Production of Melt-Spun Al-20Si-5Fe Alloy and Boron Carbide (B4C) Composite Material

• Autorzy: Kilicaslan M. F. , Uzun A. , Karakose E.

Identyfikatory

DOI

10.24425/122382

• Języki publikacji: EN

Abstrakty

EN

In this study, metal matrix composite materials containing melt-spun Al-20Si-5Fe alloys and boron carbide was produced by high energy ball milling and then hot pressing at 200 MPa pressure and 450°C. Mechanical and microstructural characterizations were performed by using an optical microscopy, X-Ray diffractometer, and dynamic microhardness tester. It was observed that boron carbide particles were homogenously distributed in the microstructure and values of microhardness and elastic modules were averagely 830 MPa and 42 GPa, respectively.

Słowa kluczowe

EN

metal matrix composite; rapid solidification; Al-Si alloys

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 2
• Strony: 597--600
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Kilicaslan M. F.

• Kastamonu University, Department of Materials Science and Nanotechnology Engineering, Kastamonu, Turkey

autor

Uzun A.

• Kastamonu University, Department of Mechanical Engineering, Kastamonu, Turkey

autor

Karakose E.

• Erciyes University, Kayseri Vocational School, Department of Automotive Technology, 38039 Kayseri, Turkey

Bibliografia

• [1] L. G. Hou, C. Cui, J. S. Zhang, Mater. Sci. Eng. A 527, 6400-6412 (2010).
• [2] M. Rajabi, A. Simchi, M. Vahidi, P. Davami, J. Alloy Compd. 466, 111-118 (2008).
• [3] Q. Li, T. Xia, Y. Lan, P. Li, L. Fan, Mater. Sci. Eng. A 588, 97-102 (2013).
• [4] D. M. Goudar, K. Raju, V. C Srivastava, G. B. Rudrakshi, Mater. Des. 51, 383-390 (2013).
• [5] M. F. Kilicaslan, W. R. Lee, T. H. Lee, Y. Sohn, S. J. Hong, Mater. Lett. 71, 164-167 (2012).
• [6] D. M. Goudar, G. B. Rudrakshi, V. C. Srivastava, J. Reddy, A. G. Joshi, Int. J. Sci. Eng. Res. 2 (6) (2011).
• [7] U. Kolemen, J. Alloy Compd. 425, 429-435 (2006).
• [8] O. Sahin, O. Uzun, S.-L. Małgorzata, H. Gocmez, U. Kolemen, J. Eur. Ceram. Soc. 28, 1235-1242 (2008).
• [9] W. C. Oliver, G. M. Pharr, J. Mater. Res. 7 (6), 1564-1583 (1992).
• [10] M. F. Kilicaslan, O. Uzun, F. Yilmaz, S. Caglar, Metall. Mater. Trans. B 45b, 1865 (2014).
• [11] Y. L. Zhou, M. Niinomi, Mater. Trans. 50, 368-372 (2009).
• [12] O. Şahin, O. Uzun, U. Kölemen, N. Uçar, Mater. Charac. 59, 427-434 (2008).
• [13] O. Uzun, U. Kölemen, S. Çelebi, N. Güçlü, J. Eur. Ceram. Soc. 25, 969-977 (2005).

Uwagi

EN

This work was supported by Kastamonu Universitesi Bilimsel Arastirma Projeleri Yonetimi Koordinatorlugu [KÜBAP-05 / 2014-01].

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).