Powiadomienia systemowe
- Sesja wygasła!
Identyfikatory
DOI
Warianty tytułu
Języki publikacji
Abstrakty
In this study, metal matrix composite materials containing melt-spun Al-20Si-5Fe alloys and boron carbide was produced by high energy ball milling and then hot pressing at 200 MPa pressure and 450°C. Mechanical and microstructural characterizations were performed by using an optical microscopy, X-Ray diffractometer, and dynamic microhardness tester. It was observed that boron carbide particles were homogenously distributed in the microstructure and values of microhardness and elastic modules were averagely 830 MPa and 42 GPa, respectively.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
597--600
Opis fizyczny
Bibliogr. 13 poz., rys.
Twórcy
autor
- Kastamonu University, Department of Materials Science and Nanotechnology Engineering, Kastamonu, Turkey
autor
- Kastamonu University, Department of Mechanical Engineering, Kastamonu, Turkey
autor
- Erciyes University, Kayseri Vocational School, Department of Automotive Technology, 38039 Kayseri, Turkey
Bibliografia
- [1] L. G. Hou, C. Cui, J. S. Zhang, Mater. Sci. Eng. A 527, 6400-6412 (2010).
- [2] M. Rajabi, A. Simchi, M. Vahidi, P. Davami, J. Alloy Compd. 466, 111-118 (2008).
- [3] Q. Li, T. Xia, Y. Lan, P. Li, L. Fan, Mater. Sci. Eng. A 588, 97-102 (2013).
- [4] D. M. Goudar, K. Raju, V. C Srivastava, G. B. Rudrakshi, Mater. Des. 51, 383-390 (2013).
- [5] M. F. Kilicaslan, W. R. Lee, T. H. Lee, Y. Sohn, S. J. Hong, Mater. Lett. 71, 164-167 (2012).
- [6] D. M. Goudar, G. B. Rudrakshi, V. C. Srivastava, J. Reddy, A. G. Joshi, Int. J. Sci. Eng. Res. 2 (6) (2011).
- [7] U. Kolemen, J. Alloy Compd. 425, 429-435 (2006).
- [8] O. Sahin, O. Uzun, S.-L. Małgorzata, H. Gocmez, U. Kolemen, J. Eur. Ceram. Soc. 28, 1235-1242 (2008).
- [9] W. C. Oliver, G. M. Pharr, J. Mater. Res. 7 (6), 1564-1583 (1992).
- [10] M. F. Kilicaslan, O. Uzun, F. Yilmaz, S. Caglar, Metall. Mater. Trans. B 45b, 1865 (2014).
- [11] Y. L. Zhou, M. Niinomi, Mater. Trans. 50, 368-372 (2009).
- [12] O. Şahin, O. Uzun, U. Kölemen, N. Uçar, Mater. Charac. 59, 427-434 (2008).
- [13] O. Uzun, U. Kölemen, S. Çelebi, N. Güçlü, J. Eur. Ceram. Soc. 25, 969-977 (2005).
Uwagi
EN
This work was supported by Kastamonu Universitesi Bilimsel Arastirma Projeleri Yonetimi Koordinatorlugu [KÜBAP-05 / 2014-01].
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-06e38f4e-a9a8-43d8-80c1-c86354e64e6e