Measurement System for Assesment of Motor Cylinder Tolerances and Roundness

• Autorzy: Jermak C. J. , Dereżyński J. , Rucki M.

Identyfikatory

DOI

10.24425/118164

• Języki publikacji: EN

Abstrakty

EN

The paper describes the concept of a novel measurement system designed for quick and inexpensive measurement of tolerances and assessment of roundness, especially suitable for the motor industry. The structure of measurement system and its algorithm of measurement data analysis are described in detail. The system underwent tests with the setting (master) rings of known tolerances and out-of-roundness. The results were compared with those obtained from the reference device PIK-2. The tested system exhibited a very good accuracy and proved to be a good measurement tool. It was implemented in the industrial enterprise.

Słowa kluczowe

EN

precision; measurement; accuracy; roundness; automation

• Wydawca: Komitet Metrologii i Aparatury Naukowej PAN
• Czasopismo: Metrology and Measurement Systems
• Rocznik: 2018
• Tom: Vol. 25, nr 1
• Strony: 103--114
• Opis fizyczny: Bibliogr. 19 poz., rys., tab., wykr., wzory

Twórcy

autor

Jermak C. J.

• Poznan University of Technology, Institute of Mechanical Technology, Pl. M. Sklodowskiej-Curie 5, 60-965 Poznań, Poland

autor

Dereżyński J.

• Poznan University of Technology, Institute of Mechanical Technology, Pl. M. Sklodowskiej-Curie 5, 60-965 Poznań, Poland

autor

Rucki M.

• Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Mechanical Engineering, Krasickiego 54, 26-600 Radom, Poland

Bibliografia

• [1] Shim, H.B. (2015). Measurement of shape error for the optimal blank design of stamped part with 3 dimensional contour lines. Int. J. Precis. Eng. Manuf., 16(13), 2665-2672.
• [2] Wen, X., Zhao, Y., Wang, D., Pan, J. (2013). Adaptive Monte Carlo and GUM methods for the evaluation of measurement uncertainty of cylindricity error. Precis. Eng., 37(4), 856-864.
• [3] Osanna, P.H., Durakbasa, N.M., Cakmakci, M, Oberländer, R. (1992). Cylindricity - a well known problem and new solutions. Int. J. Mach. Tools Manuf., 32(1-2), 91-97.
• [4] Lai, H., Jywe, W., Chen, Ch., Liu, Ch. (2000). Precision modeling of form errors for cylindricity evaluation using genetic algorithms. Precis. Eng., 24, 310-319.
• [5] Herrera-Navarro, A.M., Jiménez-Hernández, H., Terol-Villalobos, I.R. (2013). Framework for characterizing circularity based on a probability distribution. Measurement, 46, 4232-4243.
• [6] Shi, S., Lin, J., Wang, X., Zhao, M. (2016). A hybrid three-probe method for measuring the roundness error and the spindle error. Precis. Eng., http://dx.doi.org/10.1016/j.precisioneng.2016.03.020
• [7] Ma, H., Zhuang, Ch., Xiong, Zh. (2015). Multipoint recursive sequential three-point method for on-machine roundness measurement. Procedia CIRP., 31, 459-464.
• [8] Stępień, K. (2014). In situ measurement of cylindricity - Problems and solutions. Precis. Eng., 38(3), 697-701.
• [9] Adamczak, S., Janecki, D., Stępień K. (2010). Qualitative and quantitative evaluation of the accuracy of the V-block method of cylindricity measurements. Precis. Eng., 34, 619-626.
• [10] Adamczak, S., Zmarzły, P., Janecki, D. (2015). Theoretical and practical investigations of V-block waviness measurement of cylindrical parts. Metrol. Meas. Syst., 12(2), 181-192.
• [11] Jermak, Cz.J., Rucki, M. (2016). Static Characteristics of Air Gauges Applied in the Roundness Assessment. Metrol. Meas. Syst., 23(1), 85-96.
• [12] Stępień, K., Janecki, D., Adamczak, S. (2011). Investigating the influence of selected factors on results of V-block cylindricity measurements. Measurement., 44(4), 767-777.
• [13] Jermak, Cz.J., Dereżyński, J. (2015). Device for measuring the diameter and the roundness deviation of internal cylindrical surfaces. Polish patent, PAT.221405, 20.05.2015.
• [14] ISO/TS 12181-1:2003 Geometrical Product Specification (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness.
• [15] Evaluation of measurement data - An introduction to the “Guide to the expression of uncertainty in measurement” and related documents. BIPM JCGM 104:2009.
• [16] Jermak, Cz. J., Rucki, M. (2012). Air Gauging: Static and Dynamic Characteristics . IFSA, Barcelona.
• [17] Piotrowski, J., Kostyrko, K. (2012). Calibration of measuring equipment. Warsaw: PWN.
• [18] Pollard, J.H. (1977). A Handbook of Numerical and Statistical Techniques. Cambridge: Cambridge University Press.
• [19] ISO/IEC 98-3 (2008). Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement. JCGM 100.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).