Enhancement of the corrosion resistance for stainless steel 316 by applying laser shock peening

• Autorzy: Jasim Sarah A. , Ayesh Ammar , Kadhim A. , Abdullah Oday I.

Identyfikatory

DOI

10.2478/pjct-2024-0001

• Języki publikacji: EN

Abstrakty

EN

This research paper focuses on enhancing the surface characteristics of the 316 stainless steel (SS316) alloy, including roughness, microhardness, and corrosion resistance. Where the application of ND-YAG laser technology, a highly relevant and timely area, was investigated deeply. The Q-switching Nd: YAG Laser was used with varying laser energy levels within the context of the laser shock peening (LSP) technique. The corrosion resistance of the 316 ss alloy is evaluated in a corrosive environment of 500 mL of saliva (with a pH of 5.6) through electrochemical corrosion testing. Corrosion rate was determined based on the analysis of polarization curves. The outcomes of this research reveal that as the laser energy was increased, there was a noticeable enhancement in the mechanical properties of the 316 ss alloy’s surface. Importantly, the corrosion rate experiences a significant reduction, decreasing from 4.94 mm/yr to 3.59 mm/yr following laser shock peening (LSP) application.

Słowa kluczowe

EN

ND-YAG laser; neodymium-doped yttrium aluminum garnet laser; corrosion; 316 ss Alloy; stainless steel; saliva

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2024
• Tom: Vol. 26, nr 1
• Strony: 1--7
• Opis fizyczny: Bibliogr. 17 poz., tab., wz.

Twórcy

autor

Jasim Sarah A.

• College of Science, Diyala University, Iraq

autor

Ayesh Ammar

• Physics Dept, College of Science, Diyala University, Iraq

autor

Kadhim A.

• Laser and Optoelectronic Eng. Dept, University of Technology, Iraq

autor

Abdullah Oday I.

• Department of Energy Engineering, College of Engineering, University of Baghdad, Iraq
• Department of Mechanics, Al-Farabi Kazakh National University Almaty, Kazakhstan
• Mechanical Engineering Department, College of Engineering, Gulf University Sanad, Bahrain

Bibliografia

• 1. Wang, Y., Wang, W., Liu, Y., Zhong, L. & Wang, J. (2011). Study of localized corrosion of 304 stainless steel under chloride solution droplets using the wire beam electrode. J. Corros. Sci., 53(9), 2963–2968. DOI: 10.1016/j.corsci.2011.05.051.
• 2. Koushik, B.G., Van den Steen, N., Mamme, M.H., Van Ingelgem, Y. & Terryn, H. (2021). Review on modelling of corrosion under droplet electrolyte for predicting atmospheric corrosion rate. J. Mater. Sci. Technol. 62, 254–267. DOI: 10.1016/j.jmst.2020.04.061.
• 3. Guo, M., Tang, J., Peng, C., Li, X., Wang, C., Pan, C. & Wang, Z. (2022). Effects of salts and its mixing ratio on the corrosion behavior of 316 stainless steel exposed to a simulated salt-lake atmospheric environment. Mater. Chem. Phys. 276, 125380. DOI: 10.1016/j.matchemphys.2021.125380.
• 4. Grum, J. (2007). Comparison of Different Techniques of Laser Surface Hardening. J. Achiev. in Mater. Manufac. Engin. 24(1), 17–25.
• 5. Xiong, Y., He, T., Guo, Z., He, H., Ren, F. & Volinsky, A.A. (2013). Effects of laser shock processing on surface microstructure and mechanical properties of ultrafine-grained high carbon steel. Mater. Sci. Engin: A, 570, 82–86. DOI: 10.1016/j. msea.2013.01.068.
• 6. Judran, A.K., Kadhim, S.M. & Elah, H.A. (2018). Enhancement of the corrosion resistance for 6009 aluminum alloy by laser treatment. Kufa J. Eng. 9, 201–214. DOI: 10.30572/2018/kje/090215.
• 7. Maaß, P. & Peißker, P. (2011). Handbook of hot-dip galvanization (13 Volume). John Wiley & Sons.(Eds.), Corrossion Handbook.
• 8. Khalil, K.S. (2014). Corrosion Inhibition Measurement of Zinc in Acidic Media by Different Techniques. Unpublished M.Sc. Thesis, University of Baghdad, Baghdad, Iraq.
• 9. Davis, J.R. (Ed.). (2001). Surface Engineering For Corrosion And Wear Resistance (1st Ed). USA, ASM international.
• 10. Akchurin, A., Bosman, R., Lugt, P.M. & van Drogen, M. (2016). Analysis of wear particles formed in boundary-lubricated sliding contacts. Tribology letters, 63, 1–14. DOI: 10.1007/s11249-016-0701-z.
• 11. Zhang, L., Zhang, Y.K., Lu, J.Z., Dai, F.Z., Feng, A.X., Luo, K.Y., J.S. Zhong, Q.W., Wang, M. & Qi, H. (2013). Effects of laser shock processing on electrochemical corrosion resistance of ANSI 304 stainless steel weldments after cavitation erosion. J. Corros. Sci. 66, 5–13. DOI: 10.1016/j.corsci.2012.08.034.
• 12. Sakthivel, N. (2018). Analysis of Wear and Corrosion Properties of 316 L Stainless Steel Additively Manufactured Using Laser Engineered Net Shaping, Doctoral Dissertation, Oklahoma State University, USA.
• 13. Yan, X., Wang, F., Deng, L., Zhang, C., Lu, Y., Nastasi, M., & Cui, B. (2018). Effect of laser shock peening on the microstructures and properties of oxide-dispersion-strengthened austenitic steels. Adv. Engin. Mater. 20(3), 1700641. DOI: 10.1002/adem.201700641.
• 14. Pan, X., Gu, Z., Qiu, H., Feng, A. & Li, J. (2022). Study of the mechanical properties and microstructural response with laser shock peening on 40CrMo steel. Metals, 12(6), 1034.
• 15. Lu, J., Qi, H., Luo, K., Luo, M. & Cheng, X. (2014).”Corrosion behaviour of AISI 304 stainless steel subjected to massive laser shock peening impacts with different pulse energies,” Corros. Sci. 80, 53–59. DOI: 10.3390/met12061034.
• 16. Liu, D., Shi, Y., Liu, J. & Wen, L. (2019). Effect of laser shock peening on corrosion resistance of 316L stainless steel laser welded joint. J. Surf. Coat. Technol. 378, 124824. DOI: 10.1016/j.surfcoat.2019.07.048.
• 17. Guan, L., Ye, Z.X., Yang, X.Y., Cai, J.M., Li, Y., Li, Y. & Wang, G. (2021). Pitting resistance of 316 stainless steel after laser shock peening: Determinants of microstructural and mechanical modifications. J. Mater. Proces. Technol. 294, 117091. DOI: 10.1016/j.jmatprotec.2021.117091.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr POPUL/SP/0154/2024/02 w ramach programu "Społeczna odpowiedzialność nauki II" - moduł: Popularyzacja nauki i promocja sportu (2025).