PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Dissolution of Metal Supported Spent Auto Catalysts in Acids

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Metal supported auto catalysts, have been used in sports and racing cars initially, but nowadays their application systematically increases. In Metal Substrate (supported) Converters (MSC), catalytic functions are performed by the Platinum Group Metals (PGM): Pt, Pd, Rh, similarly to the catalysts on ceramic carriers. The contents of these metals make that spent catalytic converters are valuable source of precious metals. All over the world there are many methods for the metals recovery from the ceramic carriers, however, the issue of platinum recovery from metal supported catalysts has not been studied sufficiently yet. The paper presents preliminary results of dissolution of spent automotive catalyst on a metal carrier by means of acids: H2SO4, HCl, HNO3, H3PO4. The main assumption of the research was the dissolution of base metals (Fe, Cr, Al) from metallic carrier of catalyst, avoiding dissolution of PGMs. Dissolution was the most effective when concentrated hydrochloric acid, and 2M sulfuric acid (VI) was used. It was observed that the dust, remaining after leaching, contained platinum in the level of 0.8% and 0.7%, respectively.
Twórcy
  • Silesian University of Technology, Institute of Metals Technology, 8 Krasinskiego Str., 40-019 Katowice, Poland
  • Silesian University of Technology, Institute of Metals Technology, 8 Krasinskiego Str., 40-019 Katowice, Poland
autor
  • Silesian University of Technology, Institute of Metals Technology, 8 Krasinskiego Str., 40-019 Katowice, Poland
autor
  • University of Kosice, Institute of Biology and Ecology, Department of Microbiology, 2 Srobarova str., 04-180 Kosice, Slovakia
  • Technical University in Kosice, Department of Materials Science, 1/9 Letna Str., Kosice, Slovakia
  • Technical University in Kosice, Department of Materials Science, 1/9 Letna Str., Kosice, Slovakia
  • Technical University in Kosice, Department of Materials Science, 1/9 Letna Str., Kosice, Slovakia
Bibliografia
  • [1] Jin. S. Yoo, Catalysis Today 44, 1-4, 27-46 (1998).
  • [2] M. Zabochnicka-Swiatek, M. Krzywonos, Journal of Environmental Studies 23, 2, 551-561(2014).
  • [3] M. Kucharski: Recykling metali nieżelaznych, Wydawnictwo AGH, Kraków 2010.
  • [4] J. Suiter, Al2O3 Oxide Morphology for Two Fe-Cr-Al. Stainless Steel Foils Used in Gasoline Engine Catalytic Converters. San Luis Obispo, June 2012, California Polytechnic State University, Materials Engineering Department.
  • [5] A. Fornalczyk, J. Cebulski, M. Saternus, J. Willner, Metalurgija 53, 4, 609-612 (2014).
  • [6] http://www.preciousmetals.umicore.com/recyclables/SAC/Service/Processes 01.04.2015.
  • [7] C. Hensel, R. Konieczny, R. Brück: Recycling Technology for Metallic Substrates: a Closed Cycle, Demet Recycling AG, 2010, Society of Automotive Engineers, Inc
  • [8] L. Kolditz, Chemia nieorganiczna, PWN, Warszawa 1994
  • [9] C. A. Nogueira, A. P. Paiva, P. C. Oliveira, M. C. Costa, A. M. Rosada Costa, Journal of Hazardous Materials 278, 82-90 (2014).
  • [10] B. Pospiech, Physicochemical Problems of Mineral Processing 48, 1, 239-246 (2012).
  • [11] T. N. Angelidis, Topics in Catalysis 16/17, 419-423 (2001).
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-068524f7-954e-4e14-933a-93826a39ae36
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.