“In-vitro” Tests on New Biodegradable Metallic Material Based on ZnMgY

• Autorzy: Panaghie Catalin , Cimpoesu Nicanor , Benchea Marcelin , Roman Ana-Maria , Manole Vasile , Alexandru Adrian , Cimpoesu Ramona , Cazacu Marius Mihai , Wnuk Izabela , Zegan Georgeta

Identyfikatory

DOI

10.24425/amm.2022.137794

• Języki publikacji: EN

Abstrakty

EN

Biodegradable materials represent a new class of biocompatible materials with applications in many medical cases where the support must be provided only for a certain period. In this article obtaining of ZnMgY alloy is presented along with some basic characteristic investigations like chemical composition (energy dispersive spectroscopy - EDS), microstructure (optical microscopy - OM and scanning and electron microscopy - SEM), immersion behavior in 10xDPBS (Dulbecco Phosphate Buffer Saline) solution (mass loss and surface degradation), electro-corrosion behavior (potentiostat with a three electrodes cell) and micro-hardness of the experimental alloy compared to cast Zn and ZnMg materials. The results present an improvement of micro-hardness of Zn by alloying with Mg and Y and a modification of corrosion resistance.

Słowa kluczowe

EN

biodegradable; tafel; potentiostat; micro-hardness; 10xDPBS

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 2
• Strony: 587--594
• Opis fizyczny: Bibliogr. 31 poz., fot., rys., tab., wykr.

Twórcy

autor

Panaghie Catalin

• Gheorghe Asachi University of Iasi, Faculty of Materials Science Engineering, Prof. dr. doc. D. Mangeron Str., no. 41, Iași 700050, Romania

• https://orcid.org/0000-0001-5407-3895

autor

Cimpoesu Nicanor

• Gheorghe Asachi University of Iasi, Faculty of Materials Science Engineering, Prof. dr. doc. D. Mangeron Str., no. 41, Iași 700050, Romania

• https://orcid.org/0000-0003-4373-017X

autor

Benchea Marcelin

• Gheorghe Asachi University of Iasi, Faculty of Mechanical Engineering, Prof. dr. doc. D. Mangeron Str., No. 61-63, Iași 700050, Romania

• https://orcid.org/0000-0001-9961-5125

autor

Roman Ana-Maria

• Gheorghe Asachi University of Iasi, Faculty of Materials Science Engineering, Prof. dr. doc. D. Mangeron Str., no. 41, Iași 700050, Romania

• https://orcid.org/0000-0001-8798-1849

autor

Manole Vasile

• Gheorghe Asachi University of Iasi, Faculty of Materials Science Engineering, Prof. dr. doc. D. Mangeron Str., no. 41, Iași 700050, Romania

• https://orcid.org/0000-0003-2221-300X

autor

Alexandru Adrian

• Gheorghe Asachi University of Iasi, Faculty of Materials Science Engineering, Prof. dr. doc. D. Mangeron Str., no. 41, Iași 700050, Romania

• https://orcid.org/0000-0001-7155-1238

autor

Cimpoesu Ramona

• Gheorghe Asachi University of Iasi, Faculty of Materials Science Engineering, Prof. dr. doc. D. Mangeron Str., no. 41, Iași 700050, Romania

• https://orcid.org/0000-0002-5128-4491

autor

Cazacu Marius Mihai

• Gheorghe Asachi University of Iasi, Department of Physics, Prof. dr. doc. D. Mangeron Str., No. 59A, Iași 700050, Romania

• https://orcid.org/0000-0002-7297-6411

autor

Wnuk Izabela

• Częstochowa University of Technology, Department of Physics, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland

• https://orcid.org/0000-0002-5751-1931

autor

Zegan Georgeta

• Grigore T. Popa University of Medicine and Pharmacy, Faculty of Dental Medicine, University Str., No. 16, Iași 700115, Romania

• https://orcid.org/0000-0002-6215-6583

Bibliografia

• [1] H. Yang, B. Jia, Z. Zhang, X. Qu, G. Li, W. Lin, D. Zhu, K. Dai, Y. Zheng, Alloying design of biodegradable zinc as promising bone implants for load-bearing applications, Nature Communications 11, 401 (2020).
• [2] H. Hermawan, Biodegradable Metals: State of the Art, Biodegradable Metals, Springer (2012).
• [3] Y.F. Zheng, X.N. Gu, F. Witte, Mat. Sci. Eng. R 77, 1-34 (2014).
• [4] A.V. Sandu, M.S. Baltatu, M. Nabialek, A. Savin, P. Vizureanu, Characterization and Mechanical Proprieties of New TiMo Alloys Used for Medical Applications, Materials 12 (18), 2973 (2019). DOI: https://doi.org/10.3390/ma12182973
• [5] S. Zhao, J.M. Seitz, R. Eifler, H.J. Maier, R.J. Guillory, E.J. Earley, A. Drelich, J. Goldman, J.W. Drelich, Mater. Sci. Eng. C 76, 301-312 (2017).
• [6] M.S. Baltatu, P. Vizureanu, A.V. Sandu, C. Munteanu, B. Istrate, Microstructural Analysis and Tribological Behavior of Ti-Based Alloys with a Ceramic Layer Using the Thermal Spray Method, Coatings 10 (12), 1216 (2020). DOI: https://doi.org/10.3390/coatings10121216
• [7] M.S. Dambatta, S. Izman, D. Kurniawan, H. Hermawan, Processing of Zn-3Mg alloy by equal channel angular pressing for biodegradable metal implants, J. King Saud Univ. Sci. 29 (4), 455-461 (2017).
• [8] P. Vizureanu, M. Nabialek, A.V. Sandu, B. Jez, Investigation into the effect of Thermal Treatment on the Obtaining of Magnetic Phases: Fe5Y, Fe23B6, Y2Fe14B and alpha Fe within the amorphous Matrix of Rapidly-Quenched Fe61+xCo10-xW1Y8B20 Alloys (Where x=0, 1 or 2), Materials 13 (4), 835 (2020). doi: https://doi.org/10.3390/ma13040835
• [9] H.F. Li, Z.Z. Shi, L.N. Wang, Opportunities and challenges of biodegradable zn-based alloys, Journal of Materials Science & Technology 46, 136-138 (2020).
• [10] P.K. Bowen, J. Drelich, J. Goldman, Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents, Adv. Mater. 25, 2577-2582 (2013).
• [11] D. Vojtech, J. Kubasek, J. Serak, P. Novak, Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation, Acta Biomater. 7, 3515-3522 (2011).
• [12] K. Kaur, R. Gupta, S.A. Saraf, S.K. Saraf, Zinc: the metal of life, Compr. Rev. Food Sci. Food Saf. 13 (4), 358-376 (2014).
• [13] G. Li, H. Yang, Y. Zheng, X.H. Chen, J.A. Yang, D. Zhu, L. Ruan, K. Takashima, Challenges in the use of zinc and its alloys as bio-degradable metals: Perspective from biomechanical compatibility Acta Biomaterialia, 97, 23-45 (2019).
• [14] S. Zhao, J.M. Seitz, R. Eifler, H.J. Maier, R.J. Guillory 2nd, E.J. Earley, A. Drelich, J. Goldman, J.W. Drelich, Zn-Li alloy after extrusion and drawing: structural, mechanical characterization, and biodegradation in abdominal aorta of rat, Mater. Sci. Eng. C Mater. Biol. Appl. 76, 301-312 (2017).
• [15] J. Niu, Z. Tang, H. Huang, J. Pei, H. Zhang, G. Yuan, W. Ding, Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application, Mater. Sci. Eng. C Mater. Biol. Appl. 69, 407-413 (2016).
• [16] H.F. Li, X.H. Xie, Y.F. Zheng, Y. Cong, F.Y. Zhou, K.J. Qiu, X. Wang, S.H. Chen, L. Huang, L. Tian, L. Qin, Development of biodegradable ZN-1X binary alloys with nutrient alloying elements Mg, Ca and Sr, Sci. Rep. 5, 10719 (2015).
• [17] H. Yang, B. Jia, Z. Zhang, X. Qu, G. Li, W. Lin, D. Zhu, K. Dai, Y. Zheng, Alloying design of biodegradable zinc as promising bone implants for load-bearing applications, Nature Communications 11, 401 (2020).
• [18] T. Ren, X. Gao, C. Xu, L. Yang, P. Guo, H. Liu, Y. Chen, W. Sun, Z. Song, Evaluation of as-extruded ternary Zn-Mg-Zr alloys for biomedical implantation material: in vitro and in vivo behavior, Materials and Corrosion, (2018). DOI: https://doi.org/10.1002/maco.201810648
• [19] Hunan High Broad New Material, Co.Ltd. Available online: http://www.hbnewmaterial.com/supplier-129192-master-alloy (accessed on 10 june 2019).
• [20] M.A. Bernevig-Sava, D.C. Darabont, M. Lohan, E. Mihalache, C. Bejinariu, Selection and verification of personal protective equipment in the context of current legal requirements, Quality - Access to success 20, 109-112 (2019).
• [21] C. Baciu, C. Bejinariu, D.C. Darabont, A. Corăbieru, M.A. Bernevig-Sava, Occupational safety and health audit between theory, legal requirements and practice, Quality - Access to Success 20, 113-116 (2019).
• [22] J. Zhu, X.H. Chen, L. Wang, W.Y. Wang, Z.K. Liu, J.X. Liu, X.D. Hui, High Strength Mg-Zn-Y alloys reinforced synergistically by Mg12ZnY phase and Mg3Zn3Y2 particle, J. Alloy Compd. 703, 508-516 (2017).
• [23] M. Dias, C. Brito, F. Bertelli, O. L. Rocha, A. Garcia, Interconnection of thermal parameters, microstructure, macrosegregation and microhardness of unidirectionally solidified Zn-rich Zn-Ag peritectic alloys, Materials and Design 63, 848-855 (2014).
• [24] C. Yao, Z. Wang, S. L. Tay, T. Zhu, Wei Gao, Effects of Mg on microstructure and corrosion properties of Zn-Mg alloy, Journal of Alloys and Compounds 602, 101-107 (2014).
• [25] G. Kastiukas, X. Zhou, Asce, M., Babar Neyazi, K.T. Wan, Sustainable Calcination of Magnesium Hydroxide for Magnesium Oxychloride Cement Production, J. Mater. Civ. Eng. 31 (7), (2019).
• [26] W. Gu, S. Zhai, Z. Liu, F. Teng, Effect of coordination interaction between water and zinc on photochemistry property of Zn3(PO4)2·2H2O, Chemical Physics 536, 110811 (2020).
• [27] Tables of Standard Electrode Potentials: by G. Milazzo and S. Caroli, John Wiley, Chichester and New York, 1978, pp. xvi+421, price £17.50, J. Mol. Struct. 54, 307e308, (1979). DOI: https://doi.org/10.1016/0022-2860(79)80084-8
• [28] G. Shao, V. Varsani, Z. Fan, Thermodynamic modelling of the Y-Zn and Mg-Zn-Y systems, Calphad. 30, 286-295 (2006). (2020).
• [29] D.P. Burduhos-Nergis, P. Vizureanu, A.V. Sandu, C. Bejinariu, Evaluation of the Corrosion Resistance of Phosphate Coatings Deposited on the Surface of the Carbon Steel used for Carabiners Manufacturing, Applied Sciences-Basel. 10 (8), 2753 (2020).
• [30] H. Zhou, R. Hou, J. Yang, Y. Sheng, Z. Li, L. Chen, W. Li, X. Wang, Influence of Zirconium (Zr) on the microstructure, mechanical, properties and corrosion behavior of biodegradable zinc-magnesium alloys, J. Alloy. Compd. 840, 155792.
• [31] D.P. Burduhos-Nergis, A.V. Sandu, D.D. Burduhos-Nergis, D.C. Darabont, R.I. Comaneci, C. Bejinariu, Shock Resistance Improvement of Carbon Steel Carabiners Used at PPE, MATEC Web Conf. 290, 12004 (2019). DOI: https://doi.org/10.1051/matecconf/201929012004

Uwagi

1, A part of this work was supported by a grant of the Romanian Ministry of Education and Research, CNCS - UEFISCDI, project number PN-III-P1-1.1-TE-2019-1921, within PNCDI III.

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).