Coupled electrical circuit method calculation with 3MA eddy current application for metal investigation

• Autorzy: Ahmed Katia Sidi , Maouche Bachir , Gabi Yasmine , Wolter Bernd , Straß Benjamin

Identyfikatory

DOI

10.15199/48.2022.03.15

Warianty tytułu

PL

Obliczanie metody sprzężonego obwodu elektrycznego z zastosowaniem prądów wirowych 3MA do badania metali

• Języki publikacji: EN

Abstrakty

EN

This paper highlights the robustness of the semi analytical computation so-called ‘coupled circuit’ method for the simulation of the eddy current method integrated in the commercial non-destructive testing, 3MA equipment. For this purpose, semi-analytical development are carried out for calculation of voltage around eddy current- receiver coil, taking into account the skin depth of the sample. The challenge in the following is to reproduce the eddy current 3MA measuring quantities on conductive and ferromagnetic materials under several inspection situation. Furthermore, eddy current parameters will be underlined in impedance diagram varying the frequency and lift-off.

PL

W artykule podkreślono niezawodność półanalitycznych obliczeń, tak zwanej metody „obwodów sprzężonych”, do symulacji metody prądów wirowych zintegrowanej z komercyjnymi badaniami nieniszczącymi, sprzęt 3MA. W tym celu przeprowadza się półanalityczne opracowanie obliczania napięcia wokół cewki odbiorczej prądu wirowego z uwzględnieniem głębokości naskórka próbki. Wyzwaniem w dalszej części jest odtworzenie wielkości pomiarowych prądów wirowych 3MA na materiałach przewodzących i ferromagnetycznych w kilku sytuacjach kontrolnych. Ponadto parametry prądów wirowych zostaną podkreślone na wykresie impedancji, zmieniając częstotliwość i oderwanie.

Słowa kluczowe

EN

semi analytical calculation; skin depth; 3MA NDT system; eddy current material; characterization

PL

metoda prądów wirowych; system 3MA; badanie metali

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2022
• Tom: R. 98, nr 3
• Strony: 64--68
• Opis fizyczny: Bibliogr. 17 poz., il., rys., tab.

Twórcy

autor

Ahmed Katia Sidi

• Department of Electrotechnics, Mouloud Mammeri University of Tizi-Ouzou, BP 17RP 15000, Algeria

• https://orcid.org/0000-0001-5688-0404

autor

Maouche Bachir

• Department of Electrotechnics, A. Mira University, 06000 Béjaia, Algeria

• https://orcid.org/0000-0003-2567-9614

autor

Gabi Yasmine

• Fraunhofer Institute for Nondestructive Testing - IZFP, Saarbrücken, Germany

• https://orcid.org/0000-0002-6148-4008

autor

Wolter Bernd

• Fraunhofer Institute for Nondestructive Testing - IZFP, Saarbrücken, Germany

• https://orcid.org/0000-0003-0595-2847

autor

Straß Benjamin

• Fraunhofer Institute for Nondestructive Testing - IZFP, Saarbrücken, Germany

• https://orcid.org/0000-0002-1657-2164

Bibliografia

• [1] Meilland P., Marmulev A., Wolter B., Conrad C., Hofmann U., Dussaulx J., Weber W., European Commission. Combined Ultrasound and Micromagnetic Measurements for Non- Destructive Assessment of Textured Heavy Plate Properties PLATEND). Final Report, Research Fund for Coal and Steel, Project ID: RFSR-CT-2005-00044, 2005-07-01 to 2008-06-30; Publications Office of the European Communities, Luxemburg, 2010
• [2] Alpeter I ., Nondestructive Evaluation of Cementite Content in Steel and White Cast Iron Using Inductive Barkhausen Noise. J. Nondestr. Eval. 1996, 15 (2), 45-60
• [3] Dobmann G., Pitsch H., Magnetic tangential field-strength- inspection, a further ndt-tool for 3MA. In Proceedings of the „3rd International Symposium on Nondestructive Characterization of Materials“, Saarbrücken, Germany, October 3–6, 1988; pp. 636-643.
• [4] Wolter B., Theiner W.A., Kern R., Becker R., Rodner C., Kreier P ., Ackeret P ., Detection and Quantification of Grinding Damage by Using EC and 3MA Techniques. In Proceedings of the “ICBM4 - 4th International Conference on Barkhausen Noise and Micromagnetic Testing”, Brescia, Italy, July 3-4, 2003; Stresstech Oy: Vaajakoski, Finland, 2003; pp. 159-170
• [5] Pasadas Dario J., Ramos Helena G., and Ribeiro Artur L., Detection of Sub-Surface Cracks Using ECT with Planar Excitation Coil, GMR and TMR Sensors”Studies in Applied Electromagnetics and Mechanics, vol. 44, pp. 26–31, 2019.
• [6] Pingjie Huang, Guangxin Zhang, Zhaotong Wu, Jinhui Cai, Zekui Zhou, “Inspection of defects in conductive multilayered structures by an eddy current scanning technique: Simulation and experiments” NDT & E International, 2006, pp. 578–584.
• [7] Dodd CV, Deeds WE. Analytical solutions to eddy-current probe-coil probe problems. J. Appl. Phys. 1968; 39: 2829– 2839
• [8] Maouche B., Etude et développement semi - analytique de l’équation de diffusion électromagnétique avec terme de déplacement dans le cas de dispositif axisymétrique excites en courant ou en tension. PHD thesis on electrical engineering, University of Bejaia, 1996.
• [9] Gabi Y., Böttger D., Straß B., Wolter B., Conrad C., Leinenbach F., Local Electromagnetic Investigations on Electrical Steel FeSi 3% via 3MA Micromagnetic NDT System. In Proc.s of the “12th European Conference on Non-destructive Testing, ECNDT 2018”, June 11–15, 2018, Gothenburg, Sweden; Swedish NDT Society: Gothenburg, Sweden, 2018; Paper ID-ECNDT-0500-2018
• [10] M. Chelabi, T. Hacib, Y. Le Bihan, N. Ikhlef, H. Boughedda, and M. R. Mekideche, “Eddy current characterization of small cracks using least square support vector machine” Journal of Physics D: Applied Physics, vol. 49, no. 15, p. 155303, 2016.
• [11] Maouche B., Feliachi M., A half analytical formulation for the impedance variation in axisymmetrical modeling of eddy current non-destructive testing, Eur. Phys. J. Appl. Phys. 33, 59–67 (2006)
• [12] Maouche B., Feliachi M., Analyse de l’effet des courants induits sur l’impedance d’un système electromagnetique alimenté en tension BF ou HF-Utilisation de la méthode des circuits electriques couplés, J Phys III, France 1997,1967-73
• [13] Maouche B., Alkama R., Feliachi M., Semi-analytical Calculation of the Impedance of a Differential Sensor for Eddy current Non-Destructive Testing, NDT& E International,42 (2009), N°7, pp. 573-580
• [14] Bouzidi A., Maouche B., Feliachi M., Berthiau G., Pulsed eddy Current non Destructive Evaluation Based on coupled Electromagnetic Quantities, The European Physical Journal: Applied Physics, 57 (2012), pp. 1-9.
• [15] Zerguini S., Maouche B., Latreche M., Feliachi M., A coupled fictitious electric circuit’s method for impedance of a sensor with ferromagnetic core calculation. Application to eddy currents non destructive testing, Eur. Phys. J. Appl. Phys, 48, 31202 (2009)
• [16] Höller, P. Nondestructive analysis of structure and stresses by ultrasonic and micromagnetic methods. In Nondestructive C Characterization of Materials II; Green, R.E., Kozaczek, K.J., Ruud, C., Eds.; Springer: Boston, MA, USA, 1987; pp. 211–212
• [17] Altpeter I., Dobmann G., Theiner W., A Quantitative hardening-depth-measurements up to 4 mm by means of micromagnetic microstructure multiparameter analysis -3MA. Review of Progress in Quantitative Nondestructive Evaluation 1987, 7B, 1471-1475