Hyperelastic modelling of rubber with multi-walled carbon nanotubes subjected to tensile loading

• Autorzy: Jweeg M.J. , Alazawi D.A. , Jebur Q.H. , Al-Waily M. , Yasin N.J.

Identyfikatory

DOI

10.5604/01.3001.0016.0027

• Języki publikacji: EN

Abstrakty

EN

Purpose: This study thoroughly examined the application of inverse FE modelling and indentation tensile tests to identify nanotubes' rubber material properties. indentation tensile tests to identify nanotubes' rubber material properties. Design/methodology/approach: Carbon nanotubes with various percentages of multi-walled carbon nanotubes exposed to high tensile stress were used to enhance the mechanical qualities of N.R. rubber. Findings: In this work, carbon nanotubes have been added to natural rubber. By using a solvent casting technique, toluene was used to make nanocomposites. 0.2%, 0.4%, 0.6%, 0.8%, and 1%. In this article, rubber and multi-walled carbon nanotubes interact in practical ways. Mechanical features of carbon nanotubes in NR have been researched. The results will lead to rubber products with improved mechanical qualities compared to present nanocomposite rubber containing various percentages of multi-walled carbon nanotubes exposed to large tensile test loading. The relative fitness error for significant stresses is reasonable with a second or third-order deformation model in numerical results. Research limitations/implications: Non-linear finite element analysis is widely used to optimise complicated elastomeric components' design and reliability studies. However, accurate numerical results cannot be achieved without using rubber or rubber nanocomposite materials with reliable strain energy functions. Practical implications: The indentation tensile tests of rubber samples have been simulated and confirmed using a parametric FE model. An inverse materials parameter identification algorithm was used to calculate the hyperelastic material properties of rubber samples evaluated in uniaxial tensile. Using ABAQUS FE software, material parameters and force-displacement data may be automatically updated and extracted. Originality/value: The numerical data for the inverse method of material property prediction has been successfully established by developing simulation spaces for various material characteristics. The force-displacement curve can be represented using technical methods. The results demonstrate that the inverse FE modelling process might be simplified by using these curve fitting parameters and plot equations to build a mathematical link between curve coefficients and material properties. The first, second, and third-order deformation models were tested using FE simulations for the tensile test.

Słowa kluczowe

EN

rubber nanocomposite materials; rubber characterisation; rubber nanocomposite; strain energy; hyperelastic materials model; rubber modelling

PL

gumowe materiały nanokompozytowe; charakterystyka gumy; nanokompozyt gumowy; energia odkształcenia; model materiałów hiperelastycznych; modelowanie gumy

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2022
• Tom: Vol. 114, nr 2
• Strony: 69--85
• Opis fizyczny: Bibliogr. 75 poz.

Twórcy

autor

Jweeg M.J.

• College of Technical Engineering, Al-Farahidi University, Iraq

autor

Alazawi D.A.

• Department of Mechanical Engineering, College of Engineering, University of Diyala, Iraq

autor

Jebur Q.H.

• Climate Change-Scotland, UK

autor

Al-Waily M.

• Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq

• https://orcid.org/0000-0002-7630-1980

autor

Yasin N.J.

• Engineering Technical College of Baghdad, Middle Technical University, Iraq

Bibliografia

• [1] L. Bokobza, O. Rapoport, Reinforcement of natural rubber, Journal of Applied Polymer Science 85/11 (2002) 2301-2316. DOI: https://doi.org/10.1002/app.10858
• [2] A. Amin, Constitutive Modeling for Strain-Rate Dependency of Natural and High Damping Rubbers, Saitama University, Research Report, Saitama, 2001.
• [3] A. Amin, A. Lion, S. Sekita, Y. Okui, Non-linear dependence of viscosity in modeling the rate-dependent response of natural and high damping rubbers in compression and shear: experimental identification and numerical verification, International Journal of Plasticity 22/9 (2006) 1610-1657. DOI: https://doi.org/10.1016/j.ijplas.2005.09.005
• [4] T.A. Vilgis, G. Heinrich, M. Klüppel, Reinforcement of Polymer Nano-Composites: Theory, Experiments and Applications, Cambridge University Press, Cambridge, 2009. DOI: https://doi.org/10.1017/CBO9780511605314
• [5] F. Laraba-Abbes, P. Ienny, R. Piques, A new 'Tailor-made' methodology for the mechanical behaviour analysis of rubber-like materials: II. Application to the hyperelastic behaviour characterisation of a carbon-black filled natural rubber vulcanizate, Polymer 44/3 (2003) 821-840. DOI: https://doi.org/10.1016/S0032- 3861(02)00719-X
• [6] A. Khodadadi, G. Liaghat, H. Ahmadi, A.R. Bahramian, Y. Anani, O. Razmkhah, S. Asemeni, Numerical and experimental study of impact on hyperelastic rubber panels, Iranian Polymer Journal 28/2 (2019) 113-122. DOI: https://doi.org/10.1007/s13726-018-0682-x
• [7] M. Shahzad, A. Kamran, M.Z. Siddiqui, M. Farhan, Mechanical characterisation and F.E. modelling of a hyperelastic material, Materials Research 18/5 (2015) 918-924. DOI: https://doi.org/10.1590/1516-1439.320414
• [8] L.R.G. Treloar, The elasticity of a network of long-chain molecules ‒ III, Transactions of the Faraday Society 42/1 (1946) 83-94. DOI: https://doi.org/10.1039/TF9464200083
• [9] E.M. Arruda, M.C. Boyce, A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials, Journal of the Mechanics and Physics of Solids 41/2 (1993) 389-412. DOI: https://doi.org/10.1016/0022-5096(93)90013-6
• [10] Y.T. Wei, T.Q. Yang, X.W. Du, The large deformation rubber-like materials: constitutive laws and finite element method, Acta Mechanica Solida Sinica - Chinese Edition 20/4 (1999) 281-289.
• [11] A.N. Gent, A new constitutive relation for rubber, Rubber Chemistry and Technology 69/1 (1996) 59-61. DOI: https://doi.org/10.5254/1.3538357
• [12] M. Al-Waily, I.Q. Al Saffar, S.G. Hussein, M.A. Al- Shammari, Life Enhancement of Partial Removable Denture made by Biomaterials Reinforced by Graphene Nanoplates and Hydroxyapatite with the Aid of Artificial Neural Network, Journal of Mechanical Engineering Research and Developments 43/6 (2020) 269-285.
• [13] M. Al-Waily, M.H. Tolephih, M.J. Jweeg, Fatigue Characterization for Composite Materials used in Artificial Socket Prostheses with the Adding of Nanoparticles, IOP Conference Series: Materials Science and Engineering 928 (2020) 022107. DOI: https://doi.org/10.1088/1757-899X/928/2/022107
• [14] N.D. Fahad, A.A. Kadhim, R.H. Al-Khayat, M. Al- Waily, Effect of SiO2 and Al2O3 hybrid nano materials on fatigue behavior for laminated composite materials used to manufacture artificial socket prostheses, Materials Science Forum 1039 (2021) 493-509. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1039. 493
• [15] M.W. Youjian, Elastomer test used by the hyperelastic material model in finite element analysis, Special Purpose Rubber Product 22/5 (2001) 52-55.
• [16] M. Mooney, A theory of large elastic deformation, Journal of Applied Physics 11/9 (1940) 582-592. DOI: https://doi.org/10.1063/1.1712836
• [17] O.H. Yeoh, Some forms of the strain energy for rubber, Rubber Chemistry and Technology 66/5 (1993) 754– 771. DOI: https://doi.org/10.5254/1.3538343
• [18] L. Mullins, Effect of stretching on the properties of rubber, Rubber Chemistry and Technology 21/2 (1948) 281-300. DOI: https://doi.org/10.5254/1.3546914
• [19] Z.G. Zhang, M.J. Zheng, J.L. Xie, Research on Finite Element Emulation of Temporal Impetus Response on Resilient Wheel, Journal of Beijing Jiaotong University 27/1 (2003) 25-27.
• [20] R.S. Rivlin, D.W. Saunders, Large elastic deformations of isotropic materials VII. Experiments on the deformation of rubber, Philosophical Transactions of the Royal Society A 243/865 (1951) 251-288. DOI: https://doi.org/10.1098/rsta.1951.0004
• [21] A.N. Gent, A.G. Thomas, Forms for the stored (strain) energy function for vulcanised rubber, Journal of Polymer Science 28/118 (1958) 625-628. DOI: https://doi.org/10.1002/pol.1958.1202811814
• [22] L.J. Hart-Smith, Elasticity parameters for finite deformations of rubber-like materials, Journal of Applied Mathematics and Physics (ZAMP) 17 (1966) 608-626. DOI: https://doi.org/10.1007/BF01597242
• [23] K.C. Valanis, R.F. Landel, The strain-energy function of a hyperelastic material in terms of the extension ratios, Journal of Applied Physics 38 (1967) 2997. DOI: https://doi.org/10.1063/1.1710039
• [24] R.W. Ogden, Large deformation isotropic elasticity-on the correlation of theory and experiment for incompressible rubber-like solids, Proceedings of the Royal Society A 326/1567 (1972) 565-584. DOI: https://doi.org/10.1098/rspa.1972.0026
• [25] A.K. Abdulameer, M.A. Al-Shammari, Fatigue Analysis of Syme's Prosthesis, International Review of Mechanical Engineering (IREME) 12/3 (2018) 293- 301. DOI: https://doi.org/10.15866/ireme.v12i3.14390
• [26] J.S. Chiad, M. Al-Waily, M.A. Al-Shammari, Buckling Investigation of Isotropic Composite Plate Reinforced by Different Types of Powders, International Journal of Mechanical Engineering and Technology 9/9 (2018) 305-317.
• [27] S.G. Hussein, M.A. Al-Shammari, A.M. Takhakh, M. Al-Waily, Effect of Heat Treatment on Mechanical and Vibration Properties for 6061 and 2024 Aluminum Alloys, Journal of Mechanical Engineering Research and Developments 43/1 (2020) 48-66.
• [28] E.N. Abbas, M.J. Jweeg, M. Al-Waily, Fatigue Characterization of Laminated Composites used in Prosthetic Sockets Manufacturing, Journal of Mechanical Engineering Research and Developments 43/5 (2020) 384-399.
• [29] F.M. Kadhim, A.M. Takhakh, J.S. Chiad, Modeling and Evaluation of Smart Economic Transfemral Prosthetic, Defect and Diffusion Forum 398 (2020) 48- 53. DOI: https://doi.org/10.4028/www.scientific.net/DDF.398.4 8 [30] M. Al-Waily, M.A. Al-Shammari, M.J. Jweeg, An Analytical Investigation of Thermal Buckling Behavior of Composite Plates Reinforced by Carbon Nano Particles, Engineering Journal 24/3 (2020) 11-21. DOI: https://doi.org/10.4186/ej.2020.24.3.11
• [31] A.H. Jeryo, J.S. Chiad, W.S. Abbod, Boosting Mechanical Properties of Orthoses-Foot Ankle by Adding Carbon Nanotube Particles, Materials Science Forum 1039 (2021) 518-536. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1039. 518
• [32] M.A. Al-Shammari, M. Al-Waily, Theoretical and Numerical Vibration Investigation Study of Orthotropic Hyper Composite Plate Structure, International Journal of Mechanical and Mechatronics Engineering 14/6 (2014) 1-21.
• [33] S.M. Abbas, A.M. Takhakh, M.A. Al-Shammari, M. Al-Waily, Manufacturing and Analysis of Ankle Disarticulation Prosthetic Socket (SYMES), International Journal of Mechanical Engineering and Technology 9/7 (2018) 560-569.
• [34] E.E. Kader, A.M. Abed, M.A. Al-Shammari, Al2O3 Reinforcement Effect on Structural Properties of Epoxy Polysulfide Copolymer, Journal of Mechanical Engineering Research and Developments 43/4 (2020) 320-328.
• [35] S.A. Mechi, M. Al-Waily, Impact and Mechanical Properties Modifying for Below Knee Prosthesis Socket Laminations by using Natural Kenaf Fiber, Journal of Physics: Conference Series 1973 (2021) 012168. DOI: https://doi.org/10.1088/1742-6596/1973/1/012168
• [36] M. Al-Waily, A.M. Jaafar, Energy balance modelling of high velocity impact effect on composite plate structures, Archives of Materials Science and Engineering 111/1 (2021) 14-33. DOI: https://doi.org/10.5604/01.3001.0015.5562
• [37] A.M. Obaid, J.S. Chiad, G.Sh. Sadiq, Incremental Forming of AA8006 Aluminum Alloys Sheet with Different Step Size, Materials Science Forum 1039 (2021) 137-143. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1039. 137
• [38] S.A. Mechi, M. Al-Waily, A. Al-Khatat, The Mechanical Properties of the Lower Limb Socket Material Using Natural Fibers: A Review, Materials Science Forum 1039 (2021) 473-492. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1039. 473
• [39] E.K. Njim, S.H. Bakhy, M. Al-Waily, Analytical and Numerical Investigation of Free Vibration Behavior for Sandwich Plate with Functionally Graded Porous Metal Core, Pertanika Journal of Science and Technology 29/3 (2021) 1655-1682. DOI: https://doi.org/10.47836/pjst.29.3.39
• [40] M.A. Al-Shammari, M. Al-Waily, Analytical Investigation of Buckling Behavior of Honeycombs Sandwich Combined Plate Structure, International Journal of Mechanical and Production Engineering Research and Development 8/4 (2018) 803-818. DOI: https://doi.org/10.24247/ijmperdaug201883
• [41] E.N. Abbas, M. Al-Waily, T.M. Hammza, M.J. Jweeg, An investigation to the effects of impact strength on laminated notched composites used in prosthetic sockets manufacturing, IOP Conference Series: Materials Science and Engineering 928 (2020) 022081. DOI: https://doi.org/10.1088/1757-899X/928/2/022081
• [42] E.K. Njim, S.H. Bakhy, M. Al-Waily, Analytical and numerical free vibration analysis of porous functionally graded materials (FGPMs) sandwich plate using Rayleigh-Ritz method, Archives of Materials Science and Engineering 110/1 (2021) 27-41. DOI: https://doi.org/10.5604/01.3001.0015.3593
• [43] A.A. Kadhim, E.A. Abbod, A.K. Muhammad, K.K. Resan, M. Al-Waily, Manufacturing and Analyzing of a New Prosthetic Shank with Adapters by 3D Printer, Journal of Mechanical Engineering Research and Developments 44/3 (2021) 383-391.
• [44] M. Al-Waily, M.J. Jweeg, M.A. Al-Shammari, K.K. Resan, A.M. Takhakh, Improvement of Buckling Behavior of Composite Plates Reinforced with Hybrids Nanomaterials Additives, Materials Science Forum 1039 (2021) 23-41. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1039. 23
• [45] M.A. Al-Shammari, S.E. Abdullah, Stiffness to Weight Ratio of Various Mechanical and Thermal Loaded Hyper Composite Plate Structures, IOP Conference Series: Materials Science and Engineering 433 (2018) 012051. DOI: https://doi.org/10.1088/1757-899X/433/1/012051
• [46] Y.A. Shafeeq, J.S. Chiad, Y.Y. Kahtan, Study, analysis, the vibration and stability for the artificial hand during its daily working, International Journal of Mechanical Engineering and Technology 9/13 (2018) 1706-1716.
• [47] M.A. Al-Shammari, Q.H. Bader, M. Al-Waily, A.M. Hasson, Fatigue Behavior of Steel Beam Coated with Nanoparticles under High Temperature, Journal of Mechanical Engineering Research and Developments 43/4 (2020) 287-298. [48] S.H. Bakhy, M. Al-Waily, M.A. Al-Shammari, Analytical and numerical investigation of the free vibration of functionally graded materials sandwich beams, Archives of Materials Science and Engineering 110/2 (2021) 72-85. DOI: https://doi.org/10.5604/01.3001.0015.4314
• [49] M.J. Jweeg, K.I. Mohammed, M.H. Tolephih, M. Al- Waily, Investigation into the Distribution of Erosion- Corrosion in the Furnace Tubes of Oil Refineries, Materials Science Forum 1039 (2021) 165-181. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1039. 165
• [50] F.T. Al-Maliky, J.S. Chiad, Study and evaluation of four bar polycentric knee used in the prosthetic limb for transfemoral amputee during the gait cycle, Materials Today: Proceedings 42/5 (2021) 2706-2712. DOI: https://doi.org/10.1016/j.matpr.2020.12.709
• [51] M.A. Al-Shammari, Experimental and FEA of the Crack Effects in a Vibrated Sandwich Plate, Journal of Engineering and Applied Sciences 13/17 (2018) 7395- 7400.
• [52] M.A. Husain, M.A. Al-Shammari, Analytical Solution of Free Vibration Characteristics of Partially Circumferential Cracked Cylindrical Shell, Journal of Mechanical Engineering Research and Developments 43/3 (2020) 442-454.
• [53] E.K. Njim, S.H. Bakhy, M. Al-Waily, Optimisation Design of Functionally Graded Sandwich Plate with Porous Metal Core for Buckling Characterisations, Pertanika Journal of Science and Technology 29/4 (2021) 3113-3141. DOI: https://doi.org/10.47836/pjst.29.4.47
• [54] E.K. Njim, S.H. Bakhy, M. Al-Waily, Analytical and Numerical Investigation of Buckling Behavior of Functionally Graded Sandwich Plate with Porous Core, Journal of Applied Science and Engineering 25/2 (2022) 339-347. DOI: https://doi.org/10.6180/jase.202204_25(2).0010
• [55] Q.H. Jebur, M.J. Jweeg, M. Al-Waily, H.Y. Ahmad, K.K. Resan, Hyperelastic models for the description and simulation of rubber subjected to large tensile loading, Archives of Materials Science and Engineering 108/2 (2021) 75-85. DOI: https://doi.org/10.5604/01.3001.0015.0256
• [56] Q.H. Jebur, M.J. Jweeg, M. Al-Waily, Ogden model for characterising and simulation of PPHR rubber under different strain rates, Australian Journal of Mechanical Engineering (2021) (published online). DOI: https://doi.org/10.1080/14484846.2021.1918375
• [57] Q.H. Jebur, P. Harrison, Z. Guo, G. Schubert, X. Ju, V. Navez, Characterisation and modelling of a transversely isotropic melt-extruded low-density polyethylene closed cell foam under uniaxial compression, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226/9 (2012) 2168-2177. DOI: https://doi.org/10.1177/0954406211431528
• [58] Q.H. Jebur, P. Harrrison, Z. Guo, G. Schubert, V. Navez, Characterisation and modelling of a melt-extruded LDPE closed cell foam, Applied Mechanics and Materials 70 (2011) 105-110. DOI: https://doi.org/10.4028/www.scientific.net/AMM.70.1 05
• [59] R.W. Ogden, G. Saccomandi, I. Sgura, Fitting hyperelastic models to experimental data, Computational Mechanics 34 (2004) 484-502. DOI: https://doi.org/10.1007/s00466-004-0593-y
• [60] J.L. Ericksen, R.S. Rivlin, Large Elastic Deformations of Homogeneous Anisotropic Materials, Journal of Rational Mechanics and Analysis 3/3 (1954) 281-301.
• [61] L.E. Crocker, B.C. Duncan, J.M. Urquhart, R.G. Hughes, A. Olusanya, The application of rubber material models to analyse flexible adhesive joints, National Physical Laboratory, Teddington, 2011.
• [62] I.D. Breslavsky, M. Amabili, M. Legrand, Nonlinear vibrations of thin hyperelastic plates, Journal of Sound and Vibration 333/19 (2014) 4668-4681. DOI: https://doi.org/10.1016/j.jsv.2014.04.028
• [63] F. Renaud, J.L. Dion, G. Chevallier, I. Tawfiq, R. Lemaire, A new identification method of viscoelastic behaviour: Application to the generalised Maxwell model, Mechanical Systems and Signal Processing 25/3 (2011) 991-1010. DOI: https://doi.org/10.1016/j.ymssp.2010.09.002
• [64] M.M. Abdulridha, N.D. Fahad, M. Al-Waily, K.K. Resan, Rubber Creep Behavior Investigation with Multi-Wall Tube Carbon Nano Particle Material Effect, International Journal of Mechanical Engineering and Technology 9/12 (2018) 729-746.
• [65] M. Al-Baghdadi, M.J. Jweeg, M. Al-Waily, Analytical and Numerical Investigations of Mechanical Vibration in the Vertical Direction of a Human Body in a Driving Vehicle using Biomechanical Vibration Model, Pertanika Journal of Science & Technology 29/4 (2021) 2791-2810. DOI: https://doi.org/10.47836/pjst.29.4.30
• [66] T.S.N. Aswad, M.A.R.S. Al-Baghdadi, M. Al-Waily, M.A.B. Razali, Performance Enhancement of a Photovoltaic Cell Working in Hot Environment Conditions using Al2O3 Nanofluids: A CFD Study, International Journal of Nanoelectronics and Materials 14/4 (2021) 317-328.
• [67] E.K. Njim, S.H. Bakhy, M. Al-Waily, Free vibration analysis of imperfect functionally graded sandwich plates: analytical and experimental investigation, Archives of Materials Science and Engineering 111/2 (2021) 49-65. DOI: https://doi.org/10.5604/01.3001.0015.5805
• [68] M.J. Jweeg, Z.Kh. Hamdan, A.H. Majeed, K.K. Resan, M. Al-Waily, A new method for measurement the residual stresses in friction stir welding, Archives of DOI: https://doi.org/10.5604/01.3001.0015.6287
• [69] M.A. Al-Shammari, M.A. Husain, M. Al-Waily, Free Vibration Analysis of Rectangular Plates with Cracked Holes, AIP Conference Proceedings 2386 (2022) 040023. DOI: https://doi.org/10.1063/5.0066908
• [70] E.K. Njim, S.H. Bakhy, M. Al-Waily, Analytical and numerical flexural properties of polymeric porous functionally graded (PFGM) sandwich beams, Journal of Achievements in Materials and Manufacturing Engineering 110/1 (2022) 5-15. DOI: https://doi.org/10.5604/01.3001.0015.7026
• [71] S.M.J. Haider, A.M. Takhakh, M. Al-Waily, A Review Study on Measurement and Evaluation of Prosthesis Testing Platform during Gait Cycle within Sagittal Plane, 14th International Conference on Developments in eSystems Engineering “DeSE”, Sharjah, United Arab Emirates, 2021, 223-228. DOI: https://doi.org/10.1109/DeSE54285.2021.9719575
• [72] S.M.J. Haider, A.M. Takhakh, M. Al-Waily, Y. Saadi, Simulation of gait cycle in sagittal plane for above-knee prosthesis, AIP Conference Proceedings 2386 (2022) 040002. DOI: https://doi.org/10.1063/5.0066819
• [73] Z.A.A. Abud Ali, A.M. Takhakh, M. Al-Waily, A review of use of nanoparticle additives in lubricants to improve its tribological properties, Materials Today: Proceedings 52/3 (2022) 1442-1450. DOI: https://doi.org/10.1016/j.matpr.2021.11.193
• [74] R.H. Al-Khayat, A.A. Kadhim, M.A.R.S. Al-Baghdadi, M. Al-Waily, Flow parameters effect on water hammer stability in hydraulic system by using state-space method, Open Engineering 12/1 (2022) 215-226. DOI: https://doi.org/10.1515/eng-2022-0014
• [75] R.H. Al-Khayat, A.W.A. Al-Fatlawi, M.A.R.S. Al- Baghdadi, M. Al-Waily, Water hammer phenomenon in pumping stations: A stability investigation based on root locus, Open Engineering 12/1 (2022) 254-262. DOI: https://doi.org/10.1515/eng-2022-0029

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).