Optimal selection of inner-branches parameters of matching circuits under the minimum branch-current RMS values and zero active-power conditions

• Autorzy: Jaraczewski M.

Identyfikatory

DOI

10.24425/bpasts.2020.134193

• Języki publikacji: EN

Abstrakty

EN

The article is a continuation of a study on the synthesis of matching multi-terminal networks, also known as compensators. The reactive four-terminal-network compensators for linear loads were introduced in previous publications, but it appeared they operate effectively with nonlinear loads too. The methods to create a compensator for a mono-harmonic source, which allows complete independence of the input from output waveforms, ensuring optimal operating conditions for the source, are presented herein. The work for the first time presents the optimal four-terminal-network compensator applied to a nonlinear load.

Słowa kluczowe

EN

multi-terminal-network compensators; optimization; nonlinear load

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2020
• Tom: Vol. 68, nr 4
• Strony: 777--783
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Jaraczewski M.

• Politechnika Krakowska, ul. Warszawska 24, 31-155 Kraków, Poland

Bibliografia

• [1] L.S. Czarnecki, “Currents’ Physical Components (CPC) concept: a fundamental for power theory”, Przegląd Elektrotechniczny 84 (6), 28–37 (2008).
• [2] Z.M. Ali, F.Q. Alenezi, S.S. Kandil, and S. Aleem, “Practical considerations for reactive power sharing approaches among multiple-arm passive filters in non-sinusoidal power systems”, Int. J. Electr. Power Energy Syst. 103, 660–675 (2018).
• [3] H.E. Shady, A. Abdel, M.E. Balci, and S. Selcuk, “Effective utilization of cables and transformers using passive filters for non-linear loads”, Int. J. Electr. Power Energy Syst. 71, 344–350 (2015).
• [4] H.E. Shady, A. Abdel, A.F..Zobaab, and M.E. Balci, “Optimal resonance-free third-order high-pass filters based on minimization of the total cost of the filters using Crow Search Algorithm”, Electr. Power Syst. Res. 151, 381–394 (2017).
• [5] M. Siwczyński, and M. Jaraczewski, “Electric circuit analysis by means of optimization criteria part II – Complex circuits”, Bull. Pol. Ac.: Tech. 54 (1), 107–124 (2006).
• [6] M. Siwczyński and M. Jaraczewski, “Electric circuit analysis by means of optimization criteria Part I – The simple circuits”, Bull. Pol. Ac.: Tech. 52 (4), 359–367 (2004).
• [7] M. Jaraczewski, “Four-terminal network reactive compensators for sinusoidal signals”, Przeglad Elektrotechniczny 93 (5), 44–47 (2017) [in Polish].
• [8] M. Jaraczewski, “Reactive T-topology four-terminal-network compensator for multiharmonic current”, Technical Transactions 12, 117–126 (2018).
• [9] M. Siwczyński and K. Hawron, “Optimum tasks and solutions for energy transmission from the source to the receiver”, Bull. Pol. Ac.: Tech. 66 (5), 655–663 (2018).

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).