison of the results of the study with the current knowledge of the subject. Material studies have shown that increasing the deformation rate results in an increase in the yield point and tensile strength. On the basis of calculations of the narrowing and elongation of the total sample, the material can be strengthened. The rate of deformation of the materials is favourable for their strengthening by increasing the limit of tensile strength. Given that most of the design is subject to dynamic loads and the aluminum alloy AW 6060 finds extensive use in shipbuilding and beyond, these are satisfactory results.

Słowa kluczowe

EN

alloy aluminum; static load; dynamic load; yield strength; strength limit

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2017
• Tom: Vol. 24, No. 4
• Strony: 219--226
• Opis fizyczny: Bibliogr. 16 poz., rys.

Twórcy

autor

Panasiuk K.

• Maritime University of Gdynia Department of Mechanical engineering Morska Street 81-87, 81-225 Gdynia, Poland tel.: [phone], fax: [phone]

Bibliografia

• [1] Doniec, K. Mikrostrukturalne aspekty ograniczonej plastyczności materiałów o strukturach silnie rozdrobnionych, Rozprawa Doktorska, AGH, Krakow 2011. [2] Follansbee, P. S., Huang, J. C., Low-temperature and high-strain-rate deformation of nickel and nickel-carbon alloys and analysis of the constitutive behaviour according to an internal state variable model, Acta Metallurgica et Materialia, Vol. 38, No 7, pp. 1241-1254, 1990.
• [3] Follansbee, P. S., Fundamentals of strength, Wiley, New Jersey 2014.
• [4] Katarzyński, S., Kocańda, S., Zakrzewski, M., Badanie własności mechanicznych metali, Wydawnictwo Naukowo-Techniczne, Warszawa 1969.
• [5] Kinslov, R., High-Velocity Impact Phenomena, Academic Press, New York & London 1970.
• [6] Kłosowski, P., Woźnica, K., Nieliniowe lepkoplastyczne prawa konstytutywne w wybranych zastosowaniach analizy konstrukcji, Wyd. Politechniki Gdańskiej, Gdansk 2007. [7] Kyzioł, L., Garbacz, G., Zależność wytrzymałości stali austenitycznej 0H18N9S od szybkości, Logistyka, pp. 6520-6528, 2014.
• [8] Kyzioł, L., The influence of temperature and strain rate on the strengthening of metallic materials, Journal of KONES Powertrain and Transport, Vol. 23, No. 1, 2016.
• [9] Malvern, E. L., Behavior of Materials Under Dynamic Loading, ASME Publ., New York 1965.
• [10] Muszka, K., Majta, J., Śleboda, T., Stefańska-Kądziela, M., Comparasion of the mechanical response of HSLA steel deformed under static and dynamic loading conditions, Proc. of the 10th International Conference on Metal Forming, pp. 747-752, GRIPS Media, Krakow 2004. [11] Owolab, G., Odoh, D., Peterson, A., Odeshi, A.,Whitworth, H., Measurement of the deformation of aluminum alloys under high strain rates using high speed digital cameras, World Journal of Mechanics, pp. 112-121, 2013.
• [12] Perzyna, P., Pęcherski, R., Analiza wpływu prędkości odkształcenie na zniszczenie plastyczne metali, Prace IPPT-PAN, s. 27, Warszawa 1979.
• [13] Sabirov, I., Barnett, M. R., Timokhina, I., Hodgson, P. D., Enhaced tensile ductility of an ultra-fine-grained aluminium alloy, Scripta Materilia, Vol. 58, Iss. 3, pp. 163-166, 2008.
• [14] Sabirov, I., Barnett, M. R., Timokhina, I., Hodgson, P. D., Tensile deformation of an ultra-fine-grained aluminium alloy, Micro shear banding and grain boundary sliding, Acta Materialia, Vol. 56, Iss. 10, pp. 2223-2230, 2008.
• [15] Sokolov, L., Soprotivlenie metallov plastičeskoj deformacji, GNTI, Moskva 1963.
• [16] Takata, N., Okitsu, Y., Tsuju, N., Dynamic deformation behaviour of ultrafine grained aluminium produced by ARB and subsequent annealing, Journal of Materials Science, Vol. 43, pp. 73-85, 2008.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).