Chip arrangement in the dry cutting of aluminium alloys

• Autorzy: Rubio E. M. , Camacho A. M. , Sánchez-Sola J. M. , Marcos M.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of the research is make a first analysis of the chip formed in the dry turning process of AA2024 (Al-Cu) and AA7050 (Al-Zn) aluminium alloys. Design/methodology/approach: The methodology has consisted of proving a series of parameters combinations: feed rate, f, cutting speed, v, and depth of cut, d, and of analysing the different types of chip appeared during each one of them. Findings: A single classification, specific for the studied alloys, has been proposed. This classification has been built in a similar way to those recorded in ISO 3685 standards. As a result, it has been able to realise that a direct correspondence with that standards does not exist. Besides, the relationship between chip arrangement and workpiece surface finish has been studied through the comparison between chip form and Ra parameter for different cutting conditions. Research limitations/implications: A possible future work is the development of a general standard, like ISO 3685, for the rest of the aluminium alloys. Practical implications: The relationship found between chip arrangement and workpiece surface finish has an important practical implication since it allows selecting the best cutting condition combination from the points of view both the security and the economy for the established requirements in each case. Originality/value: The paper is original since the bibliographical review has allowed testing that, although works about these themes exist, none approaches the problem like it has been made in this work.

Słowa kluczowe

EN

manufacturing; processing; machining; dry turning; chip arrangement; aluminium alloys

PL

produkcja; przetwarzanie; obróbka skrawaniem; toczenie na sucho; wiór; stopy aluminium

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2006
• Tom: Vol. 16, nr 1-2
• Strony: 164--170
• Opis fizyczny: Bibliogr. 31 poz., rys., tab., wykr.

Twórcy

autor

Rubio E. M.

• Division of Manufacturing Engineering, National Distance University of Spain (UNED), Juan del Rosal 12, 28040, Madrid, Spain

autor

Camacho A. M.

• Division of Manufacturing Engineering, National Distance University of Spain (UNED), Juan del Rosal 12, 28040, Madrid, Spain

autor

Sánchez-Sola J. M.

• Division of the Mechanical Engineering and Industrial Design, University of Cadiz, c/ Chile s/n, E-11003, Cádiz, Spain

autor

Marcos M.

• Division of the Mechanical Engineering and Industrial Design, University of Cadiz, c/ Chile s/n, E-11003, Cádiz, Spain

Bibliografia

• [1] A. Barbacki, M. Kawalec, and A. Hamrol, J. Mat. Proc. Tech., 133 (1-2) (2003) 21-25.
• [2] B. Mursec, and F. Cus, J. Mat. Proc. Tech., 133 (1-2) (2003) 158-165.
• [3] C.H. Che-Jaron, J. Mat. Proc. Tech., 118 (2001) 231-237.
• [4] E.M. Rubio, A.M. Camacho, J.M. Sánchez, M. Marcos, Proc XV Invema, San Sebastián (Spain), (2004) 613-625.
• [5] E.M. Rubio, A.M. Camacho, J.M. Sánchez-Sola and M.Marcos, J. Mat. Proc. Tech., 162-163C (2005) 682-689.
• [6] E.M. Rubio, O. Akourri, A.M. Camacho, J.M. Sánchez and M. Marcos, Proc. VIII Congreso Nacional de Materiales, Valencia (SPAIN), (2004) 1479-1486.
• [7] F. Xie, X. Yan, L. Ding, F. Zhang, S. Chen, M.G. Chu and Y.A. Chang, Mat. Sci. Eng. A-Struct 355 (2003) 144–153.
• [8] G. Mrówka-Nowotnik, and J. Sieniawski, J. Mat. Proc. Tech. 162-163 (2005), 367-372.
• [9] G.E. D'Errico, J. Mat. Proc. Tech. 78 (1-3) (1998) 43-47.
• [10] G.E. D'Errico, and E. Guglielmi, J. Mat. Proc. Tech. 78 (1-3) (1998) 48-52
• [11] G.E. D'Errico, R. Calzavarini, and B. Vicenzi, J. Mat. Proc. Tech. 78 (1-3) (1998) 53-58.
• [12] H. Hanyu, S. Kamiya, Y. Murakami and M. Saka, Sur. Coat. Tech. 174-175 (2003) 992-995.
• [13] ISO 3685:1993, Tool-life testing with single-point turning tools, 1993.
• [14] ISO 4288:1998, Geometrical product specifications (GPS).
• [15] Surface texture: profile method. Rules and procedures for the assessment of surface texture, 1998.
• [16] J.D. Robson, Mat. Sci. Eng. A-Struct 382 (2004) 112–121.
• [17] J.F. Kelly and M.G. Cotterell, J. Mat. Proc. Tech. 120 (1-3) (2002) 327-334.
• [18] J.M. Sánchez, E.M. Rubio, M. Álvarez, M.A. Sebastián and M. Marcos, J. Mat. Proc. Tech. 164-165C (2005) 911-918.
• [19] J.M. Sánchez, M. Álvarez, M.S. Carrilero, J.M. González and M. Marcos, An. Ing. Mec. (2003) 2819-2824.
• [20] J.M. Sánchez-Sola, M.A. Sebastián, E.M. Rubio, M. Sánchez-Carrilero, amd M. Marcos, Proc. VIII Congreso Nacional de Materiales, Valencia (Spain), (2004) 1475-1478.
• [21] J.M. Sánchez-Sola, Ph.D., UNED, Madrid (Spain), 2004.
• [22] J.R. Ferreira, N.L. Coppini, and F.N. Levy, J. Mat. Proc. Tech. 109 (1-2) (2001) 65-71.
• [23] J.Z. Gronostajski, J.W. Kaczmar, H. Marciniak and A. Matuszak, J. Mat. Proc. Tech. 64 (1-3) (1997) 149-156.
• [24] K.A. Abou-El-Hossein and Z. Yahya, J. Mat. Proc. Tech. 162-163 (2005), 596-602.
• [25] L.A. Dobrzanski, and M. Adamiak, J. Mat. Proc. Tech. 133 (1-2) (2003) 50-62.
• [26] L.N. López de Lacalle, J. Pérez, J.I. Llorente and J.A. Sánchez, J. Mat. Proc. Tech. 100 (2000) 1-11.
• [27] M. Marcos, J.M. Sánchez, M. Sánchez, M.A. Sebastián, E. Rubio, Proc. 1st Man. Eng. Soc. Int. Conf., Calatayud (Spain), (2005).
• [28] M. Marcos, M. Alvarez, J.R. Astorga, M.J. Cano, M.S. Carrilero, Proc. 1st Man. Eng. Soc. Int. Conf., Calatayud (Spain), (2005).
• [29] M. Nouari, G. List, F. Girot and D.Coupard, Wear 255 (7-12) (2003) 1359-1368.
• [30] M. Sanchez-Carrilero and M. Marcos, Relaciones Paramétricas en el Mecanizado, Serv. de Pub. University of Cadiz, Cadiz (Spain), 1994.
• [31] M.A. Sebastián, J.M. Sánchez, E.M. Rubio, M.S. Carrilero, J.E. Díaz and M. Marcos, Proceedings of the 14th Int. DAAAM Symposium. Intelligent Manufacturing & Automation focus on reconstruction and development, Viena, (2003) 125-126.